Energizer Solar Sunpack 100 User Manual

The Energizer Solar Sunpack 100 is a portable solar charger designed for charging USB-powered devices such as smartphones, tablets, cameras, and GPS units. It features a high-efficiency monocrystalline solar panel, a built-in 10000mAh lithium-ion battery, dual USB output ports (5V/2.1A total), an integrated LED flashlight, water-resistant construction, and multiple charging modes (solar, wall outlet, car adapter). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging Modes 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Solar panel, Power button, LED indicator lights, USB output ports, Flashlight button, Carabiner clip.

Feature	Description
Solar Panel	High-efficiency monocrystalline panel for solar charging
Battery Capacity	Built-in 10000mAh lithium-ion battery
USB Output Ports	Dual USB ports (5V/2.1A total output)
LED Indicator Lights	4-level battery charge indicator (25%, 50%, 75%, 100%)
Flashlight	Integrated LED flashlight with multiple modes (steady, SOS, strobe)
Carabiner Clip	For easy attachment to backpacks or belts
Micro-USB Input Port	For charging the battery via wall outlet or car adapter
Power Button	Turns charger on/off and activates flashlight
Water Resistance	IPX4 rated for protection against splashing water
Charging Modes	Solar, wall outlet, car adapter

Installation

Unpack and inspect contents. Ensure all components are present.

Position solar panel: Place in direct sunlight with panel facing the sun.
Attach carabiner: Clip to backpack, tent, or other secure location during outdoor use.
Connect charging cable: Use included Micro-USB cable for initial wall charging.
Check LED indicators: Press Power button to verify battery level.

WARNING! Do not expose to extreme temperatures or submerge in water. Keep away from children.

First-Time Setup

Before first use, fully charge the battery via wall outlet.

Initial charge: Connect Micro-USB cable to wall adapter and charger. Charge until all 4 LED indicators are solid.
Solar charging test: Place in direct sunlight for 2-3 hours to verify solar panel functionality.
Device connection: Connect your USB device using appropriate cable to one of the USB ports.
Flashlight operation: Press and hold Power button for 2 seconds to activate flashlight; press again to cycle modes.

CAUTION! Use only included or certified cables/adapters. Do not charge in temperatures below 0°C or above 45°C.

Specifications

Battery Type: Lithium-ion, 10000mAh.
Solar Panel: Monocrystalline, 5W.
Input: Micro-USB, 5V/2A (wall/car).
Output: Dual USB, 5V/2.1A total.
Flashlight: LED, 3 modes (steady, SOS, strobe).
Indicators: 4 LED battery level indicators.
Water Resistance: IPX4.
Dimensions: 6.3 x 3.1 x 0.8 inches.
Weight: 12.3 ounces.
Operating Temp: 0°C to 45°C.

Controls and Settings

Power Button: Short press to check battery level; long press (2 seconds) to turn on/off charger and activate flashlight.

LED Indicators: 4 blue LEDs show battery level (1 flash = 25%, 2 = 50%, 3 = 75%, 4 solid = 100%). Flashing during charging; solid when fully charged.

Flashlight Modes: Press Power button quickly to cycle through steady, SOS, and strobe modes. Press and hold to turn off.

Auto-shutoff: Charger turns off automatically if no device is connected for 30 seconds.

Connecting Devices

Compatible with most USB-powered devices (smartphones, tablets, cameras, etc.).

Ensure charger is on (LED indicators visible).
Use device's original USB cable or certified cable.
Plug cable into one of the USB output ports on the charger.
Connect other end to your device.
Charging begins automatically; LED indicators will flash during charging.

Tip: For fastest charging, use wall outlet to charge the Sunpack first, then charge your device.

Charging Modes

Three methods to charge the Sunpack 100 battery:

Solar Charging: Place in direct sunlight with solar panel facing sun. Charging time varies with sunlight intensity (approx 10-15 hours for full charge).
Wall Outlet Charging: Use included Micro-USB cable and wall adapter (not included). Full charge in approx 6-7 hours.
Car Adapter Charging: Use 12V car adapter with Micro-USB cable. Full charge in approx 6-7 hours.

Note: You can charge devices while the Sunpack is being charged via solar or outlet.

Safety Features

Overcharge Protection: Automatically stops charging when battery is full. Short-Circuit Protection: Safeguards against short circuits in connected devices. Temperature Control: Prevents charging in extreme temperatures. Overcurrent Protection: Limits output current to safe levels.

Care & Cleaning

Use dry, soft cloth to clean solar panel and casing. For stubborn dirt, use slightly damp cloth. Do not use chemicals or abrasives.

CAUTION! Do not immerse in water. Store in cool, dry place when not in use. Avoid prolonged exposure to direct sunlight when not charging.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Not charging via solar	Insufficient sunlight/angle	Place in direct sunlight; adjust panel angle; clean solar panel.
Device not charging	Cable/charger off	Ensure charger is on; try different USB cable; check device compatibility.
LED indicators not working	Battery depleted	Charge via wall outlet for 1 hour; press Power button.
Slow charging	Weak sunlight/multiple devices	Use wall charging for faster results; charge one device at a time.
Flashlight not working	Battery empty/button issue	Charge battery; press and hold Power button for 2 seconds.

Reset: Fully discharge then fully recharge battery if performance issues occur.

Service: 1-800-383-7323; www.energizer.com