Horizon Fitness 20' ecoSAVER Installation-Operation Manual

The Horizon Fitness 20' ecoSAVER is a 20-inch energy-efficient LCD display designed for fitness equipment consoles, featuring an eco-friendly power-saving mode, VGA input for equipment interface, adjustable brightness, and a durable, low-glare screen suitable for gym environments. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Fitness Equipment 7. Operation Modes 8. Power Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 20-inch LCD panel with ecoSAVER technology, VGA INPUT port, Power connector, Mounting brackets, Adjustment controls.

Feature	Description
VGA INPUT port	For connection to fitness equipment console or PC
Power connector	For AC power input
Mounting brackets	For secure attachment to equipment
Brightness control	Manual adjustment for ambient light conditions
ecoSAVER mode	Automatically reduces power consumption during inactivity
Power button	Turns display on/off
Menu button	Accesses OSD settings
Input select	Switches between connected sources
Auto-adjust	Optimizes display settings for connected source
Low-glare screen	Reduces reflections in bright environments

Installation

Unpack and inspect contents. Ensure all parts are present.

Mount display: Use provided brackets to attach to fitness equipment console.
Connect VGA cable: Attach from equipment console to VGA INPUT port.
Connect power: Plug power cord into display and wall outlet.
Secure cables: Use cable ties to prevent loose connections.

WARNING! Display is fragile; handle with care. Ensure mounting surface is stable and can support weight.

First-Time Setup

Power on display; follow on-screen prompts if available.

Adjust position: Tilt display for optimal viewing angle.
Set input source: Press INPUT to select VGA.
Adjust display settings: Use MENU to set brightness, contrast, etc.
Enable ecoSAVER: In POWER menu, set ecoSAVER to ON.

CAUTION! Do not overtighten mounting screws. Ensure cables are not pinched.

Specifications

Screen Size: 20 inches LCD.
Resolution: 1600 x 900 recommended.
Power Consumption: 25W typical, 15W in ecoSAVER mode.
Inputs: VGA.
Power Source: 100-240V AC, 50/60Hz.
Operating Temp: 0°C to 40°C.
Mounting: VESA 100x100 compatible.
Screen Coating: Anti-glare, matte finish.

Controls and Settings

Access OSD via MENU button. Front Panel: POWER, MENU, INPUT, AUTO, +/- buttons.

OSD Menu: Brightness, Contrast, Color Temperature, Input Select, ecoSAVER, Reset.

Brightness: Adjust for ambient light. Contrast: Set for optimal image clarity. Color Temperature: Cool, Normal, Warm. Input Select: VGA. ecoSAVER: On/Off, timer settings. Reset: Restore factory defaults.

Connecting to Fitness Equipment

VGA: Primary input for equipment console.

Turn off display and equipment before connecting.
Connect VGA cable from equipment to display.
Secure with thumb screws.
Power on equipment, then display.
Select VGA input via INPUT button.

Tip: Use high-quality VGA cable to ensure clear signal.

Operation Modes

Normal mode: Full brightness and operation. ecoSAVER mode: Reduced power after inactivity.

Normal: Display operates at full settings.
ecoSAVER: Activated after set period of no signal or input.
Sleep: Display turns off after extended inactivity.
Wake: Automatically wakes upon signal detection.

WARNING! Do not block ventilation openings during operation.

Power Management

ecoSAVER settings: Adjust in OSD menu (5, 10, 15, 30 minutes). Sleep timer: 30, 60, 120 minutes.

Care & Cleaning

Unplug before cleaning. Use dry, soft cloth; lightly dampen with water if needed.

CAUTION! Do not use alcohol, ammonia, or abrasive cleaners. Avoid spraying directly on screen.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Horizon Fitness; trademarks of Horizon Fitness, Inc. For support, visit www.horizonfitness.com or contact 1-800-244-4192.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Power/connections	Ensure power cord connected; press POWER; check VGA cable.
Blurry image	Resolution/settings	Adjust equipment output to 1600x900; press AUTO button.
Display turns off	ecoSAVER mode	Adjust ecoSAVER timer; ensure signal is present.
No input detected	Cable/input select	Check VGA connection; press INPUT to select VGA.
Unresponsive buttons	Locked controls	Hold MENU for 10 seconds to unlock.

Reset: Menu > System > Reset to factory defaults.

Service: 1-800-244-4192; www.horizonfitness.com