Kings Adventure AKSR-PN160W 02 User Manual

The Kings Adventure AKSR-PN160W 02 is a versatile portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. It features a 160Wh lithium-ion battery capacity, multiple output ports (AC, DC, USB), pure sine wave inverter technology, LCD display for monitoring, built-in MPPT solar charge controller, and various safety protections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, Pure Sine Wave AC Inverter, LCD Display Panel, Solar Charge Input, Multiple Output Ports, Carrying Handle.

Feature	Description
AC Output Ports	Pure sine wave AC outlets for sensitive electronics
DC Output Ports	12V/10A carport and 5.5mm DC outputs
USB Output Ports	USB-A and USB-C ports for mobile devices
LCD Display	Shows battery level, input/output power, and status
Solar Charge Input	MPPT controller for efficient solar panel charging
AC Charging Input	For wall outlet charging (100-240V)
Car Charging Input	12V car adapter for charging while driving
Power Button	Turns unit on/off
LED Flashlight	Built-in emergency light with multiple modes
Overload Protection	Automatic shutdown on overload or short circuit

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to wall outlet and power station.
Solar Panel Setup: Connect compatible solar panel to solar input port (optional).
Device Connection: Connect your devices to appropriate output ports.
Power On: Press and hold power button for 2 seconds to activate.

WARNING! Keep away from water and extreme temperatures. Ensure ventilation during operation.

First-Time Setup

Power on unit; monitor LCD display.

Initial Charge: Charge fully before first use (4-6 hours via AC).
Display Familiarization: Check battery percentage, input/output wattage.
Output Configuration: Select appropriate ports for your devices.
Solar Setup: Connect solar panel if using renewable charging.

CAUTION! Use only included or recommended charging accessories.

Specifications

Battery Capacity: 160Wh (44,000mAh).
Battery Type: Lithium-ion.
AC Output: 110V/60Hz, 150W continuous (300W surge).
DC Output: 12V/10A.
USB Output: USB-A: 5V/2.4A; USB-C: 18W PD.
Solar Input: 12-24V, max 60W.
AC Charging: 100-240V, 50-60Hz.
Car Charging: 12V/24V vehicle socket.
Operating Temp: 32°F to 104°F (0°C to 40°C).
Weight: 3.5 lbs (1.6 kg).

Controls and Settings

Front Panel: Power Button, LCD Display, Output Ports, Flashlight Button.

LCD Display Icons: Battery percentage, Input/Output power, Temperature warning, Overload indicator.

Power Management: Press power button to turn on/off. Hold flashlight button for 2 seconds to toggle light modes (High/Low/SOS). Output Selection: Connect devices to appropriate ports based on power requirements. Battery Saver Mode: Automatically enters sleep mode after 30 minutes of no load.

Connecting Devices

AC Devices: Plug into AC outlets (max 150W). DC Devices: Use 12V carport or DC outputs. USB Devices: Connect to USB-A or USB-C ports.

Check device power requirements before connecting.
Start with power station turned off.
Connect device cable to appropriate port.
Turn on power station, then turn on device.

Tip: For sensitive electronics, use pure sine wave AC outlets.

Charging & Power Management

Supports multiple charging methods: AC wall outlet, solar panel, car charger.

AC Charging: Connect included adapter to wall and unit (4-6 hours).
Solar Charging: Connect compatible panel (6-8 hours in full sun).
Car Charging: Use 12V car adapter while driving.
Monitoring: LCD shows charging progress and estimated time remaining.
Battery Care: For longevity, avoid complete discharge; recharge when below 20%.
Simultaneous Use: Can charge and power devices at same time.

WARNING! Do not exceed maximum input power ratings. Use only recommended solar panels.

Safety Features

Overload Protection: Automatic shutdown if load exceeds 150W. Short Circuit Protection: Cuts power on detected short. Temperature Control: Reduces output if overheating detected. Low Voltage Protection: Shuts down when battery reaches critical low level.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth only; no liquids.

CAUTION! Do not disassemble. Keep away from metal objects to prevent short circuits.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Kings Adventure; all rights reserved. For support, visit www.kingsadventure.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Connect to power source and charge for 30 minutes.
No output power	Overload protection triggered	Disconnect all devices, wait 30 seconds, reconnect one device at a time.
Slow charging	Insufficient power source	Ensure AC outlet is working; use proper solar panel in direct sunlight.
LCD display blank	Sleep mode or fault	Press power button; if no response, try resetting with paperclip in reset hole.
Device not charging	Incompatible or faulty cable	Try different cable; check device compatibility with port specifications.

Reset: Use paperclip in reset hole on side panel for 5 seconds.

Service: 1-800-555-1234; www.kingsadventure.com/support