Ecoflow EF-Fold-P60-04 Manual

The Ecoflow EF-Fold-P60-04 is a portable power station designed for outdoor activities, emergency backup, and off-grid power needs. It features a 600Wh capacity, multiple output ports (AC, DC, USB), fast charging capability, LCD display for monitoring, lightweight foldable design, and advanced battery management system. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Lithium-ion battery pack, LCD display, AC outlets, DC carport, USB ports, charging input, power button, cooling fan.

Installation

Unpack and inspect contents. Place on stable, dry surface.

1. Initial Charge: Connect to AC wall outlet using provided cable.
2. Position Unit: Ensure ventilation openings are unobstructed.
3. Connect Devices: Use appropriate ports for your devices.
4. Power On: Press and hold power button for 3 seconds.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; monitor LCD display.

1. Initial Charge: Charge fully before first use (approx. 1.6 hours).
2. Display Settings: Check battery level and output settings via LCD.
3. Output Configuration: Select AC/DC output mode as needed.
4. Connect Devices: Start with low-power devices first.

CAUTION! Use only Ecoflow-approved cables and accessories.

Specifications

• Capacity: 600Wh (16.8Ah).
• Battery Type: Lithium-ion.
• AC Output: 600W continuous, 1200W surge.
• DC Output: 12V/10A.
• USB Output: USB-A 5V/2.4A, USB-C 60W max.
• Input: Solar 10-65V, AC 100-240V, Car 12V.
• Charging Time: 1.6 hours (AC), 3-6 hours (solar).
• Display: LCD with real-time monitoring.
• Weight: 7.3 kg (16.1 lbs).
• Operating Temp: -4°F to 140°F (-20°C to 60°C).

Controls and Settings

Access settings via LCD display and control buttons.

Front Panel: Power button, LCD display, AC outlets, USB ports, DC port.

LCD Display: Shows battery percentage, input/output power, estimated runtime, temperature warnings.

Settings Menu: Press power button twice to access: screen brightness, beep on/off, ECO mode (auto-shutdown), output voltage adjustment.

Connecting Devices

AC Devices: Plug into AC outlets. DC Devices: Use 12V carport. USB Devices: Connect to USB-A or USB-C.

1. Check device power requirements (watts/amps).
2. Ensure total load does not exceed 600W continuous.
3. Connect device while unit is off, then power on.
4. Monitor LCD for power consumption.

Tip: For sensitive electronics, use pure sine wave AC output.

Charging & Power Management

Supports multiple charging methods.

1. AC Charging: Use included adapter for fastest charge.
2. Solar Charging: Connect compatible solar panel (10-65V).
3. Car Charging: Use 12V car adapter while driving.
4. Dual Input: Combine solar and AC for faster charging.
5. Battery Care: Store at 50-80% charge if not used for extended periods.
6. ECO Mode: Enables auto-shutdown when no load detected.

WARNING! Do not charge in extreme temperatures. Use only approved solar panels.

Safety Features

Overcharge Protection: Stops charging at 100%. Over-discharge Protection: Shuts off at 5% to protect battery. Short Circuit Protection: Automatically cuts power. Temperature Control: Fan activates during high load. Surge Protection: Handles 1200W surge for motor startups.

Care & Maintenance

Keep unit clean and dry. Store in cool, dry place when not in use.

Cleaning: Use dry cloth only; do not use liquids.

Storage: Charge to 50-80% every 3 months if storing long-term.

CAUTION! Do not disassemble; no user-serviceable parts inside.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2023 Ecoflow; all rights reserved. For support, visit www.ecoflow.com or contact 1-800-ECO-FLOW.

Troubleshooting

Reset: Hold power button for 10 seconds to force restart.

Service: 1-800-ECO-FLOW; www.ecoflow.com