Flexsolar G100 Instruction Manual-Warranty

The Flexsolar G100 is a portable solar power generator designed for outdoor activities, emergency backup, and off-grid power needs. It features a high-capacity lithium battery, multiple output ports (AC, DC, USB), MPPT solar charge controller, pure sine wave inverter, LCD display for monitoring, and rugged construction. Below are key sections covering safety, features, operation, maintenance, and warranty information.

1. Features at a Glance 2. Safety Precautions 3. Initial Setup & Charging 4. Specifications 5. Controls and Indicators 6. Connecting Devices 7. Solar Panel Connection 8. Maintenance & Storage 9. Troubleshooting 10. Warranty Information 11. Regulatory & Support

Features at a Glance

Key components: Lithium-ion battery pack, Pure sine wave AC inverter, MPPT charge controller, LCD status display, Multiple output ports, Carrying handle.

Feature	Description
Battery Capacity	1000Wh (Lithium NMC)
AC Output	2 x 120V AC outlets (300W continuous, 600W surge)
DC Output	12V/10A car port, 2 x 5.5mm DC ports
USB Ports	2 x USB-A (5V/2.4A), 1 x USB-C PD (60W)
Solar Input	MPPT, max 200W, 12-24V DC
AC Charging	Standard wall outlet (0-100% in ~7 hours)
LCD Display	Shows battery level, input/output power, warnings
Cooling Fan	Automatic temperature-controlled ventilation
Protections	Overload, short circuit, over-temperature, low voltage
Weight	22 lbs (10 kg)

Safety Precautions

Read all instructions before use. Keep unit dry and away from heat sources.

Do not disassemble or modify the unit.
Use only approved solar panels and cables.
Do not connect to household AC wiring directly.
Keep away from children and pets.
Do not expose to fire or immerse in water.

WARNING! Risk of electric shock. Do not open casing. Service by qualified personnel only.

Initial Setup & Charging

First use: Fully charge before operation.

AC Charging: Plug included AC adapter into wall outlet and unit's DC input.
Solar Charging: Connect compatible solar panel to solar input port.
Battery Indicator: LCD shows charging status and battery percentage.
Initialization: Allow unit to complete first charge cycle (fan may run).

CAUTION! Use only provided or certified charging accessories. Ensure proper ventilation during charging.

Specifications

Model: Flexsolar G100
Battery Type: Lithium NMC, 1000Wh
AC Output: 120V, 60Hz, 300W continuous (600W surge)
DC Output: 12V/10A (car port), 12V/5A (DC ports)
USB Output: USB-A: 5V/2.4A, USB-C PD: up to 60W
Solar Input: 12-24V DC, 200W max, MPPT
AC Charging Input: 110-120V AC, 60Hz, 150W
Display: Backlit LCD with real-time metrics
Operating Temp: 32°F to 104°F (0°C to 40°C)
Storage Temp: -4°F to 113°F (-20°C to 45°C)

Controls and Indicators

Front Panel: Power button, LCD display, Output ports, Input ports.

LCD Icons: Battery level (%), Input power (W), Output power (W), Warning symbols (overload, temperature, low battery).

Power Button: Press to turn AC/DC outputs on/off. Hold 3 seconds to turn unit completely off.

LED Indicators: Green (charging), Blue (operational), Red (fault/warning).

Connecting Devices

Ensure total load does not exceed rated capacity.

AC Devices: Plug into AC outlets (max 300W total).
DC Devices: Use car port or DC ports with appropriate adapter.
USB Devices: Connect phones, tablets, lights directly.
Turn on power button after connections are made.

Tip: Start with highest power device first to avoid overload tripping.

Solar Panel Connection

For optimal solar charging:

Use solar panel with open-circuit voltage between 12-24V DC.
Connect panel to unit's solar input port using MC4 to XT60 cable (included).
Place panel in direct sunlight, angled toward sun.
LCD will show solar input power and charging status.
Maximum solar input: 200W. Exceeding may trigger protection.

WARNING! Do not connect solar panel while unit is powering loads. Disconnect in poor weather.

Maintenance & Storage

Clean with dry cloth only. Store in cool, dry place.

Recharge every 3 months if storing long-term.
Keep battery between 20-80% for storage.
Do not stack heavy items on unit.
Check ports for debris before connecting.

CAUTION! Do not leave in hot car or direct sunlight for extended periods.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Unit off / battery empty	Press power button; charge battery fully.
Overload protection	Connected load too high	Disconnect devices; restart with lower load.
Not charging from solar	Poor sunlight / wrong cable	Ensure direct sun; verify cable connection.
Fan runs continuously	High temperature / high load	Move to cooler area; reduce load.
LCD shows error code	Internal fault	Note code; contact support.

Reset: Turn off, disconnect all devices, wait 1 minute, restart.

Warranty Information

Flexsolar G100 is covered by a limited warranty.

Warranty Period: 24 months from date of purchase.
Coverage: Defects in materials and workmanship under normal use.
Exclusions: Damage from misuse, accidents, unauthorized modifications, improper maintenance, or wear from normal use.
Battery Capacity: Warranted to retain ≥80% of original capacity for 24 months.
Claim Process: Contact support with proof of purchase. Do not return without authorization.
Service: Repair or replacement at manufacturer's discretion.

This warranty gives you specific legal rights; you may have other rights which vary by state.

Regulatory & Support

Support: For technical assistance, warranty claims, or manuals:

Website: www.flexsolar.com/support
Email: [email protected]
Phone: 1-800-555-9876 (Mon-Fri, 9am-5pm EST)
Address: Flexsolar Inc., 123 Green Energy Blvd, Solar City, CA 90210