Furrion C-FSFP37MW-A03 Installation Manual

The Furrion C-FSFP37MW-A03 is a 37-inch Full HD LED TV designed for marine and recreational vehicle (RV) use, featuring a slim profile, anti-glare screen, built-in digital tuner, multiple HDMI inputs, USB media playback, VGA input, AV composite input, headphone jack, remote control, wall mount compatibility (VESA 200x200), and low power consumption. Powered by 12V DC/24V DC. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Playing USB Media 8. Accessibility Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Full HD LED anti-glare panel, Remote Control, Antenna connector, HDMI inputs, USB port, VGA INPUT, Headphone jack, AV IN jacks.

Feature	Description
Antenna connector	For external antenna or cable/satellite input (75 Ohm)
HDMI INPUT ports	For digital audio/video connection (HDMI 1, HDMI 2)
USB port	For media playback (photos, music, videos)
VGA INPUT (PC input) port	For computer video connection
VGA AUDIO IN jack	For PC audio input
Headphone jack	For private audio listening (3.5mm)
DC input connector	For 12V/24V DC power connection
AV IN jacks	Composite video (yellow) and L/R audio (white/red) inputs
POWER	Turns TV on/off
MENU	Access on-screen menu
SOURCE	Cycles through input sources

Installation

Unpack and inspect contents. Ensure mounting surface is stable and can support weight.

Wall Mounting (Optional): Use VESA 200x200 compatible wall mount. Attach bracket to TV rear using provided screws. Secure to wall studs.
Connect antenna or cable: Attach coaxial cable to ANTENNA IN connector on rear.
Connect video sources: Use HDMI for high-definition devices; use AV IN for composite video.
Connect PC: Use VGA port and corresponding audio jack.
Connect power: Plug DC power cord into DC IN port and connect to 12V/24V DC power source.

WARNING! TV is heavy; use two people for lifting and mounting. Ensure all connections are secure and power source matches required voltage.

First-Time Setup

Power on TV using front button or remote; follow on-screen prompts.

Select Language: Use MENU > SETTINGS > LANGUAGE to select preferred language.
Auto-tune channels: Press MENU > CHANNEL > AUTO SEARCH to scan for available channels.
Adjust picture settings: Use MENU > PICTURE to set Mode (Standard, Vivid, Movie, User), Brightness, Contrast, etc.
Adjust sound settings: Use MENU > SOUND to set Mode (Standard, Music, Movie, Speech), Balance, etc.
Set sleep timer: Use MENU > SYSTEM > SLEEP TIMER to set auto power-off.

CAUTION! Ensure stable power supply; avoid voltage spikes. Use in well-ventilated area.

Specifications

Screen Size: 37 inches LED.
Resolution: Full HD 1920 x 1080.
TV System: ATSC, NTSC, QAM.
Sound: Built-in stereo speakers (2 x 10W), adjustable sound modes.
Terminals: Antenna (F-type), HDMI x2, USB, VGA input, headphone, AV IN (composite video/L/R audio).
Media Playback: Supports USB playback of JPEG, MP3, MPEG, AVI, MKV.
Power Source: 12V DC / 24V DC.
Power Consumption: ≤ 45W.
Operating Temp: 0°C to 40°C (32°F to 104°F).
VESA Mount: 200mm x 200mm.

Controls and Settings

Access OSD via MENU button on remote or side panel. Front/Side Panel: POWER, MENU, VOLUME (+/-), SOURCE.

Remote: POWER, Numeric buttons, SOURCE, MENU, VOLUME, MUTE, CHANNEL, EXIT, INFO, USB MEDIA shortcut.

Picture Settings: Picture Mode, Brightness, Contrast, Color, Tint, Sharpness, Backlight, Color Temperature. Sound Settings: Sound Mode, Balance, Bass, Treble. Channel Settings: Auto Search, Manual Tuning, Channel Skip/Delete. System Settings: Language, Sleep Timer, Parental Lock (default password 0000), Reset.

Connecting Devices

Antenna: Rear F-connector. HDMI: For Blu-ray, streaming devices, gaming consoles. AV: Composite video/audio. PC: VGA + audio. USB: For media playback.

Turn off TV and external device before connecting.
Match cables to correct ports (e.g., HDMI to HDMI, yellow/white/red to AV IN).
Select input source via SOURCE button or remote (TV, HDMI1, HDMI2, AV, VGA, USB).
Power on devices.

Tip: For best picture quality, use HDMI connections. Ensure cables are fully inserted.

Playing USB Media

Supports JPEG, MP3, MPEG, AVI, MKV formats from USB drive.

Insert USB drive into USB port on side or rear of TV.
Press SOURCE and select "USB", or press USB shortcut on remote.
Navigate files using arrow buttons; press OK to select and play.
During playback, use remote for PLAY/PAUSE, STOP, PREV/NEXT, FAST FORWARD/REWIND.
For photos: Use slideshow mode; zoom with ZOOM button if available.
For music: Shuffle and repeat modes available in options.

WARNING! Safely eject USB drive via on-screen option before removal. Do not remove during playback.

Accessibility Features

Closed Captions: Enable via MENU > SYSTEM > CLOSED CAPTION (CC1, CC2, etc.). Parental Controls: Set rating limits via MENU > SYSTEM > PARENTAL LOCK (default password 0000).

Care & Cleaning

Disconnect from power before cleaning. Use soft, dry microfiber cloth to wipe screen and cabinet. For stubborn marks, lightly dampen cloth with water only; do not apply directly to screen.

CAUTION! Do not use chemical cleaners, solvents, or abrasive materials. Avoid pressure on screen.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for a Class B digital device. Copyright © Furrion Ltd. All rights reserved. For support, visit www.furrion.com or contact customer service at 1-855-387-7466.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power connection/voltage	Check DC power cord connection; verify power source is 12V/24V DC.
No picture, sound OK	Input source/brightness	Press SOURCE to correct input; adjust picture brightness/backlight.
No signal on HDMI	Cable/device power	Ensure HDMI cable is firmly connected; power on source device.
USB not recognized	Format/compatibility	Reformat USB drive to FAT32; ensure files are in supported formats.
Remote not working	Batteries/obstructions	Replace batteries; point remote at IR sensor on TV front; remove obstacles.
Poor TV reception	Antenna/scanning	Check antenna connection; perform Auto Search in channel menu.

Reset: MENU > SYSTEM > RESET to factory defaults (will erase settings).

Service: 1-855-387-7466; www.furrion.com