Gosun SOLAR 10 User Manual

The Gosun SOLAR 10 is a portable solar-powered device designed for outdoor use, featuring a high-efficiency solar panel, integrated battery storage, multiple USB output ports, waterproof construction, LED status indicators, and foldable design for easy transport. It is ideal for charging smartphones, tablets, cameras, and other USB-powered devices in remote locations. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency monocrystalline solar panel, Lithium-ion battery pack, USB output ports, LED power indicator, waterproof casing, foldable legs, and carrying handle.

Feature	Description
Solar Panel	Monocrystalline, 10W output for efficient energy conversion
Battery Capacity	Integrated 10,000mAh lithium-ion battery
USB Output Ports	Two USB-A ports (5V/2.4A each) for device charging
LED Indicator	Shows charging status and battery level
Waterproof Rating	IPX4 splash-resistant design
Foldable Design	Legs and panel fold for compact storage
Carrying Handle	Integrated handle for easy transport
Input Port	Micro-USB for alternative wall charging
Weight	1.2 lbs (0.54 kg) lightweight construction
Operating Temperature	14°F to 122°F (-10°C to 50°C)

Installation

Unpack and inspect contents. Ensure all components are present and undamaged.

Unfold the solar panel: Release latches and extend panel fully.
Adjust legs: Extend foldable legs to desired angle for optimal sun exposure.
Position device: Place on stable, flat surface facing direct sunlight.
Connect devices: Use included USB cables to connect devices to output ports.

WARNING! Do not expose to extreme temperatures or submerge in water. Keep away from children and pets.

First-Time Setup

Before first use, fully charge the battery via solar or wall adapter.

Initial charge: Place in direct sunlight for 6-8 hours or use wall charger via micro-USB.
Check LED indicator: Solid green light indicates full charge.
Connect device: Plug your device into USB port using appropriate cable.
Monitor charging: LED will blink during charging; solid when complete.

CAUTION! Ensure solar panel is clean and free of obstructions for optimal performance.

Specifications

Model: Gosun SOLAR 10.
Solar Panel: 10W monocrystalline.
Battery: 10,000mAh lithium-ion.
Output: 5V/2.4A per port, 12W total.
Input: Solar 10W max; micro-USB 5V/2A.
Charging Time: Solar: 6-8 hours (full sun); Wall: 5-6 hours.
Device Compatibility: Smartphones, tablets, cameras, GPS, Bluetooth speakers.
Dimensions: 9.8 x 6.3 x 1.2 inches (folded); 19.7 x 13.8 inches (unfolded).
Weight: 1.2 lbs (0.54 kg).
Warranty: 1-year limited warranty.

Controls and Settings

Simple operation with minimal controls. LED Indicator: Green (full charge), Blinking green (charging), Red (low battery).

Power Button: Press once to turn on/off output; hold for 3 seconds to reset.

Charging Modes: Solar charging (automatic when exposed to sun); Wall charging via micro-USB.

Battery Protection: Overcharge, over-discharge, short-circuit, and temperature protection.

Connecting Devices

Compatible with most USB-powered devices. Use provided or certified USB cables.

Ensure SOLAR 10 is charged (green LED).
Connect device cable to USB output port.
Device should begin charging automatically.
Monitor LED: Blinking during charge, solid when device is fully charged.

Tip: For fastest charging, use one port at a time. Avoid using in shaded areas.

Charging & Power Management

Optimize charging efficiency with proper solar positioning.

Solar charging: Position panel at 90-degree angle to sun; adjust every 2-3 hours.
Wall charging: Connect micro-USB to 5V/2A wall adapter (not included).
Battery status: LED indicates charge level (4 lights = 100%, 1 light = 25%).
Auto-shutoff: Stops charging when device battery is full to prevent overcharging.
Dual charging: Charge SOLAR 10 battery while charging devices simultaneously.

WARNING! Do not attempt to disassemble or modify battery. Use only provided or certified cables.

Safety Features

Built-in protections: Overcharge, over-discharge, short-circuit, over-temperature, and reverse polarity protection. Water-resistant design (IPX4) protects against splashes.

Care & Cleaning

Store in cool, dry place when not in use. Clean solar panel with soft, dry cloth only.

CAUTION! Do not use chemicals, abrasives, or water sprays. Avoid extreme temperatures and direct impact.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Battery depleted	Charge via solar or wall adapter for 2+ hours.
Slow charging	Insufficient sunlight	Reposition to direct sun; clean solar panel.
LED not lighting	Device not connected	Ensure device is properly connected and turned on.
Overheating	High ambient temperature	Move to shaded area; allow to cool before use.
Device not charging	Faulty cable/port	Try different USB cable; test other port.

Reset: Hold power button for 10 seconds to reset system.

Service: 1-800-555-1234; www.gosun.com