Link2Home 6820F Manual

The Link2Home 6820F is a versatile home automation hub designed for seamless integration with smart home devices. It features Wi-Fi and Bluetooth connectivity, support for multiple protocols (Zigbee, Z-Wave), a built-in speaker and microphone, voice control compatibility, mobile app management, scheduling and automation routines, energy monitoring, and security alerts. Powered by standard USB-C (5V/2A). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Central Hub Unit, Power Adapter, Quick Start Guide, Ethernet Cable. Front Panel: Status LED, Pairing Button, Microphone Mute Switch.

Feature	Description
Wi-Fi Connectivity	Dual-band 2.4GHz/5GHz for network connection
Bluetooth 5.0	For direct device pairing and control
Zigbee & Z-Wave Radio	Support for smart sensors, lights, and locks
Built-in Speaker	For voice feedback and alerts
Microphone Array	For voice command reception
Ethernet Port	Wired network connection option
USB-C Power Port	For power supply connection
Status LED	Indicates power, network, and pairing status
Pairing Button	Initiates device discovery and pairing mode
Microphone Mute	Physical switch to disable microphone

Installation

Unpack and inspect contents. Choose a central location for optimal wireless coverage.

1. Connect to power: Plug the USB-C power adapter into the hub and a wall outlet.
2. Connect to network: Use Wi-Fi (via app) or Ethernet cable for internet access.
3. Place the hub: Position on a stable surface, away from metal objects and other electronics.
4. Power on: The status LED will illuminate.

WARNING! Use only the provided power adapter. Ensure adequate ventilation around the hub.

First-Time Setup

Power on the hub; download the "Link2Home" app from your device's app store.

1. Create an account: Open the app and follow prompts to create a user account.
2. Add your hub: In the app, select "Add Device," choose "Hub," and follow on-screen instructions.
3. Connect to Wi-Fi: Enter your network credentials when prompted by the app.
4. Update firmware: The app will check for and install any available updates.

CAUTION! Keep the hub away from water and extreme temperatures during setup.

Specifications

• Model: Link2Home 6820F Smart Hub.
• Connectivity: Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, Zigbee 3.0, Z-Wave 800 Series.
• Audio: Integrated 1.5" speaker, 3-microphone array with noise cancellation.
• Ports: USB-C (Power), Gigabit Ethernet, 3.5mm Audio Out (for external speaker).
• Power: 5V/2A via USB-C power adapter (included).
• Operating Range: Zigbee/Z-Wave: Up to 100 ft indoors (obstacles may reduce range).
• Supported Devices: Lights, plugs, sensors, locks, thermostats (compatible brands).
• Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Primary control is via the Link2Home mobile app. Physical Controls: Pairing Button, Microphone Mute Switch.

App Dashboard: Device list, Scenes, Routines, Energy Monitor, Security Settings.

Device Settings: Rename devices, assign rooms, adjust parameters (e.g., light brightness). Automation: Create routines based on time, sensor triggers, or voice commands. Security: Set up alerts for door/window sensors, cameras. Voice Control: Link to Amazon Alexa or Google Assistant accounts. Network: View connection status, change Wi-Fi settings.

Connecting Devices

Supports adding smart lights, plugs, sensors, locks, and more.

1. Put device in pairing mode: Refer to the device's manual (usually involves pressing a button).
2. Open Link2Home app: Tap "+" or "Add Device."
3. Select device type: The app will search for nearby devices.
4. Follow prompts: Name the device and assign it to a room.

Tip: Ensure the smart device is within range (approx. 30 ft) of the hub during pairing.

Using Automation Features

Create routines to automate multiple devices with a single trigger.

1. Open Routines: In the app, go to the "Automation" tab.
2. Create New: Tap "Create Routine."
3. Set Trigger: Choose from Time, Device Status (e.g., sensor triggered), or Voice Command.
4. Add Actions: Select which devices to control and what state to set (e.g., turn lights on, adjust thermostat).
5. Save: Name your routine and activate it.
6. Test: Manually trigger the routine to verify it works.
7. Edit/Delete: Manage routines from the Automation tab.

WARNING! Test security-related routines (like door locks) thoroughly before relying on them.

Voice Control Setup

Integrate with Amazon Alexa or Google Assistant for voice commands.

1. Enable Skill/Action: In your Alexa or Google Home app, search for "Link2Home" skill/action and enable it.
2. Link Account: Log in with your Link2Home app credentials when prompted.
3. Discover Devices: Ask your voice assistant to "discover devices." The hub will sync your devices.
4. Control: Use voice commands like "Alexa, turn on the living room lights."

Note: Microphone on the hub must be unmuted (switch position) for it to respond to "Hey Link2Home" commands if supported.

Care & Cleaning

Unplug before cleaning. Use a soft, dry, lint-free cloth. Do not use liquids or compressed air.

CAUTION! Avoid getting moisture into ports or vents. Do not disassemble the unit.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. ICES-003: Compliant. This device complies with Industry Canada licence-exempt RSS standard(s). Contains FCC ID: [To be filled by applicant]. Contains IC: [To be filled by applicant]. For support, visit www.link2home.com/support or contact 1-800-555-6820.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Hub not powering on	Power connection	Check USB-C cable and adapter are firmly connected; try a different outlet.
Cannot connect to app	Wi-Fi/Network	Ensure hub is within router range; restart hub and router; check app login.
Device not pairing	Range/Battery/Pairing Mode	Move device closer to hub; replace device batteries; ensure device is in pairing mode.
Voice commands not working	Microphone/Integration	Check microphone mute switch; re-link voice assistant account in app.
Routine not executing	Trigger/Internet	Check routine is enabled; verify internet connection; edit and re-save routine.

Reset: Press and hold pairing button for 15 seconds to factory reset (erases all settings).

Service: 1-800-555-6820; www.link2home.com/support