Furrion FSFP18WM-BL User Manual

The Furrion FSFP18WM-BL is an 18-inch stainless steel under-counter ice maker with a modern black finish, producing up to 40 lbs of ice per day. It features a sleek design with a digital control panel, built-in air filter, self-cleaning function, and energy-saving mode. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Water Supply 7. Operation Modes 8. Cleaning & Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Stainless steel housing, digital control panel, ice basket, air filter, water inlet valve, drain hose connection.

Feature	Description
Ice Production	Up to 40 lbs per day
Storage Capacity	2.2 lbs in basket
Digital Control Panel	Touch controls with LED display
Ice Size Selection	Small, Medium, Large cube options
Self-Cleaning Function	Automated cleaning cycle
Air Filter	Built-in filter for clean ice production
Energy Saving Mode	Reduces power consumption during low use
Water Filter Indicator	Alerts when filter needs replacement
Child Lock	Prevents accidental setting changes
Drain Connection	For easy water drainage during cleaning

Installation

Unpack and inspect contents. Ensure proper clearance for ventilation.

Choose location: Under counter with minimum 2-inch clearance on sides and back.
Level the unit: Adjust leveling feet for stable operation.
Connect water supply: Attach 1/4" water line to inlet valve at rear.
Connect drain hose: Attach to drain outlet for self-cleaning cycle.
Plug into dedicated 115V AC outlet.

WARNING! Unit is heavy; use two people for installation. Ensure water connections are tight to prevent leaks.

First-Time Setup

Power on unit; follow initial setup procedure.

Flush water system: Run water through unit for 5 minutes before first ice production.
Select ice size: Press ICE SIZE button to choose preferred cube size.
Set to ice making mode: Press POWER button, then select ICE mode.
Enable child lock: Press and hold LOCK button for 3 seconds if desired.
Check air filter: Ensure filter is properly installed for optimal performance.

CAUTION! Allow 24 hours for initial ice production cycle to complete. Do not consume first batch of ice.

Specifications

Model: FSFP18WM-BL
Color: Black stainless steel
Dimensions: 18" W x 17.5" D x 34.25" H
Ice Production: 40 lbs per day maximum
Storage Capacity: 2.2 lbs
Water Supply: 1/4" water line, 20-120 psi
Power Requirements: 115V AC, 60Hz, 2.5A
Refrigerant: R600a
Operating Temperature: 50°F to 100°F ambient
Certifications: NSF/ANSI 12, Energy Star certified

Controls and Settings

Digital control panel located on front of unit.

Buttons: POWER, ICE SIZE, CLEAN, LOCK, ENERGY SAVER, FILTER RESET.

Display Indicators: Power On, Ice Making, Ice Full, Clean Cycle, Water Filter Alert, Child Lock Active.

Settings: Ice Size (Small/Medium/Large), Energy Saver Mode (On/Off), Clean Cycle (Initiate/Stop), Child Lock (Enable/Disable), Filter Reset (After replacement).

Connecting Water Supply

Required: 1/4" copper or plastic water line, shut-off valve.

Turn off main water supply before connecting.
Install shut-off valve in water line.
Connect water line to unit's inlet valve (marked "IN").
Turn on water supply and check for leaks.
Run water through system for 5 minutes to flush.

Tip: Use included water filter for better ice quality and to prevent scale buildup.

Operation Modes

Multiple operating modes for different needs.

Ice Making Mode: Normal operation producing ice continuously.
Energy Saver Mode: Reduces ice production during low demand periods.
Clean Mode: Automated cleaning cycle (run every 6 months).
Standby Mode: Unit stops ice production when basket is full.
Diagnostic Mode: For service technicians (accessed by specific button sequence).

WARNING! Do not operate without proper water supply. Ensure drain hose is properly connected during clean cycle.

Cleaning & Maintenance

Regular maintenance ensures optimal performance and ice quality.

Monthly: Clean exterior with mild detergent and soft cloth.
Every 6 months: Run self-cleaning cycle (press CLEAN button for 3 seconds).
Every 6 months: Replace water filter (indicator light will illuminate).
Annually: Clean condenser coils with soft brush.
As needed: Empty and clean ice basket with warm water.

CAUTION! Unplug unit before cleaning. Never use abrasive cleaners or sharp objects.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL Listed for safety. NSF/ANSI 12 certified for commercial food equipment. Energy Star certified for energy efficiency. Copyright © 2023 Furrion; all rights reserved. For support, visit www.furrion.com or contact 1-800-789-3341.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No ice production	Water supply/unit off	Check water supply is on; ensure unit is plugged in and powered on.
Ice cubes too small	Water pressure low	Check water pressure (minimum 20 psi); clean water filter.
Unit noisy	Uneven surface/fan obstruction	Level the unit; check for obstructions near fan.
Water leakage	Loose connections	Tighten all water connections; check drain hose.
Ice tastes unusual	Old water filter	Replace water filter; flush water system.
Display not working	Power issue	Check power outlet; ensure unit is properly plugged in.

Reset: Unplug for 5 minutes, then restart.

Service: 1-800-789-3341; www.furrion.com