Livoo TEA303 User Manual

The Livoo TEA303 is a compact and efficient electric tea maker designed for home use. It features a stainless steel body, a 1.2-liter capacity, a removable filter, an automatic keep-warm function, a water level indicator, and a safety lid lock. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Using the Tea Maker 7. Cleaning & Maintenance 8. Safety Features 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel body, Removable filter, Water level indicator, Power base with cord storage, Control panel with LED indicators.

Feature	Description
Capacity	1.2 liters (approx. 4-6 cups)
Power	800W for fast boiling
Material	Stainless steel body, BPA-free plastic parts
Filter	Removable and washable mesh filter
Keep-Warm	Automatic 30-minute keep-warm function
Water Level Indicator	Clear markings for precise water measurement
Safety Lock	Lid locks during operation to prevent spills
Cord Storage	Integrated storage in power base
Indicator Lights	Power and keep-warm LEDs
Dimensions	Approx. 20cm x 15cm x 25cm

Installation

Unpack and inspect contents. Place on a stable, dry, and heat-resistant surface.

Remove all packaging materials and stickers.
Wash the removable parts (kettle, lid, filter) with warm soapy water and dry thoroughly.
Place the power base on a flat surface near a power outlet.
Ensure the kettle is properly seated on the power base before plugging in.

WARNING! Do not immerse the power base, cord, or plug in water. Keep the cord away from hot surfaces.

First-Time Setup

Before first use, it is recommended to perform an initial cleaning cycle.

Fill the kettle with clean water up to the maximum mark.
Place the kettle on the power base and plug into a 220-240V AC outlet.
Press the power button to boil the water.
Once boiled, discard the water. Repeat once more to remove any manufacturing residues.
Your Livoo TEA303 is now ready for use.

CAUTION! Never operate the kettle without water. Always fill between the MIN and MAX marks.

Specifications

Model: TEA303
Capacity: 1.2 Liters
Power Rating: 800W, 220-240V AC, 50/60Hz
Body Material: Stainless Steel
Filter: Removable fine mesh
Functions: Boil, Automatic Keep-Warm (30 min)
Safety Features: Auto shut-off, boil-dry protection, safety lid lock
Cord Length: 0.8 meters
Weight: 1.1 kg (empty)

Controls and Settings

The control panel is located on the power base.

Power Button (I/O): Press to start boiling. The appliance will automatically shut off when water reaches boiling point. The keep-warm function will then activate for 30 minutes.

LED Indicators:
Red Light: Illuminates when boiling is in progress.
Green Light: Illuminates when the keep-warm function is active.

Manual Override: You can cancel the keep-warm function at any time by pressing the power button again or by lifting the kettle from the base.

Using the Tea Maker

Follow these steps to make tea.

Fill: Open the lid and fill the kettle with fresh, cold water. Do not exceed the MAX mark.
Add Tea: Place loose tea leaves or tea bags into the removable filter. Insert the filter into the kettle.
Close Lid: Ensure the lid is securely closed and locked.
Boil: Place the kettle on the power base and press the power button. The red LED will light up.
Steep: Once boiling is complete (automatic shut-off), let the tea steep for the recommended time (3-5 minutes).
Serve: Remove the filter with tea leaves/bags. Pour tea. The green keep-warm LED will keep the remaining tea warm for 30 minutes.

Tip: For best results, use filtered water and pre-warm the kettle with hot water before making tea.

Cleaning & Maintenance

Unplug and allow to cool completely before cleaning.

Exterior: Wipe the stainless steel body with a soft, damp cloth. Do not use abrasive cleaners.
Interior & Filter: Wash the kettle, lid, and filter with warm soapy water. Rinse thoroughly. Limescale can be removed with a mixture of water and vinegar (1:1), boiled and then discarded. Rinse well afterwards.
Power Base: Wipe with a dry cloth only. Never immerse in water.

CAUTION! Do not use harsh chemicals, steel wool, or scouring pads. Never immerse the appliance in water.

Safety Features

Auto Shut-Off: Turns off automatically when water reaches boiling point or if the kettle is empty (boil-dry protection).

Safety Lid Lock: The lid locks during operation to prevent hot water from splashing out.

Heat-Resistant Handle: Stays cool to the touch during use.

Concealed Heating Element: Prevents direct contact with the heating plate for easier cleaning.

Regulatory Information

This appliance complies with EU safety standards (EN 60335). The symbol of the crossed-out wheeled bin indicates that the product must be disposed of separately from household waste at the end of its life. For support, visit www.livoo.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Kettle does not turn on	Not plugged in / No power	Check power outlet and plug connection. Ensure kettle is properly seated on base.
Water does not boil	Insufficient water / Limescale	Fill water between MIN and MAX marks. Descale the kettle.
Kettle switches off prematurely	Boil-dry protection activated	Unplug, let cool, and refill with water before use.
Leaking water	Overfilled / Lid not closed properly	Do not exceed MAX mark. Ensure lid is securely locked.
Unusual noise or smell	First-time use / Limescale	Perform initial cleaning cycles. Descale the appliance.
Keep-warm function not working	Function cancelled / Timer ended	The function lasts 30 minutes. Ensure kettle is on base after boiling.

Reset: Unplug the appliance for 10 minutes to reset the electronic control.

Service: Do not attempt to repair the appliance yourself. For service, contact authorized Livoo service centers.