Furrion FSFP16MW-BL User Manual

The Furrion FSFP16MW-BL is a 16-inch portable refrigerator/freezer designed for marine, RV, and off-grid applications. It features a dual-zone cooling system, low voltage protection, battery monitoring, multiple power inputs (12/24V DC, 110-240V AC), digital temperature control, LED interior lighting, and a durable stainless steel front. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power Sources 7. Operating Modes 8. Maintenance & Cleaning 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: Dual-zone stainless steel compartment, digital control panel, power input ports, interior LED light, removable shelves, drain plug.

Feature	Description
Dual-Zone Cooling	Independent temperature control for refrigerator and freezer sections
Digital Control Panel	LCD display with temperature settings and mode selection
Multiple Power Inputs	12/24V DC and 110-240V AC compatibility
Low Voltage Protection	Automatic shutdown to prevent battery drain
Battery Monitor	Displays battery voltage and status
LED Interior Lighting	Energy-efficient interior illumination
Removable Shelves	Adjustable and easy to clean
Drain Plug	For easy defrosting and cleaning
Door Lock	Secure latch for travel and marine use
Portable Design	Built-in handles for easy transport

Installation

Unpack and inspect contents. Choose stable, level location with adequate ventilation.

Position unit: Ensure at least 4 inches clearance on all sides for proper airflow.
Secure mounting: Use provided brackets for marine or RV installation.
Connect power: Choose appropriate power source (DC or AC).
Check ventilation: Ensure air vents are unobstructed.

WARNING! Do not install near heat sources or in direct sunlight. Ensure proper ventilation to prevent overheating.

First-Time Setup

Power on unit; allow 24 hours for temperature stabilization.

Initial cooling: Set to maximum cooling for first 4-6 hours.
Temperature setting: Use control panel to set desired temperatures.
Mode selection: Choose between REFRIGERATOR, FREEZER, or DUAL modes.
Battery monitoring: Check battery voltage display for proper power supply.

CAUTION! Do not overload unit. Allow space between items for proper air circulation.

Specifications

Capacity: 16 liters (0.57 cubic feet)
Temperature Range: -4°F to 50°F (-20°C to 10°C)
Power Consumption: 45W average, 0.8A @ 12V DC
Power Input: 12/24V DC, 110-240V AC 50/60Hz
Refrigerant: R134a eco-friendly
Dimensions: 15.7" W × 13.8" D × 14.2" H (40 × 35 × 36 cm)
Weight: 22 lbs (10 kg)
Certifications: CE, RoHS, ETL marine certified
Warranty: 1-year limited warranty

Controls and Settings

Digital control panel with LCD display and membrane buttons.

Control Panel: POWER, MODE, TEMP UP, TEMP DOWN, LIGHT, SET

Temperature Settings: Independent control for each zone in dual mode. Display Modes: Current temperature, set temperature, battery voltage, error codes. Power Modes: DC priority (automatically switches to AC if DC voltage low). Battery Protection: Three-level low voltage cutoff (10.4V, 11.1V, 11.8V adjustable).

Connecting Power Sources

Multiple power input options for flexible installation.

DC Connection: Use 12/24V DC input for vehicle or battery power.
AC Connection: Use included AC adapter for shore power.
Dual Power: Unit automatically switches between available power sources.
Fuse Protection: 10A fuse in DC power line (user replaceable).

Tip: Use appropriate gauge wire for DC connections to prevent voltage drop.

Operating Modes

Three operating modes for different cooling needs.

Refrigerator Mode: Cools single compartment to refrigerator temperatures.
Freezer Mode: Cools single compartment to freezer temperatures.
Dual Mode: Maintains different temperatures in two separate zones.
Eco Mode: Energy-saving operation with reduced power consumption.
Fast Cool: Rapid cooling for quick temperature reduction.
Vacation Mode: Maintains safe temperature with minimal power use.

WARNING! Do not block air vents inside unit. Ensure proper air circulation for efficient cooling.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

Defrosting: Turn off unit, remove contents, open drain plug.
Cleaning: Use mild detergent and warm water. Never use abrasive cleaners.
Seal inspection: Check door gasket regularly for proper seal.
Condenser cleaning: Vacuum condenser fins every 3 months.

CAUTION! Unplug unit before cleaning. Never use sharp objects to remove ice.

Regulatory Information

FCC Part 15: Class B digital device compliant. CE certified for European markets. RoHS compliant (Restriction of Hazardous Substances). ETL certified for marine use. Manufactured to ISO 9001 standards. For support, visit www.furrion.com or contact 1-800-789-3747. Copyright © 2023 Furrion Ltd. All rights reserved.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not cooling	Power supply/ventilation	Check power connections; ensure proper ventilation; verify fuse.
Display shows error code	Sensor/voltage issue	Refer to error code chart in manual; check battery voltage.
Excessive frost buildup	Door seal/temperature	Check door seal; avoid frequent door opening; defrost unit.
Battery drain	Low voltage cutoff setting	Adjust low voltage protection setting; check battery health.
Unusual noise	Vibration/component	Ensure unit is level; check for loose components; clean condenser.

Reset: Hold SET button for 5 seconds to reset to factory defaults.

Service: 1-800-789-3747; www.furrion.com/support