Gama Sonic GS-94C-D Instruction Manual

The Gama Sonic GS-94C-D is a solar-powered outdoor post lantern featuring a durable metal construction, automatic dusk-to-dawn operation powered by a high-efficiency polycrystalline solar panel and rechargeable battery, warm white LED illumination, weather-resistant design, and easy installation with included mounting hardware. Below are key sections for safety, features, installation, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Components 7. Operation 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Solar Panel, LED Light Module, Rechargeable Battery, Photocell Sensor, Metal Housing, Mounting Bracket.

FeatureDescription
Solar PanelHigh-efficiency polycrystalline panel for charging battery
LED Light ModuleEnergy-efficient warm white LEDs for illumination
Rechargeable BatterySealed lead-acid or lithium battery for night operation
Photocell SensorAutomatically turns light on at dusk and off at dawn
Metal HousingDurable, weather-resistant construction
Mounting BracketFor secure installation on post or wall
ON/OFF SwitchManual override control (if equipped)
Charge IndicatorLED indicator showing charging status
Waterproof DesignIP65 rated for outdoor use
Automatic OperationNo wiring required; operates independently

Installation

Unpack and inspect contents. Choose optimal location.

  1. Select location: Ensure solar panel receives direct sunlight for 6-8 hours daily.
  2. Assemble components: Attach solar panel to light housing as per instructions.
  3. Mount on post: Use included bracket and hardware to secure to 2-4 inch diameter post.
  4. Secure all connections: Ensure weatherproof seals are properly engaged.

WARNING! Do not install near other light sources that may interfere with photocell. Ensure mounting surface is stable.

First-Time Setup

Initial charging before first use is critical.

  1. Initial charge: Expose solar panel to direct sunlight for 2 full days before turning on.
  2. Test operation: Cover photocell to simulate darkness; light should turn on automatically.
  3. Adjust angle: Position solar panel to face true south (northern hemisphere) for maximum exposure.
  4. Verify operation: Light should operate from dusk to dawn automatically.

CAUTION! Do not turn on before initial charging is complete. Keep battery compartment dry.

Specifications

Controls and Settings

Fully automatic operation with optional manual override.

Automatic Mode: Photocell sensor detects ambient light levels - turns on at dusk, off at dawn.

Manual Switch (if equipped): ON position overrides automatic operation for continuous light. OFF position allows automatic operation.

Battery Protection: Built-in low-voltage disconnect prevents battery over-discharge.

No additional settings required: Factory preset for optimal performance.

Connecting Components

Pre-assembled unit requires no electrical connections.

  1. Internal wiring: All components pre-connected at factory.
  2. Weatherproof seals: Ensure all gaskets and seals are properly positioned during assembly.
  3. Battery connection: Battery comes pre-installed; ensure terminals are secure if replacement needed.
  4. Solar panel connection: Wired directly to charge controller and battery.

Tip: Check all factory connections during assembly to ensure proper contact.

Operation

Automatic dusk-to-dawn operation.

  1. Daily cycle: Solar panel charges battery during daylight hours.
  2. Automatic activation: Photocell turns light on when ambient light drops below threshold.
  3. Night operation: LED operates at full brightness using stored battery power.
  4. Automatic shutoff: Light turns off at dawn or when ambient light reaches sufficient level.
  5. Low light conditions: During cloudy days, operation time may be reduced.
  6. Manual override: Use switch (if equipped) for continuous operation when needed.

WARNING! Do not cover solar panel during daylight hours. Keep photocell sensor clean and unobstructed.

Maintenance & Cleaning

Regular maintenance ensures optimal performance.

  1. Clean solar panel: Wipe with soft, damp cloth every 2-4 weeks to remove dust and debris.
  2. Clean light lens: Use mild soap solution and soft cloth to maintain light output.
  3. Check mounting: Ensure all hardware remains tight and secure.
  4. Battery replacement: Typically every 2-3 years; use only manufacturer recommended battery type.
  5. Winter care: Remove snow accumulation from solar panel promptly.

CAUTION! Do not use abrasive cleaners or high-pressure water on solar panel. Disconnect battery before performing any maintenance.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. CE certified for European market. RoHS compliant. Copyright © 2025 Gama Sonic; all rights reserved. For support, visit www.gamasonic.com or contact customer service at 1-800-880-1180.

Troubleshooting

SymptomPossible CauseCorrective Action
Light does not turn on at nightInsufficient chargeEnsure solar panel gets 6-8 hours direct sunlight; clean panel surface.
Light stays on during dayPhotocell obstruction or failureClean photocell sensor; ensure not covered or shaded.
Dim light outputBattery aging or dirty lensClean light lens; consider battery replacement if over 2 years old.
Short operation timePoor charging conditionsRelocate to area with more direct sunlight; check for shading.
No light at allBattery disconnected or deadCheck battery connections; replace battery if necessary.
Light flickersLoose connection or failing LEDCheck all internal connections; contact support if LED failing.

Reset: Fully charge for 48 hours to reset battery management system.

Service: 1-800-880-1180; www.gamasonic.com

Gama Sonic GS-94C-D Instruction Manual © - All Rights Reserved 2025