Kelu Artu 23.8610.95 Instruction Manual

The Kelu Artu 23.8610.95 is a precision-engineered multi-function device designed for professional and home use. It features advanced calibration, multiple operational modes, intuitive controls, and robust connectivity options. This manual provides comprehensive guidance on safety, features, installation, setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.

Features at a Glance

Key components: High-resolution display, Main Control Unit, Power Module, Data Ports, Calibration Interface, and Remote Sensor.

Installation

Unpack all components carefully. Place on a stable, level surface away from direct sunlight and moisture.

1. Position the unit: Ensure adequate ventilation (minimum 10cm clearance on all sides).
2. Connect power: Use supplied power cord to connect to appropriate AC outlet.
3. Connect peripherals: Attach sensors or accessories to designated ports.
4. Secure connections: Ensure all cables are firmly seated and organized.

WARNING! Device contains sensitive electronics. Avoid shock, vibration, or extreme temperatures during installation.

First-Time Setup

Power on the device; follow initialization sequence.

1. Language selection: Choose preferred language from setup menu (default: ENGLISH).
2. Unit configuration: Select measurement units (Metric/Imperial) as required.
3. Calibration: Perform initial calibration using CALIBRATE function.
4. Network setup: Configure wireless or wired connection if applicable.
5. User profile: Create or select operational profile.

CAUTION! Complete initial calibration before first use for accurate measurements.

Specifications

• Model: Kelu Artu 23.8610.95
• Display: 5-inch color LCD with touch capability
• Measurement Range: 0-9999 units with 0.1% accuracy
• Operating Modes: Standard, High Precision, Economy, Diagnostic
• Connectivity: USB-C, Wi-Fi (802.11ac), Bluetooth 5.0
• Power Requirements: 100-240V AC, 50/60Hz, 45W max
• Operating Temperature: 5°C to 40°C (41°F to 104°F)
• Storage Temperature: -20°C to 60°C (-4°F to 140°F)
• Dimensions: 250 x 180 x 85 mm (9.8 x 7.1 x 3.3 inches)
• Weight: 1.8 kg (4.0 lbs)

Controls and Settings

Access main menu via front panel or remote control. Front Panel: POWER/STANDBY, MODE SELECT, CALIBRATE, DATA HOLD.

Remote Control: POWER, Navigation arrows, ENTER, MENU, MODE, CAL, HOLD, BACKLIGHT, SETTINGS.

Display Settings: Brightness, Contrast, Auto-dim, Screen timeout. Measurement Settings: Units, Sampling rate, Averaging, Alarm thresholds. System Settings: Language, Time/Date, Network, Factory reset. Calibration Settings: Zero adjustment, Span calibration, Sensor compensation.

Connecting Devices

Data Port: USB-C for computer connection. Auxiliary Ports: For external sensors and accessories. Network: Ethernet or Wi-Fi for remote monitoring.

1. Ensure device is powered off before making connections.
2. Use only Kelu Artu certified cables and accessories.
3. Connect USB-C cable for data transfer or charging.
4. Attach sensors to appropriate auxiliary ports.
5. Power on device and verify connections in status menu.

Tip: Label cables for easy identification and troubleshooting.

Operating Modes

Supports four primary operational modes for different applications.

1. Standard Mode: Default setting for general use with balanced performance.
2. High Precision Mode: Maximum accuracy with reduced sampling speed.
3. Economy Mode: Power-saving operation with basic functionality.
4. Diagnostic Mode: For system testing and troubleshooting.
5. Mode Selection: Press MODE button to cycle through available modes.
6. Data Recording: Press HOLD to freeze display; use RECORD to log data.
7. Custom Profiles: Save frequently used settings as user profiles.
8. Auto-calibration: Device can be scheduled for periodic auto-calibration.

WARNING! Do not switch modes during critical measurements. Allow stabilization after mode changes.

Calibration & Maintenance

Regular calibration ensures measurement accuracy. Perform monthly or as needed.

1. Access Calibration menu from main settings.
2. Select calibration type (Zero, Span, or Full).
3. Follow on-screen instructions precisely.
4. Use certified reference standards for calibration.
5. Document calibration dates and results.
6. Update firmware regularly for optimal performance.

Note: Calibration requires stable environmental conditions (temperature ±2°C during procedure).

Care & Cleaning

Disconnect power before cleaning. Use only approved cleaning materials.

1. Exterior: Wipe with soft, slightly damp cloth. Do not use solvents.
2. Display: Use microfiber cloth with approved screen cleaner if needed.
3. Connectors: Keep free of dust and debris; use compressed air if necessary.
4. Vents: Ensure ventilation openings remain unobstructed.

CAUTION! Never immerse device in liquid. Avoid abrasive cleaners that may damage surfaces.

Regulatory Information

FCC Compliance: Part 15 Class A digital device. CE Marked: Complies with European directives. RoHS Compliant: Contains no hazardous substances above permitted levels. Manufactured under ISO 9001 quality standards. Copyright © 2025 Kelu Technologies. All rights reserved. For technical support, visit www.kelutech.com/support or contact +1-800-555-ARTU (2788).

Troubleshooting

Factory Reset: Settings > System > Factory Reset (Note: This erases all user settings).

Service: Contact authorized Kelu Artu service center. Do not attempt internal repairs.