Komodo KDSLR160PNLA User Manual

The Komodo KDSLR160PNLA is a 16-inch Digital SLR Monitor with Full HD resolution, built-in HDMI and VGA inputs, integrated color calibration sensor, SD card slot for photo preview, headphone jack, remote control, on-screen display (OSD) menu, multiple color profiles, power saving mode, and brightness/contrast adjustments. Powered by 100-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using SD Card Preview 8. Color Calibration 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: IPS LCD panel with integrated color sensor, Remote Control, HDMI INPUT, VGA INPUT, SD card slot, Headphone jack, USB service port.

Feature	Description
HDMI INPUT	For digital video/audio connection from cameras or computers
VGA INPUT (PC input) port	For analog computer video connection
3.5mm AUDIO IN jack	For external audio input
Headphone jack	For private audio monitoring
AC input connector	For universal power connection (100-240V)
SD card slot	For direct photo preview from camera memory cards
COLOR SENSOR	Built-in sensor for automatic color calibration
POWER	Turns monitor on/off
MENU	Accesses OSD settings
INPUT SELECT	Cycles through available input sources

Installation

Unpack and inspect contents. Place on stable, level surface.

Connect video source: Use HDMI cable for digital connection or VGA for analog.
Connect audio: Use 3.5mm audio cable if needed.
Insert SD card: For direct photo preview functionality.
Plug into AC power using included power adapter.

WARNING! Monitor is fragile; handle with care to avoid screen damage. Ensure all connections are secure before powering on.

First-Time Setup

Power on monitor; follow initial setup prompts.

Select input source: Press INPUT SELECT to choose HDMI or VGA.
Set language: In OSD menu, select preferred language (default ENGLISH).
Adjust basic settings: Use OSD for brightness, contrast, and color temperature.
Calibrate colors: Run auto-calibration using built-in sensor for accurate colors.

CAUTION! Ensure proper ventilation around monitor; do not block rear vents.

Specifications

Screen Size: 16 inches IPS LCD.
Resolution: Full HD 1920x1080.
Color Accuracy: ΔE < 2 with calibration, 99% sRGB coverage.
Inputs: HDMI, VGA, 3.5mm audio, SD card slot.
Color Profiles: sRGB, Adobe RGB, DCI-P3, User Custom.
Power Saving: Auto sleep mode after 15 minutes of inactivity.
Power Source: 100-240V AC, 50/60Hz universal adapter.
Operating Temp: 0°C to 40°C (32°F to 104°F).

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, MENU, INPUT SELECT, navigation buttons.

Remote: POWER, INPUT SELECT, MENU, navigation arrows, ENTER, PROFILE buttons, CALIBRATE.

Picture: BRIGHTNESS, CONTRAST, COLOR TEMP (5000K, 6500K, 9300K), GAMMA (2.2, 1.8, sRGB). Color: COLOR PROFILE selection, individual RGB adjustment, saturation. System: Language, auto power off, OSD timeout, reset to factory. Calibration: Auto calibration, manual calibration, profile save/load.

Connecting Devices

HDMI: For digital cameras, computers, media players. VGA: For older computers. SD Card: Direct photo preview.

Turn off monitor and devices before connecting.
Match cables to correct ports (HDMI to HDMI, etc.).
Select input via INPUT SELECT button (HDMI, VGA, SD PREVIEW).

Tip: Use high-quality HDMI cables for best digital signal quality.

Using SD Card Preview

Supports JPEG, RAW preview from camera SD cards.

Insert card: Push SD card into slot until click.
Select mode: Press INPUT SELECT until SD PREVIEW appears.
Navigate photos: Use arrow buttons to browse images.
Zoom: Press ENTER to zoom in/out on selected photo.
Delete: Press MENU and select DELETE option (single or all).
Information: Display EXIF data including aperture, shutter speed, ISO.
Slide show: Auto-advance through photos at set intervals.

WARNING! Do not remove SD card while accessing; use proper eject procedure. Format cards in camera only.

Color Calibration

Auto Calibration: Use built-in sensor for accurate colors. Manual Calibration: Adjust RGB values individually. Save Profiles: Store up to 3 custom color profiles.

Care & Cleaning

Unplug before cleaning. Use microfiber cloth only; for stubborn marks, dampen cloth slightly with water only.

CAUTION! Never use alcohol, ammonia, or abrasive cleaners on screen. Do not spray liquids directly on monitor.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2023 Komodo Imaging; trademarks of Komodo Digital Solutions, Inc. For support, visit www.komodoimaging.com/support or contact 1-800-555-IMAG (4624).

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Power/connections	Check power connection; ensure input source is selected correctly; verify cable connections.
Colors inaccurate	Calibration/profile	Run auto-calibration; check color profile setting; reset to factory defaults.
SD card not reading	Card format/damage	Ensure card is properly inserted; try different card; format in camera (backup first).
Flickering image	Cable/refresh rate	Check cable connections; adjust refresh rate in source device; try different cable.
Dead pixels	Manufacturing	Check warranty; contact support if exceeding acceptable limits (varies by region).

Reset: Menu > System > Factory Reset if experiencing persistent issues.

Service: 1-800-555-IMAG (4624); www.komodoimaging.com/support