Kings Adventure AKSR-PN160W-03 User Manual

The Kings Adventure AKSR-PN160W-03 is a 160W portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. It features a high-capacity lithium-ion battery, multiple output ports (AC, DC, USB), solar charging capability, LCD display for status monitoring, built-in safety protections, and lightweight portable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, LCD display, AC output ports, DC output ports, USB ports, Solar charging input, Power button, LED indicators.

Feature	Description
AC Output	Pure sine wave AC outlet for sensitive electronics
DC Output	12V carport for DC devices
USB Ports	USB-A and USB-C for charging mobile devices
Solar Charging Input	For connecting solar panels (MC4 connector)
LCD Display	Shows battery level, input/output power, and status
LED Work Light	Built-in emergency light with multiple modes
Power Button	Turns unit on/off
Battery Level Indicator	LED lights showing remaining capacity
Overload Protection	Automatic shutdown on overload
Portable Handle	For easy transportation

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to power station and wall outlet for full charge.
Solar Panel Setup: Connect compatible solar panel to solar input port (MC4 connector).
Device Connection: Connect devices to appropriate output ports (AC, DC, USB).
Power On: Press and hold power button for 3 seconds to activate.

WARNING! Keep away from water and extreme temperatures. Ensure proper ventilation during use.

First-Time Setup

Power on unit; monitor LCD display for status.

Initial Charge: Charge fully before first use (8-10 hours via AC).
LCD Calibration: Allow display to stabilize (shows accurate battery percentage).
Output Configuration: Select appropriate output mode via mode button.
Test Connections: Verify all output ports are functioning properly.

CAUTION! Do not exceed maximum load capacity. Check device power requirements before connecting.

Specifications

Battery Capacity: 160Wh Lithium-ion.
AC Output: 160W continuous, 300W surge.
DC Output: 12V/10A max.
USB Output: USB-A: 5V/2.4A, USB-C: 18W PD.
Solar Input: 12-24V, 60W max.
Charging Time: AC: 6-8 hours, Solar: 8-10 hours (depending on conditions).
Display: LCD with battery percentage, input/output wattage.
Weight: 3.5 lbs (1.6 kg).
Operating Temperature: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access functions via front panel buttons and LCD menu.

Front Panel: POWER button, MODE button, LED light button, LCD display.

LCD Display: Shows battery percentage (%), input power (W), output power (W), estimated runtime.

Settings: Output mode selection (AC/DC priority), LED light modes (High/Low/SOS), Battery save mode (auto-shutdown timer), Display brightness adjustment.

Connecting Devices

AC Devices: Plug into AC outlet (max 160W). DC Devices: Use 12V car adapter. USB Devices: Connect to USB-A or USB-C ports.

Check device power requirements before connecting.
Turn off power station before connecting/disconnecting devices.
Connect one device at a time to avoid overload.
Monitor LCD display for power consumption.

Tip: Start with lowest power devices first when testing multiple connections.

Charging & Power Management

Supports AC wall charging, solar charging, and car charging.

AC Charging: Use included adapter; charging indicator turns red during charge, green when full.
Solar Charging: Connect compatible solar panel; ensure direct sunlight for optimal charging.
Car Charging: Use 12V car charger adapter (sold separately).
Battery Save Mode: Enable in settings for auto-shutdown after 1/2/4 hours of inactivity.
Power Monitoring: LCD shows real-time input/output power and estimated runtime.
Low Battery Protection: Unit automatically shuts down at 10% to protect battery.

WARNING! Use only approved charging accessories. Do not charge in extreme temperatures.

Safety Features

Overload Protection: Automatic shutdown if total load exceeds 160W. Short Circuit Protection: Protects against short circuits. Temperature Control: Prevents overheating. Low Voltage Protection: Shuts down at 10% battery. Reverse Polarity Protection: For DC connections.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only; no liquids or chemicals.

CAUTION! Do not disassemble unit. Keep away from metal objects to prevent short circuits.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE certified for European market. RoHS compliant. Copyright © 2025 Kings Adventure; all rights reserved. For support, visit www.kingsadventure.com or contact 1-800-555-0123.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't power on	Battery depleted	Charge for at least 30 minutes before use.
No output power	Overload protection activated	Disconnect all devices, wait 30 seconds, restart with lower load.
Slow charging	Insufficient power source	Use proper AC adapter or ensure solar panel has adequate sunlight.
LCD display blank	Sleep mode or fault	Press any button to wake; if persists, contact support.
Device not charging	Incompatible device	Check device power requirements; try different output port.

Reset: Hold power button for 10 seconds to perform hard reset.

Service: 1-800-555-0123; www.kingsadventure.com