Flexsolar C60 Instruction Manual-Warranty

The Flexsolar C60 is a high-efficiency 60W portable solar panel designed for outdoor and emergency power applications. It features monocrystalline solar cells, a waterproof ETFE laminate, integrated kickstand, USB-A and USB-C outputs with smart IC technology, a built-in ammeter, and includes a carrying case and warranty documentation. Below are key sections covering safety, features, setup, operation, maintenance, warranty terms, and troubleshooting.

Features at a Glance

Key components: 60W Monocrystalline Solar Panel, ETFE Waterproof Laminate, Integrated Kickstand, USB-A Output Port (5V/3A), USB-C Output Port (5V/3A, 9V/2A, 12V/1.5A), Built-in Ammeter, Carrying Case.

Safety Information

Read all instructions before use. Keep panel away from children.

1. Electrical Safety: Do not disassemble or modify the panel or cables. Avoid contact with live terminals.
2. Environmental Safety: Use only in dry conditions. Do not expose to open flame or extreme heat.
3. Installation Safety: Ensure panel is securely positioned to prevent falling or wind damage.
4. Eye Safety: Do not stare directly at the sun or the reflective surface of the panel.

WARNING! This panel generates DC electricity when exposed to light. Avoid short-circuiting the outputs. Do not use if the laminate is punctured or damaged.

Package Contents

Unpack and verify all items are present.

• Flexsolar C60 60W Solar Panel (1)
• User Manual & Warranty Card (1)
• Carrying Case (1)
• USB-A to USB-C Cable (1)
• Quick Start Guide (1)

NOTE: Contact customer support if any item is missing or damaged.

Specifications

• Maximum Power (Pmax): 60W
• Open Circuit Voltage (Voc): 21.6V
• Short Circuit Current (Isc): 3.47A
• Optimum Operating Voltage (Vmp): 18V
• Optimum Operating Current (Imp): 3.33A
• Cell Type: Monocrystalline Silicon
• Panel Efficiency: Up to 23%
• Output Ports: USB-A, USB-C (PD)
• Water & Dust Resistance: IP67
• Warranty: 12 Months Limited Warranty

Setup & First Use

Unfold the panel and position for optimal sunlight.

1. Unfold: Lay panel flat on a stable, clean surface.
2. Angle Adjustment: Deploy the kickstand to tilt panel towards the sun (approx. 30-45°).
3. Sun Exposure: Ensure the entire panel surface is in direct sunlight, avoiding shadows.
4. Connect Device: Use the provided cable to connect your device to the USB-A or USB-C port.
5. Check Output: The built-in ammeter will show current flow (0A to ~3A).

Tip: For best performance, clean the panel surface before first use and align it perpendicular to the sun's rays.

Operation Guide

Maximize charging efficiency with proper operation.

Optimal Conditions: Direct sunlight, clear sky, cool panel temperature.

Ammeter Reading: Displays real-time current. Higher numbers indicate better sunlight.

Charging Indicator: Your connected device should show a charging symbol.

Multiple Devices: You can charge one device per port simultaneously. Total output should not exceed 60W.

Storage: Fold the panel and store in the carrying case when not in use.

Charging Devices

Compatible with phones, tablets, power banks, and other USB devices.

1. Ensure panel is in sunlight and producing power (check ammeter).
2. Connect your device using a quality USB cable.
3. For fast charging (USB-C PD), use a PD-compatible cable and device.
4. If charging is slow, check sunlight intensity, cable quality, and device compatibility.

Note: Charging speed depends on sunlight, device battery level, and device charging protocol.

Maintenance & Storage

Proper care extends panel life.

Cleaning: Wipe surface with a soft, damp cloth. Do not use abrasive cleaners or high-pressure water.

Inspection: Regularly check for cracks, delamination, or cable damage.

Storage: Store in a cool, dry place inside the carrying case. Avoid prolonged exposure to temperatures above 140°F (60°C).

CAUTION! Do not fold the panel when wet. Ensure it is completely dry before storage to prevent mold or corrosion.

Warranty Terms

Flexsolar provides a 12-month limited warranty from the date of purchase.

Coverage: Warranty covers defects in materials and workmanship under normal use.

What is Covered:

• Failure of solar cells to produce rated power.
• Physical defects in laminate or construction.
• Failure of USB output ports.

What is NOT Covered:

• Damage from misuse, abuse, accident, or modification.
• Damage from improper storage or exposure to conditions beyond specifications.
• Normal wear and tear, scratches, or cosmetic damage.
• Consequential or incidental damages.

Warranty Service: Contact customer support with proof of purchase. Warranty is limited to repair or replacement at Flexsolar's discretion.

Regulatory & Compliance

This product complies with relevant safety and EMC standards.

FCC: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference.

RoHS: Compliant with Directive 2011/65/EU on the restriction of hazardous substances.

CE: Conforms to European safety, health, and environmental requirements.

Disposal: Dispose of according to local electronic waste (e-waste) regulations. Do not dispose of with household trash.

Troubleshooting

Support: For issues not resolved above, contact Flexsolar Customer Service.

Email: [email protected] | Phone: 1-800-555-FLEX (3539) | Web: www.flexsolar.com/support