Feit Electric PANEL-SOL-CAM Important Safety Instructions And Installation Manual
The Feit Electric PANEL-SOL-CAM is a solar-powered, motion-activated security camera with integrated floodlight panel. It is designed for outdoor use, featuring wireless installation, HD video recording, two-way audio, weather resistance, and integration with smart home systems via Wi-Fi. Below are critical sections covering safety warnings, installation procedures, initial setup, specifications, operation, maintenance, and troubleshooting.
Important Safety Instructions
Read all safety instructions before installation or use. Failure to follow may result in electric shock, fire, or injury.
| Warning | Description |
|---|
| Electrical Safety | Turn OFF power at circuit breaker before beginning installation. Ensure wiring is de-energized. |
| Installation Location | Install only in locations specified in this manual. Do not install near flammable materials or gas lines. |
| Weather Resistance | Unit is rated for outdoor use. Ensure all seals are properly tightened. Do not submerge in water. |
| Solar Panel | Position solar panel to receive direct sunlight. Keep clear of obstructions like branches or debris. |
| Ladder Safety | Use a stable ladder. Have a helper present. Do not overreach. |
| Battery Handling | Do not open, crush, or expose internal battery to high heat or fire. Replace only with specified battery. |
| Wi-Fi & Signal | Ensure strong Wi-Fi signal at installation location for proper operation. |
SAVE THESE INSTRUCTIONS!
Package Contents & Specifications
Unpack and verify all components are present before proceeding.
- Main Unit: Solar Panel Security Camera with Integrated Floodlight.
- Mounting Bracket & Hardware: Screws, wall anchors, mounting template.
- Charging Cable: USB-C cable for initial/backup charging.
- Quick Start Guide & Warranty Card.
Specifications:
- Power Source: Integrated Solar Panel, Rechargeable Battery (Backup: USB-C).
- Video: 1080p HD, Night Vision, 120° Field of View.
- Connectivity: 2.4 GHz Wi-Fi (802.11 b/g/n).
- Features: Motion Detection, Two-Way Audio, Siren, IP65 Weather Resistance.
- Operating Temperature: -20°C to 50°C (-4°F to 122°F).
- Compatibility: Feit Electric App (iOS/Android).
Installation Planning & Requirements
Proper planning ensures optimal performance and safety.
- Select Location: Choose an outdoor location (eave, wall, post) with:
- Clear line of sight to area you wish to monitor.
- Maximum direct sunlight on solar panel (6+ hours recommended).
- Within range of your 2.4 GHz Wi-Fi router.
- Tools Required: Power Drill, Screwdriver, Stud Finder (if mounting to wood/masonry), Ladder, Smartphone with Feit Electric App installed.
- Power Check: Ensure the unit's internal battery is charged via USB-C before mounting (LED indicator will show solid green when full).
CAUTION! Do not install within 10 feet of a swimming pool or spa.
Step-by-Step Installation
Follow these steps carefully for secure mounting.
- Turn Off Power: If replacing an existing fixture, turn OFF power at the circuit breaker.
- Mount Bracket: Use the mounting template to mark drill holes. Drill holes and insert wall anchors (if needed). Secure the mounting bracket using provided screws.
- Attach Camera Unit: Align the camera unit with the bracket and twist clockwise until it locks into place. Ensure it is firmly secured.
- Adjust Angle: Loosen the adjustment knob, aim the camera and solar panel to desired positions, then tighten the knob.
- Secure Wiring (if applicable): If connecting to existing wiring for constant backup power, follow the wiring diagram in the bracket compartment. Ensure all wire nuts are secure and no bare wire is exposed.
WARNING! If connecting to household wiring, all connections must comply with local electrical codes. If unsure, consult a licensed electrician.
Initial Setup & App Configuration
Configure the device via the Feit Electric App for full functionality.
- Power On: The unit will power on automatically once mounted. The status LED will blink blue.
- Download App: On your smartphone, download the "Feit Electric" app from the Apple App Store or Google Play Store.
- Create Account: Open the app and create a new account or log in.
- Add Device: Tap the "+" icon, select "Security Cameras", then "PANEL-SOL-CAM". Follow the in-app instructions to connect the camera to your Wi-Fi network.
- Ensure your phone is connected to the 2.4 GHz Wi-Fi band.
- You may need to press the reset button on the camera unit to enter pairing mode.
- Configure Settings: Once connected, configure motion zones, sensitivity, alert preferences, and siren settings within the app.
Operation & Features
Control and monitor your camera through the Feit Electric App.
| Feature | Description | Control Method |
|---|
| Live View | Stream real-time video to your phone. | Open app, select camera, tap "Live View". |
| Motion Detection | Camera records and sends alert upon detecting motion. | Configure zones/sensitivity in App > Settings. |
| Two-Way Audio | Speak and listen through built-in microphone and speaker. | Tap microphone icon in Live View. |
| Floodlight Control | Manual on/off or set to activate with motion. | App controls or motion settings. |
| Siren | Trigger a loud alarm manually or automatically upon motion detection. | App controls or automation rules. |
| Night Vision | Automatically activates in low light. | Auto-enabled; can adjust IR intensity in settings. |
Tip: Use the solar panel's performance monitor in the app to ensure it is receiving adequate sunlight.
Maintenance & Care
Regular maintenance ensures longevity and optimal performance.
- Cleaning: Periodically clean the camera lens and solar panel with a soft, dry cloth. Do not use chemicals or abrasive materials.
- Inspection: Every 3-6 months, check mounting hardware for tightness and inspect the housing for cracks or damage.
- Battery Health: Monitor battery level in the app. If performance declines, use the USB-C cable for a full recharge. The battery is not user-serviceable; contact support if replacement is needed.
- Winter Care: Clear snow and ice from the solar panel promptly.
CAUTION! Never disassemble the unit. Doing so voids the warranty and may cause damage.
Regulatory & Compliance Information
This device complies with relevant standards and regulations.
- FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to interference that may cause undesired operation.
- IC Compliance: Complies with Industry Canada license-exempt RSS standard(s).
- Disposal: Dispose of the product and batteries in accordance with local environmental regulations. Do not dispose of with household waste.
- Warranty: Limited warranty provided by Feit Electric. Refer to included warranty card for terms and duration.
- Support: For technical support, visit www.feit.com/support or call 1-866-326-1984.
Troubleshooting
| Symptom | Possible Cause | Corrective Action |
|---|
| Camera won't power on | Battery depleted, solar panel obstructed. | Charge via USB-C cable. Ensure solar panel gets direct sunlight. |
| Cannot connect to Wi-Fi | Weak signal, incorrect password, 5 GHz network. | Ensure camera is within router range. Use 2.4 GHz network. Re-enter password. |
| No motion alerts | Motion zones disabled, sensitivity too low. | Check motion settings in app. Adjust sensitivity and zones. |
| Poor video quality | Weak Wi-Fi, dirty lens, low light. | Improve Wi-Fi signal strength. Clean lens. Check night vision operation. |
| Floodlight not turning on | Settings, faulty LED. | Check app settings for manual/auto control. If LED fails, contact support. |
| App shows "Offline" | Power loss, Wi-Fi disconnect. | Check power/battery. Restart camera and router. Re-add device in app. |
Reset Procedure: Press and hold the reset button (inside unit) for 10 seconds until LED flashes rapidly. Unit will reboot to factory settings.
Service: 1-866-326-1984; www.feit.com/support
Feit Electric PANEL-SOL-CAM Important Safety Instructions And Installation Manual © - All Rights Reserved 2025