Ezviz Solar Charging Panel-D Manual

The Ezviz Solar Charging Panel-D is a high-efficiency solar panel designed to power compatible Ezviz security cameras and devices. It features weather-resistant construction, adjustable mounting brackets, smart charging management, and compatibility with various Ezviz camera models. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: High-efficiency solar panel, adjustable mounting bracket, weather-resistant casing, power output cable, status LED indicator.

Package Contents

Unpack and verify all components are present before installation.

1. Ezviz Solar Charging Panel-D (main unit)
2. Adjustable mounting bracket with joint
3. Power output cable with connector
4. Mounting screws and wall anchors
5. Installation template
6. Quick start guide

WARNING! Do not discard packaging until all components are verified. Contact support if any items are missing or damaged.

Installation Guide

Proper installation ensures optimal performance and safety.

1. Select Location: Choose a location with maximum direct sunlight (south-facing recommended in northern hemisphere).
2. Mount Bracket: Use template to mark screw holes. Drill holes and secure bracket using provided hardware.
3. Attach Panel: Secure solar panel to bracket and adjust angle for optimal sun exposure (typically 30-45 degrees).
4. Route Cable: Route power cable to camera location, securing it with cable clips (not included).
5. Connect to Device: Connect power cable to compatible Ezviz camera's power input port.
6. Verify Connection: Check LED indicator for proper charging status.

CAUTION! Install at height where it cannot be easily tampered with. Ensure all connections are weatherproof.

Specifications

• Panel Type: Monocrystalline silicon
• Maximum Power Output: [Specify wattage, e.g., 5W/10W]
• Output Voltage: DC [Specify voltage, e.g., 5V/12V]
• Weatherproof Rating: IP65
• Operating Temperature: -20°C to 60°C (-4°F to 140°F)
• Cable Length: [Specify length, e.g., 3 meters/10 feet]
• Dimensions: [Specify dimensions, e.g., 200mm x 150mm x 25mm]
• Weight: [Specify weight, e.g., 0.8 kg/1.76 lbs]
• Compatible Devices: Ezviz models [List compatible models]
• Warranty: [Specify warranty period]

Controls and Indicators

The solar panel features minimal controls with status indication through LED.

Status LED Indicators:

• Solid Green: Normal operation, charging connected device
• Flashing Green: Charging in progress with sufficient sunlight
• Solid Red: Connection error or device not charging
• Flashing Red: Low sunlight conditions or insufficient power
• No Light: No power generation (nighttime or completely covered)

Physical Controls: None - operation is automatic based on sunlight and connected device status.

Connecting to Devices

Compatible with specific Ezviz security cameras and devices.

1. Ensure both solar panel and camera are powered off during connection.
2. Connect the power cable from solar panel to camera's power input port.
3. Secure connection with weatherproof cover if available.
4. Power on camera and verify charging status via LED indicator.
5. For multiple devices, consult Ezviz documentation for parallel connection guidelines.

Tip: Always use original Ezviz cables and connectors for optimal performance and safety.

Charging Operation

The solar panel operates automatically when exposed to sunlight.

1. Automatic Operation: Panel begins charging when sunlight is detected and device is connected.
2. Optimal Positioning: Adjust panel angle seasonally for maximum sun exposure.
3. Charging Efficiency: Efficiency varies with weather, season, and panel orientation.
4. Battery Protection: Smart charging circuit prevents overcharging of connected devices.
5. Low Light Operation: Panel may operate at reduced efficiency in cloudy conditions.
6. Night Operation: No charging occurs at night; connected device operates on battery if applicable.

WARNING! Do not attempt to disassemble the panel. Do not expose to extreme temperatures beyond specified range.

Maintenance & Care

Regular maintenance ensures optimal performance and longevity.

1. Cleaning: Wipe panel surface with soft, damp cloth to remove dust, dirt, and debris.
2. Frequency: Clean every 1-2 months or as needed based on environment.
3. Inspection: Regularly check mounting hardware, cables, and connections for damage.
4. Winter Care: Remove heavy snow accumulation gently with soft brush.
5. Storage: If storing, keep in dry, cool place away from direct sunlight.

CAUTION! Do not use abrasive cleaners, chemicals, or high-pressure water. Do not walk on or apply pressure to panel surface.

Regulatory Information

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CE certified for European markets. RoHS compliant. Copyright © [Year] Ezviz. All trademarks are property of their respective owners. For support, visit www.ezviz.com or contact customer service at [support phone number].

Troubleshooting

Reset: Disconnect and reconnect power cable to reset charging circuit.

Service: [Support phone number]; www.ezviz.com