Immax 08500L User Manual

The Immax 08500L is a versatile LED lighting solution designed for both residential and commercial use. It features energy-efficient LED technology, multiple color temperature settings, dimmable functionality, and a robust build for long-lasting performance. This manual covers safety instructions, product features, installation steps, operation guidelines, maintenance, and troubleshooting to ensure optimal use of your Immax 08500L lighting fixture.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operation Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: High-efficiency LED panel, remote control (if applicable), mounting bracket, power adapter, and user manual.

Feature	Description
LED Technology	Energy-saving, long-life LED light source
Color Temperature	Adjustable (e.g., 3000K Warm White to 6500K Cool White)
Dimmable	Compatible with standard dimmer switches (check compatibility)
Brightness	High lumen output with low power consumption
Mounting Options	Ceiling, wall, or suspended mounting
Beam Angle	Wide beam for even illumination
Remote Control	Wireless control for settings (if included)
IP Rating	Dust and moisture resistance (e.g., IP44)
Power Input	AC 100-240V, 50/60Hz
Warranty	Limited warranty as per regional regulations

Installation

Unpack and inspect all components. Ensure the power is turned off at the circuit breaker before installation.

Choose Mounting Location: Select a stable, flat surface suitable for the fixture's weight and size.
Install Mounting Bracket: Secure the bracket to the ceiling or wall using appropriate screws and anchors.
Connect Wires: Follow wiring diagram to connect live (brown), neutral (blue), and ground (green/yellow) wires.
Attach Fixture: Align the fixture with the bracket and secure it according to instructions.
Restore Power: Turn the power back on at the circuit breaker.

WARNING! Installation should be performed by a qualified electrician. Ensure all connections are secure and insulated.

First-Time Setup

After installation, configure the light settings to suit your preference.

Power On: Switch on the light using the wall switch or remote.
Select Color Temperature: Use the remote or integrated switch to cycle through warm, neutral, and cool white settings.
Adjust Brightness: If dimmable, adjust using a compatible dimmer or remote control.
Set Timer/Sensor: If equipped with motion or light sensor, adjust sensitivity and duration as needed.

CAUTION! Do not exceed the maximum wattage rating if connecting multiple fixtures. Avoid touching LED surface during operation.

Specifications

Model: Immax 08500L
Power Consumption: 20W (equivalent to 150W incandescent)
Luminous Flux: 2000 lumens
Color Temperature: 3000K-6500K adjustable
Color Rendering Index (CRI): >80
Dimmable: Yes (with compatible dimmer)
Input Voltage: AC 100-240V, 50/60Hz
Power Factor: >0.9
Lifespan: 25,000 hours
Operating Temperature: -20°C to 40°C
Dimensions: 300mm x 300mm x 15mm (approx.)
Weight: 1.2 kg

Controls and Settings

Control via wall switch, remote (if included), or smart home system (if compatible).

Remote Functions: ON/OFF, Brightness Up/Down, Color Temperature Cycle, Timer Set, Reset.

Manual Controls: Integrated switch for basic on/off and mode selection. Settings: Adjust brightness level, color temperature, and timer duration via remote or app. Reset: Hold down power button for 10 seconds to restore factory settings.

Connecting to Power

Ensure proper electrical connection for safe operation.

Turn off power at the main circuit breaker.
Connect wires: Match fixture wires to household wiring (live to live, neutral to neutral, ground to ground).
Secure connections with wire nuts and insulate properly.
Mount fixture and restore power.

Tip: Use a voltage tester to confirm power is off before starting work.

Operation Modes

The Immax 08500L offers multiple operation modes for convenience.

Standard Mode: Full brightness at selected color temperature.
Dimmable Mode: Adjust brightness smoothly with compatible dimmer.
Night Mode: Reduced brightness for ambient lighting.
Timer Mode: Automatically turns off after set duration (if supported).
Sensor Mode: Motion or daylight sensor activates light automatically (if equipped).

WARNING! Do not operate in enclosed fixtures unless rated for such use. Ensure adequate ventilation.

Maintenance

Regular maintenance ensures optimal performance and longevity.

Cleaning: Turn off power and allow fixture to cool. Wipe with a dry, soft cloth. Do not use abrasive cleaners or liquids. Inspection: Periodically check for loose connections or signs of damage. Replacement: LED modules are not user-replaceable; contact service for issues.

CAUTION! Never disassemble the fixture while powered. Avoid exposure to water unless IP-rated for wet locations.

Regulatory Information

CE Certified: Complies with European safety standards. RoHS Compliant: Free of hazardous substances. FCC Part 15: Class B digital device; complies with interference limits. Warranty: 3-year limited warranty from date of purchase. For support, visit www.immaxlighting.com or contact customer service at +31 (0)20 654 3210.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power supply issue	Check circuit breaker; ensure switch is on; verify wiring connections.
Flickering light	Incompatible dimmer or loose connection	Use compatible dimmer; tighten connections; check for voltage fluctuations.
Dim output	Dimmer setting or aging LED	Adjust dimmer to full brightness; if persistent, contact service.
Remote not working	Batteries or obstacles	Replace remote batteries; ensure clear line of sight to sensor.
Unusual noise	Transformer or driver issue	Turn off and contact customer service for inspection.

Reset: Turn off for 30 seconds, then turn on to reset internal circuitry.

Service: +31 (0)20 654 3210; www.immaxlighting.com