Flexsolar F120 Instruction Manual-Warranty

The Flexsolar F120 is a portable 120W monocrystalline solar panel designed for off-grid power generation, featuring high-efficiency cells, a durable ETFE laminate surface, IP67 waterproof rating, integrated kickstand, USB-A and USB-C outputs, DC 5521 output port, and included alligator clips for direct battery charging. Below are key sections covering safety, features, installation, operation, maintenance, and the comprehensive warranty policy.

1. Features at a Glance 2. Safety Precautions 3. Installation & Setup 4. Specifications 5. Operation Guide 6. Connecting Devices 7. Maintenance & Storage 8. Troubleshooting 9. Warranty Information 10. Regulatory & Compliance 11. Support & Contact

Features at a Glance

Key components: Monocrystalline solar panel, Integrated charge controller, USB-A output port, USB-C PD output port, DC 5521 output port, Alligator clip cables, Kickstand, Carrying handle.

Feature	Description
Solar Panel	120W high-efficiency monocrystalline cells
Surface Material	ETFE laminate for durability and scratch resistance
Waterproof Rating	IP67 (fully waterproof and dustproof)
Output Ports	USB-A (5V/2.4A), USB-C PD (5V/3A, 9V/2A, 12V/1.5A), DC 5521 (12V/10A Max)
Charge Controller	Integrated MPPT for optimal power conversion
Kickstand	Adjustable for optimal sun angle
Alligator Clips	For direct connection to 12V batteries
Carrying Handle	Integrated for easy portability
Weight	Approximately 6.6 lbs (3 kg)
Dimensions (Folded)	24.8 x 17.3 x 1.2 inches

Safety Precautions

Read all instructions before use. Failure to follow safety guidelines may result in injury or damage.

Electrical Safety: Do not connect to AC mains. Use only with compatible 12V DC systems and devices.
Installation: Place on stable, non-flammable surface. Keep away from water sources except as intended by IP67 rating.
Operation: Avoid looking directly at the sun or reflective panel surface. Do not disassemble the unit.
Children: Keep out of reach of children. This is not a toy.

WARNING! Never short-circuit the output terminals. Do not expose to extreme heat above 158°F (70°C).

Installation & Setup

Unpack and inspect contents. Ensure all components are present and undamaged.

Positioning: Unfold the panel fully. Use the kickstand to angle the panel directly towards the sun.
Sunlight: For optimal performance, ensure the panel is in direct, unobstructed sunlight.
Connection: Connect your device or battery to the appropriate output port using the provided cables.
Indicator: The integrated LED indicator on the charge controller will light up when the panel is generating power.

CAUTION! Do not bend the panel excessively. Avoid placing heavy objects on the panel surface.

Specifications

Maximum Power (Pmax): 120W
Open Circuit Voltage (Voc): 21.6V
Short Circuit Current (Isc): 6.94A
Optimum Operating Voltage (Vmp): 18V
Optimum Operating Current (Imp): 6.67A
Cell Type: Monocrystalline Silicon
Output Ports: USB-A, USB-C PD, DC 5521
Operating Temperature: -4°F to 158°F (-20°C to 70°C)
Storage Temperature: -40°F to 185°F (-40°C to 85°C)
Warranty: 12-month limited warranty on materials and workmanship (see Section 9).

Operation Guide

Power generation begins automatically when the panel is exposed to sunlight and a device is connected.

Using USB Ports: Connect smartphones, tablets, power banks, or USB lights directly. The USB-C port supports Power Delivery for fast charging compatible devices.

Using DC Output: Connect to a 12V battery using the alligator clips (Red to positive, Black to negative). The integrated controller prevents overcharging.

Using with Power Stations: Connect the DC 5521 cable to the DC input of a compatible portable power station.

Performance Note: Actual output power depends on sunlight intensity, angle, temperature, and cloud cover.

Connecting Devices

Ensure the device or battery voltage is compatible (12V nominal for DC output).

Turn off or disconnect the device before connecting, if possible.
Match cables to ports (USB to USB, DC to DC).
For battery charging, connect positive (red) clip first, then negative (black). Disconnect in reverse order.
Check the device or battery indicator to confirm charging has begun.

Tip: For best results, clean the panel surface before use and adjust the angle every few hours to follow the sun.

Maintenance & Storage

Proper care extends the life of your solar panel.

Cleaning: Wipe the surface with a soft, damp cloth. Use mild soap if needed. Do not use abrasive cleaners.
Inspection: Regularly check cables and connectors for wear or damage.
Storage: Fold the panel neatly. Store in a cool, dry place away from direct sunlight when not in use for extended periods.
Transport: Use the carrying handle. Avoid sharp objects that could puncture the surface.

CAUTION! Do not immerse the charge controller or connectors in water. Although the panel is IP67, prolonged submersion is not recommended.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Insufficient sunlight, poor connection	Move panel to direct sun; check all cable connections are secure.
Low charging speed	Cloudy day, wrong panel angle, high temperature	Adjust panel angle; wait for better conditions; allow panel to cool if hot.
Device not charging via USB	Incompatible device, faulty cable	Try a different USB cable; ensure device supports charging via solar input.
Battery not charging via DC	Battery fully charged, reverse polarity, battery fault	Check battery voltage; verify correct clip connection (Red+/Black-).
LED indicator not on	No sunlight, internal fault	Ensure panel is in sun. If problem persists, contact support.

Reset: Disconnect all devices, fold the panel, wait 5 minutes, then redeploy in sunlight.

Warranty Information

Flexsolar Limited Warranty: Flexsolar warrants the F120 Portable Solar Panel to the original purchaser to be free from defects in material and workmanship for a period of twelve (12) months from the date of original retail purchase.

What is Covered: Repair or replacement, at Flexsolar's discretion, of any part proven defective under normal use and service.

What is Not Covered:

Damage from accident, misuse, abuse, neglect, improper installation, or unauthorized modification.
Damage from commercial use, Acts of God, or external causes such as fire or flooding.
Normal wear and tear, cosmetic damage, or gradual reduction in power output due to cell aging.
Any product where the serial number has been altered or removed.

Warranty Service: To obtain service under warranty, contact Flexsolar Customer Support with proof of purchase (receipt). You may be required to return the product at your expense for evaluation.

Limitation of Liability: THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. FLEXSOLAR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Regulatory & Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

CE Mark: Conforms to European safety, health, and environmental requirements.

RoHS: Compliant with the Restriction of Hazardous Substances directive.

Support & Contact

For technical support, warranty claims, or to purchase accessories:

Website: www.flexsolar.com/support
Email: [email protected]
Phone: 1-800-555-FLEX (1-800-555-3539)
Business Hours: Mon-Fri, 9 AM - 6 PM EST

Please have your product model (F120) and serial number ready when contacting support.