Flashfish SP18V100W User Manual

The Flashfish SP18V100W is a compact, high-brightness LED video light designed for photography, videography, and live streaming. It features 100W LED output with adjustable color temperature (3200K-5600K), high Color Rendering Index (CRI≥95), built-in rechargeable battery, wireless remote control, multiple lighting effects, and compatibility with Bowens mount accessories. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Using Lighting Effects 8. Battery Management 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-power LED panel, Wireless Remote Control, Bowens Mount, Built-in Rechargeable Battery, Cooling Fan, Control Panel.

Feature	Description
LED Panel	100W output with adjustable color temperature
Wireless Remote	Controls power, brightness, and effects up to 15m
Bowens Mount	Compatible with softboxes, umbrellas, and filters
Rechargeable Battery	Built-in lithium battery for cordless operation
Cooling Fan	Prevents overheating during extended use
Control Panel	Touch buttons for manual adjustments
POWER	Turns light on/off
BRIGHTNESS +/-	Adjusts light intensity (10%-100%)
COLOR TEMP	Cycles through color temperatures
EFFECTS	Selects lighting modes (strobe, flash, etc.)

Installation

Unpack and inspect contents. Ensure all parts are present.

Mounting: Attach to light stand using 1/4" screw mount at bottom.
Accessories: Attach softbox or umbrella via Bowens mount ring.
Power: Charge battery fully before first use via included USB-C cable.
Remote: Insert batteries into wireless remote.

WARNING! Do not look directly at LED light at close range. Ensure stable mounting to prevent falls.

First-Time Setup

Power on light; follow initial setup steps.

Charge battery: Connect USB-C charger until indicator shows full charge.
Test remote: Point at light sensor, press POWER to confirm pairing.
Adjust settings: Use control panel to set default color temperature (4500K).
Mount accessory: Attach preferred modifier (softbox recommended).

CAUTION! Keep away from water and heat sources. Allow cooling between uses.

Specifications

Power Output: 100W LED equivalent.
Color Temperature: 3200K-5600K adjustable.
CRI: ≥95 for accurate color reproduction.
Battery: Built-in 6000mAh lithium, 1.5-2 hours runtime at 100%.
Charging: USB-C, 2-3 hours to full charge.
Control: Wireless remote (15m range) and manual panel.
Mount: Standard Bowens mount (S-type).
Dimensions: 180mm x 180mm x 80mm.
Weight: 850g.

Controls and Settings

Access controls via front panel or wireless remote.

Front Panel: POWER, BRIGHTNESS +/-, COLOR TEMP, EFFECTS, BATTERY INDICATOR.

Remote: POWER, BRIGHTNESS +/-, COLOR TEMP, EFFECTS, STROBE SPEED, MEMORY (save custom settings).

Brightness: Adjust from 10% to 100% in 10% increments. Color Temperature: Cycle through 3200K (warm), 4500K (neutral), 5600K (cool). Effects: Strobe, Flash, Lightning, Party modes. Memory: Save up to 3 custom combinations of brightness and color temp.

Connecting Devices

Connect to power source or sync with camera.

Charging: Use included USB-C cable to charge from wall adapter or power bank.
Camera Sync: Use remote to trigger strobe effects wirelessly.
Multiple Lights: Sync multiple SP18V100W units using same remote channel.

Tip: For studio use, consider AC adapter (sold separately) for continuous power.

Using Lighting Effects

Supports multiple creative lighting modes.

Select effect: Press EFFECTS button to cycle through modes.
Adjust speed: In strobe mode, use remote to set flash frequency.
Combine with color: Set color temperature before activating effect.
Save custom: Hold MEMORY button for 3 seconds to save current settings.

WARNING! Strobe effects may affect photosensitive individuals. Use with caution.

Battery Management

Built-in lithium battery requires proper care.

Charging: Indicator blinks red during charge, solid green when full.
Runtime: 1.5-2 hours at 100% brightness, longer at lower settings.
Storage: If not used for >1 month, charge to 50% and store in cool, dry place.
Replacement: Battery not user-replaceable; contact service if capacity degrades.

Care & Cleaning

Turn off and disconnect power before cleaning.

LED Panel: Use soft, dry cloth to gently wipe surface.
Body: Damp cloth (water only) for exterior; avoid ports and openings.
Mount: Keep Bowens mount free of dust and debris.

CAUTION! Do not use chemicals or abrasive materials. Never immerse in water.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2023 Flashfish; trademarks of Flashfish Technologies. For support, visit www.flashfish.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light won't turn on	Battery depleted	Charge battery; check power connection.
Remote not working	Batteries/range	Replace remote batteries; ensure within 15m line-of-sight.
Overheating	Extended use	Turn off and allow to cool; ensure fan vents are unobstructed.
Inconsistent brightness	Low battery	Recharge battery; reduce brightness setting.
Color temperature stuck	Button malfunction	Reset by holding POWER + COLOR TEMP for 10 seconds.

Reset: Hold POWER + BRIGHTNESS - for 10 seconds to factory reset.

Service: [email protected]; www.flashfish.com/support