Energizer EOB1-1003-WHT Quick Start Manual

The Energizer EOB1-1003-WHT is a compact, energy-efficient LED light bulb designed for standard household use. It features a warm white color temperature, a standard E26 base for easy installation, and is suitable for use in enclosed fixtures. This guide provides essential information for safe installation, operation, and troubleshooting.

Features at a Glance

Key components: LED light source, E26 screw base, plastic housing.

Installation

Unpack and inspect the bulb. Ensure the fixture is turned off and cool to the touch.

1. Turn off power: Switch off the light fixture at the wall switch and/or circuit breaker.
2. Remove old bulb: Allow old bulb to cool, then unscrew counterclockwise.
3. Insert new bulb: Align EOB1-1003-WHT base with socket and screw in clockwise until snug. Do not overtighten.
4. Restore power: Turn on the fixture at the wall switch.

WARNING! To prevent electric shock or fire, ensure power is off before installation. Do not exceed the fixture's maximum wattage rating.

First-Time Setup

After installation, simply turn on the light.

1. Power on: Turn on the wall switch. The bulb should illuminate instantly.
2. Check operation: Ensure the light is stable and at full brightness.
3. Dimmer check: If using with a dimmer, test the dimming range slowly from low to high.

CAUTION! Handle the bulb by its base only. Avoid touching the LED module directly.

Specifications

• Model: EOB1-1003-WHT
• Light Technology: LED
• Wattage: 9W (60W Equivalent)
• Lumens: 800 lm
• Color Temperature: 2700K (Warm White)
• Base: E26 Medium Screw
• CRI (Color Rendering Index): >80
• Dimmable: Yes (with compatible dimmers)
• Life: 15,000 hours
• Voltage: 120V AC, 60Hz
• Operating Temperature: -20°C to 40°C

Controls and Settings

This bulb is controlled solely by the connected light switch or dimmer. No onboard controls are present.

Wall Switch: Standard ON/OFF control.

Dimmer Switch: For adjustable brightness. Ensure the dimmer is listed as compatible with LED bulbs. If flickering occurs, the dimmer may need replacement with an LED-specific model.

Connecting to Fixtures

Compatible with any standard E26 socket in table lamps, ceiling fixtures, porch lights, and enclosed fixtures.

1. Ensure fixture is rated for the bulb's equivalent wattage and is in good condition.
2. Screw bulb into socket firmly but do not force it.
3. For outdoor fixtures, ensure they are rated for damp or wet locations if applicable.

Tip: For best performance and longevity, use in well-ventilated fixtures.

Operation

Designed for simple, maintenance-free operation.

1. Turn On: Use the wall switch. The bulb reaches full brightness instantly.
2. Dimming: If compatible, use the dimmer switch to adjust light level.
3. Turn Off: Use the wall switch. The bulb will cool down.

WARNING! Do not use in totally enclosed recessed fixtures unless specified. Allow bulb to cool before handling.

Safety Features

Overheat Protection: Built-in thermal management helps prolong life. Electrical Isolation: Designed to meet safety standards for household voltage.

Care & Cleaning

Ensure the bulb is off and completely cool. Unplug the lamp or turn off power at the circuit breaker for fixed fixtures.

Use a dry, soft cloth to gently wipe the bulb. Do not use liquids, cleaners, or abrasive materials.

CAUTION! Never clean the bulb while it is hot or in operation. Do not submerge in water.

Regulatory Information

FCC Part 15: This device complies with Part 15 of the FCC Rules. UL Listed: Certified for safety in the United States and Canada. Energy Star: May qualify for Energy Star certification (check packaging). For support, visit www.energizer.com or contact customer service.

Troubleshooting

Disposal: This LED bulb does not contain mercury and can be disposed of according to local regulations. Consider recycling where available.

Service: For warranty or product support, visit www.energizer.com or call the number on the packaging.