Etrailer e62PR Manual

The Etrailer e62PR is a premium 6x12-foot enclosed cargo trailer designed for heavy-duty hauling, featuring a 7,000 lb GVWR, all-steel construction, rear ramp door, side door, LED lighting, radial tires, and Dexter torsion axle. Below are key sections for safety, features, setup, operation, maintenance, and troubleshooting.

Features at a Glance

Key components: All-steel frame and walls, Rear ramp door with latch, Side entry door, LED clearance/marker lights, 15-inch radial tires, Dexter torsion axle, 2-inch coupler, Safety chains, Breakaway kit.

Installation & Setup

Unpack and inspect contents. Ensure level ground for assembly.

1. Coupler setup: Adjust coupler height to match tow vehicle ball (typically 17-19 inches).
2. Light connection: Plug 7-pin connector into vehicle; test all lights (running, brake, turn).
3. Tire pressure: Inflate to 50 psi (cold) as indicated on tire sidewall.
4. Breakaway system: Connect battery; test switch by pulling pin.

WARNING! Trailer is heavy; use proper lifting equipment. Ensure all bolts are torqued to specification.

First-Time Use

Before towing, complete pre-trip inspection.

1. Weight distribution: Load 60% forward of axle for stability.
2. Secure cargo: Use tiedowns rated for load; check clearance.
3. Coupler lock: Secure latch over ball; insert lock pin.
4. Safety chains: Cross under coupler; attach to vehicle frame.
5. Test brakes: If equipped, test brake controller operation.

CAUTION! Do not exceed GVWR or tongue weight limit (700 lbs). Ensure load is balanced.

Specifications

• Exterior Dimensions: 12' L x 6' W x 6'6" H.
• Interior Dimensions: 11'10" L x 5'8" W x 6'2" H.
• Weight Capacity: 7,000 lbs GVWR; 1,500 lbs empty weight.
• Suspension: Dexter torsion axle (3,500 lb capacity).
• Brakes: Electric brakes on both wheels (optional).
• Tires: ST205/75R15 radial, Load Range C.
• Coupler: 2-inch ball, 3,500 lb weight rating.
• Lighting: DOT-approved LED lights.
• Finish: White powder-coated exterior.

Controls and Operation

Primary controls: Coupler latch, Ramp door latch, Side door lock, Breakaway switch, Light connectors.

Coupler: Lift handle to open; lower onto ball; push handle down to lock; insert pin. Ramp Door: Pull latch to release; lower slowly; secure with support rods. Side Door: Turn key to lock/unlock; handle operates latch. Breakaway System: Pull pin to activate trailer brakes if separated. Lights: 7-pin plug provides running, brake, turn signals.

Connecting to Vehicle

Ensure vehicle is rated to tow trailer weight.

1. Park vehicle and trailer on level ground.
2. Adjust coupler height to match ball height.
3. Back vehicle slowly until ball is under coupler.
4. Lower coupler onto ball; lock latch and insert pin.
5. Connect safety chains in crisscross pattern.
6. Plug 7-pin connector into vehicle outlet.
7. Test lights and brakes before moving.

Tip: Grease ball periodically for smooth coupling.

Loading Procedures

Proper loading ensures safe towing.

1. Position trailer on level ground; set parking brake.
2. Lower ramp door; ensure support rods are engaged.
3. Load heaviest items first, centered side-to-side.
4. Place 60% of load forward of axle centerline.
5. Secure all items with straps, chains, or blocks.
6. Close ramp door; latch securely.
7. Check tongue weight with scale (target 10-15% of trailer weight).

WARNING! Do not exceed maximum cargo weight. Distribute weight evenly to prevent sway.

Safety Features

Breakaway system: Activates brakes if trailer separates. Safety chains: Required cross-under connection. LED lighting: High-visibility lights for night towing. Radial tires: Provide stability and load capacity.

Care & Maintenance

Regular maintenance ensures longevity.

• Monthly: Check tire pressure; inspect lights; lubricate coupler and hinges.
• Every 6 months: Inspect brake system (if equipped); check wheel bearing grease.
• Annually: Inspect frame for rust; repaint as needed; check axle alignment.

CAUTION! Store in dry area; keep roof clear of debris; avoid harsh chemicals on finish.

Regulatory Information

DOT compliant: Meets Federal Motor Vehicle Safety Standards. Lighting meets SAE J585. For use on public roads; check local regulations for requirements. Copyright © 2025 Etrailer; trademarks of Etrailer.com. For support, visit www.etrailer.com or contact 1-800-298-8924.

Troubleshooting

Service: 1-800-298-8924; www.etrailer.com