Elecaenta LSFC-120 User Manual

The Elecaenta LSFC-120 is a 120-watt LED Studio Fill Light with adjustable color temperature (3200K-5600K), high CRI (≥95), built-in dimmer control, LCD display, Bowens mount compatibility, included diffuser, AC/DC power options, and lightweight aluminum construction. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Mounting & Positioning 8. Maintenance & Storage 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED Panel, LCD Control Panel, Power Adapter, Mounting Bracket, Diffuser, Carrying Case.

Feature	Description
LED Panel	120W high-output LED array with high CRI
Color Temperature	Adjustable from 3200K (Warm) to 5600K (Daylight)
LCD Display	Shows brightness, color temperature, and settings
Dimmer Control	0-100% smooth brightness adjustment
Bowens Mount	Compatible with standard Bowens S-mount accessories
Power Input	AC 100-240V, 50/60Hz; DC 12V input option
Cooling System	Quiet fan with automatic temperature control
Control Buttons	Power, Mode, +, -, Menu
Mounting Points	1/4"-20 and 3/8"-16 threads for stands
Included Diffuser	Softens light output for even illumination

Installation

Unpack and inspect contents. Ensure all parts are present.

Attach mounting bracket: Secure bracket to light using provided screws.
Mount on stand: Attach to light stand using 1/4"-20 or 3/8"-16 thread.
Install diffuser: Slide diffuser into front frame slots until secure.
Connect power: Plug AC adapter into power input port and wall outlet.

WARNING! Ensure light stand is stable and rated for the weight. Do not overtighten mounting screws.

First-Time Setup

Power on light; configure initial settings.

Power on: Press POWER button on control panel.
Set color temperature: Use MODE button to select CCT, then +/- to adjust.
Adjust brightness: Use MODE to select Brightness, then +/- to set level.
Save preset: Hold MENU for 3 seconds, select Save Preset, choose slot 1-3.

CAUTION! Allow light to cool before handling after extended use.

Specifications

Power Output: 120W LED equivalent.
Color Temperature: 3200K-5600K adjustable.
CRI: ≥95 (Typical).
Brightness Control: 0-100% dimmable.
Beam Angle: 120° with diffuser.
Power Consumption: 130W max.
Input Voltage: AC 100-240V, 50/60Hz; DC 12V.
Operating Temperature: 0°C to 40°C (32°F to 104°F).
Dimensions: 300 x 200 x 80 mm (11.8" x 7.9" x 3.1").
Weight: 1.8 kg (4.0 lbs).

Controls and Settings

Access settings via control panel buttons. LCD shows current mode and values.

Buttons: POWER (On/Off), MODE (Cycle through settings), + (Increase), - (Decrease), MENU (Access menu).

Settings: Brightness (0-100%), Color Temperature (3200K-5600K), Fan Mode (Auto/Manual), Preset Recall (1-3), Factory Reset. Menu Options: System Info, Firmware Version, Power Save Timer, Display Brightness.

Connecting Devices

DC Input: For battery or external DC power. Sync Port: For multi-light synchronization (optional cable).

Turn off light before connecting devices.
Connect DC power: Use 12V DC input for portable power.
Sync multiple lights: Connect sync cable between lights for coordinated control.
Use Bowens accessories: Attach softboxes, grids, or filters to mount.

Tip: Use only recommended power supplies and accessories.

Mounting & Positioning

For optimal lighting results.

Choose stand: Use sturdy light stand with appropriate weight capacity.
Adjust height: Position light at desired height and angle.
Set distance: Place 1-3 meters from subject for even coverage.
Angle light: Tilt bracket to achieve desired lighting effect.
Use modifiers: Attach softbox for diffused light or grid for focused beam.
Balance multiple lights: Use sync function for consistent settings across units.

WARNING! Secure all mounting hardware. Do not position where light may fall.

Maintenance & Storage

Unplug and cool before maintenance. Clean with dry, soft cloth only.

CAUTION! Do not use liquids or abrasive cleaners. Store in dry, cool place with included case.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Elecaenta; trademarks of Elecaenta Lighting Solutions. For support, visit www.elecaenta.com or contact 1-800-555-1234.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light won't turn on	Power connection	Check power cable connection; ensure outlet works; try different outlet.
Flickering light	Power supply/dimmer	Use recommended power supply; check dimmer setting; update firmware.
Overheating	Ventilation/fan	Ensure vents clear; check fan operation; reduce brightness in high temps.
Uneven brightness	Diffuser/LEDs	Ensure diffuser properly installed; check for LED failure.
Control panel unresponsive	Locked/firmware	Check for button lock; perform factory reset; update firmware.

Reset: Hold MENU + - for 5 seconds to factory reset.

Service: 1-800-555-1234; www.elecaenta.com/support