The Firefly FEL6116 is a high-performance LED flashlight designed for professional and outdoor use, featuring multiple brightness modes, strobe and SOS functions, durable aluminum construction, waterproof rating (IPX8), rechargeable lithium-ion battery, USB-C charging, adjustable focus beam, pocket clip, and tactical tail switch. Below are key sections for safety, features, operation, maintenance, and troubleshooting.
Key components: LED emitter, Aluminum body, Tail switch, Mode button, USB-C charging port, Pocket clip, Adjustable focus bezel.
| Feature | Description |
|---|---|
| LED Emitter | High-intensity CREE LED with long lifespan |
| Brightness Modes | Low, Medium, High, Turbo, Strobe, SOS |
| Battery | Rechargeable 18650 lithium-ion (included) |
| Charging Port | USB-C for convenient recharging |
| Waterproof Rating | IPX8 (submersible up to 2 meters) |
| Body Material | Aerospace-grade aluminum alloy |
| Beam Focus | Adjustable from spot to flood |
| Tail Switch | Tactical momentary and constant-on |
| Pocket Clip | Reversible for carry versatility |
| Dimensions | 140mm length x 25mm diameter |
Carefully unpack and verify all components are present.
WARNING! Do not look directly into LED when turned on. Keep away from children.
Prepare flashlight for initial use.
CAUTION! Use only provided or recommended 18650 battery. Incorrect batteries may cause damage.
Tail Switch: Momentary on (press) or constant on (twist). Mode Button: Cycle through brightness and special modes.
Mode Sequence: Low → Medium → High → Turbo → Strobe → SOS → Low
Special Functions: Press and hold mode button for 2 seconds to lock/unlock. Double-click from off for Turbo. Triple-click for Strobe.
Focus Adjustment: Rotate bezel clockwise for spot beam, counterclockwise for flood beam.
Use included USB-C cable and any 5V/2A USB power source.
Tip: Do not charge unattended. Disconnect when fully charged to prolong battery life.
Designed for various lighting scenarios.
WARNING! Turbo mode generates heat. Do not use continuously for more than 10 minutes.
Clean lens and body with soft, dry cloth. Apply silicone grease to O-rings periodically.
CAUTION! Do not disassemble beyond user-serviceable parts. Avoid solvents or abrasive cleaners.
Do not look directly at LED. Keep away from flammable materials when in use. Use only recommended charger and battery. Do not modify flashlight. Keep out of reach of children.
5-year limited warranty covering defects in materials and workmanship. Copyright © 2025 Firefly Lighting. For support, visit www.fireflylighting.com/support or contact 1-800-555-0199.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Flashlight won't turn on | Dead battery, loose tail cap | Charge battery; ensure tail cap is tightened securely. |
| Dim output | Low battery, dirty contacts | Recharge battery; clean battery and flashlight contacts. |
| Mode button not responding | Lock mode activated | Press and hold mode button for 2 seconds to unlock. |
| Not charging | Faulty cable, dirty port | Try different USB-C cable; clean charging port with dry cloth. |
| Water in lens | Damaged O-ring | Check and replace O-rings; ensure all seals are properly seated. |
Reset: Remove battery for 30 seconds, then reinstall.
Service: 1-800-555-0199; www.fireflylighting.com/support