Lippert Furrion FSFP37MW2-BL User Manual

The Lippert Furrion FSFP37MW2-BL is a 37-inch outdoor pedestal mount electric fireplace with a modern black finish, featuring realistic LED flame effects, adjustable brightness and temperature settings, remote control operation, safety overheat protection, and a durable weather-resistant design suitable for patios, decks, or covered outdoor areas. Powered by 120V AC. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation & Remote Control 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Powder-coated steel pedestal, LED flame effect panel, heating element, Remote Control, Power cord, Control panel with touch buttons.

Feature	Description
Flame Effect	Adjustable LED flames with multiple color and brightness settings
Heating Element	Ceramic heating with two heat settings (750W/1500W)
Remote Control	Wireless remote for all functions (batteries included)
Control Panel	Touch-sensitive buttons for manual operation
Timer Function	Auto shut-off timer from 30 minutes to 9 hours
Overheat Protection	Automatic cut-off if unit overheats
Weather Resistance	IP34 rated for outdoor use in covered areas
Mounting	Freestanding pedestal design with weighted base
Power Indicator	LED power light on control panel
Child Lock	Safety feature to prevent accidental operation

Installation

Unpack and inspect all components. Ensure installation area is level and protected from direct rain.

Assemble pedestal: Attach fireplace unit to weighted base using provided hardware.
Position unit: Place on stable, level surface in covered outdoor area.
Clearance: Maintain minimum 3 feet clearance from combustible materials.
Power connection: Plug into dedicated 120V GFCI outlet.

WARNING! Unit is heavy; use two people for assembly and positioning. Ensure proper clearance from walls and furniture.

First-Time Setup

After installation, perform initial setup before first use.

Power on: Plug into outlet, press POWER button on control panel or remote.
Flame settings: Adjust flame brightness and color using FLAME button.
Heat settings: Select desired heat level (Low, High, or Heat Off).
Timer setup: Set auto shut-off timer if desired.
Child lock: Enable if children are present.

CAUTION! Do not use in fully exposed outdoor areas. Ensure outlet is GFCI protected.

Specifications

Model: FSFP37MW2-BL
Dimensions: 37" H x 28" W x 10" D
Weight: 55 lbs
Power: 120V AC, 60Hz, 12.5A max
Heat Output: 5120 BTU (1500W setting)
Heating Coverage: Up to 400 sq ft
Flame Effects: 12 color options, 5 brightness levels
Timer: 30 min to 9 hours in 30-min increments
Remote Range: Up to 20 feet
Weather Rating: IP34 (splash resistant)

Controls and Settings

Control Panel (touch buttons): POWER, FLAME, HEAT, TIMER, LOCK.

Remote Control: POWER, FLAME, TEMP (heat up/down), TIMER, LOCK, LIGHT (flame color).

Flame Settings: Cycle through 12 colors with LIGHT button; adjust brightness with FLAME button. Heat Settings: Low (750W), High (1500W), or flame-only mode. Timer: Press TIMER repeatedly to set duration (0.5-9 hrs). Child Lock: Press and hold LOCK for 3 seconds to enable/disable.

Connecting to Power

Requires dedicated 120V GFCI outlet. Do not use extension cords.

Ensure unit is OFF before plugging in.
Plug power cord directly into GFCI outlet.
Check that outlet is properly grounded.
Keep cord away from high traffic areas.

Tip: Test GFCI outlet monthly by pressing TEST button.

Operation & Remote Control

Remote requires 2 AAA batteries (included).

Power: Press POWER to turn unit on/off.
Flame adjustment: Use FLAME button for brightness, LIGHT for color.
Heat control: TEMP buttons adjust heat level; display shows setting.
Timer: Set auto shut-off; unit beeps when timer expires.
Memory function: Remembers last settings when powered on.

WARNING! Keep remote away from moisture. Replace batteries if remote becomes unresponsive.

Safety Features

Overheat Protection: Automatic shut-off if internal temperature exceeds safe limit. Tip-Over Switch: Turns unit off if knocked over. Cool-touch Exterior: Surface remains safe to touch during operation. Child Lock: Prevents accidental activation.

Care & Cleaning

Unplug and cool completely before cleaning. Wipe exterior with soft, damp cloth. Do not use abrasive cleaners.

CAUTION! Never immerse unit in water. Do not use harsh chemicals that may damage finish.

Regulatory Information

UL Listed for outdoor use. FCC Part 15 compliant. CSA certified. Copyright © 2023 Lippert Components, Inc. Furrion is a registered trademark. For support, visit www.furrion.com or contact 1-574-294-6997.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	No power	Check outlet; reset GFCI; ensure plug is secure.
No heat output	Thermostat/overheat	Wait for cool-down; check heat setting; ensure vents not blocked.
Flames not working	LED issue	Check flame settings; power cycle unit; contact support.
Remote not working	Batteries/obstructions	Replace batteries; ensure clear line of sight to unit.
Unit shuts off automatically	Overheat/timer	Check for blocked vents; ensure proper clearance; check timer setting.

Reset: Unplug for 5 minutes, then reconnect.

Service: 1-574-294-6997; www.furrion.com