Laser SmartHome LSH-ODSLR-5W User Manual

The Laser SmartHome LSH-ODSLR-5W is a 5W smart outdoor security light with motion detection, daylight sensor, adjustable sensitivity and duration, Wi-Fi connectivity for app control, multiple lighting modes (constant, motion-activated, scheduled), IP65 weatherproof rating, and energy-efficient LED technology. It operates on 120-240V AC and is designed for perimeter security and area illumination. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Smart Home 7. Operating Modes 8. Maintenance & Care 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel, PIR motion sensor, daylight sensor, Wi-Fi module, adjustable mounting bracket, weatherproof housing.

Feature	Description
Motion Detection	PIR sensor detects movement up to 30 feet
Daylight Sensor	Automatically turns off during daylight hours
Wi-Fi Connectivity	Connects to home network for app control
Lighting Modes	Constant On, Motion-Activated, Scheduled
Adjustable Settings	Sensitivity, duration, brightness levels
Weatherproof Rating	IP65 for outdoor use in all weather conditions
Power Input	120-240V AC, 50/60Hz
Mounting Bracket	Adjustable for optimal angle positioning
LED Technology	Energy efficient with 50,000 hour lifespan
Smart Home Integration	Works with Laser SmartHome app

Installation

Unpack and inspect contents. Choose suitable outdoor location.

Turn off power: Ensure circuit breaker is switched off at main panel.
Mount bracket: Use provided screws to secure bracket to wall or eave.
Connect wiring: Follow color coding (black to hot, white to neutral, green to ground).
Attach light: Secure light unit to bracket and tighten adjustment screws.
Restore power: Turn circuit breaker back on.

WARNING! Electrical installation should be performed by qualified electrician. Ensure power is off before installation.

First-Time Setup

Power on light; follow setup procedure.

Download app: Install "Laser SmartHome" from App Store or Google Play.
Create account: Register with email address in app.
Add device: Select "Add New Device" and choose LSH-ODSLR-5W from list.
Connect to Wi-Fi: Follow in-app instructions to connect light to 2.4GHz network.
Configure settings: Set initial preferences for sensitivity, duration, and mode.

CAUTION! Ensure stable mounting surface; use appropriate fasteners for your wall type.

Specifications

Power Output: 5W LED equivalent to 50W halogen.
Light Color: 4000K cool white.
Lumen Output: 500 lumens.
Detection Range: Up to 30 feet, 120° angle.
Duration Settings: 10 seconds to 30 minutes.
Sensitivity: Low, Medium, High settings.
Weather Resistance: IP65 rated.
Operating Temperature: -20°C to 40°C (-4°F to 104°F).
Wi-Fi Standard: 802.11 b/g/n 2.4GHz.
Dimensions: 8.5" x 5.5" x 3.5".

Controls and Settings

Access controls via physical unit or SmartHome app. Physical Controls: Manual override switch, test button.

App Controls: On/Off, Mode selection, Schedule setting, Sensitivity adjustment, Duration setting, Brightness control.

Lighting Modes: CONSTANT (always on), MOTION (activates on detection), SCHEDULE (time-based operation). Sensitivity: Adjust detection range (Low/Medium/High). Duration: Set how long light stays on after activation (10s-30min). Schedule: Set specific on/off times for automated operation.

Connecting to Smart Home

Wi-Fi: 2.4GHz network required. App: Laser SmartHome available for iOS and Android.

Ensure light is powered on and in setup mode (LED blinking).
Open app and follow "Add Device" wizard.
Select your Wi-Fi network and enter password.
Wait for connection confirmation (solid LED).
Assign device name and location in app.

Tip: Ensure router is within 30 feet of light for strong signal during setup.

Operating Modes

Three primary operating modes for different security needs.

Constant Mode: Light remains on continuously until manually turned off.
Motion Mode: Light activates when motion is detected, stays on for set duration.
Schedule Mode: Light turns on/off at predetermined times regardless of motion.
Test Mode: Press test button to verify motion sensor and light operation.
Manual Override: Use physical switch for immediate on/off control.

WARNING! Do not look directly at LED light source. Adjust angle to avoid glare.

Maintenance & Care

Turn off power before maintenance. Clean lens with soft, dry cloth only.

CAUTION! Do not use chemicals, abrasives, or water jets. Ensure seals are intact for weatherproofing.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for outdoor use. Copyright © 2023 Laser SmartHome; trademarks of Laser Technologies Inc. For support, visit www.lasersmarthome.com or contact 1-800-555-LASER.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light not turning on	Power supply	Check circuit breaker; verify wiring connections; ensure power is on.
No motion detection	Sensor settings/obstructions	Adjust sensitivity; clear obstructions from sensor area; check detection range.
Wi-Fi connection lost	Network issues	Restart router; move closer to access point; re-pair device in app.
App not controlling light	Connection/account	Ensure phone is on same network; log out and back into app; restart app.
Light stays on constantly	Mode setting/daylight sensor	Check mode setting; clean daylight sensor; adjust schedule if in schedule mode.

Reset: Hold test button for 10 seconds to factory reset (LED will blink rapidly).

Service: 1-800-555-LASER; www.lasersmarthome.com/support