Ecoflow EF-Fold-P045-DT Manual

The Ecoflow EF-Fold-P045-DT is a 45-watt portable folding solar panel designed for outdoor and emergency power generation. It features high-efficiency monocrystalline solar cells, a foldable design with integrated kickstand, USB-C and DC outputs, weather-resistant construction, and compatibility with various power stations and devices. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operation Guidelines 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Foldable solar panel with monocrystalline cells, USB-C output port, DC output port, integrated kickstand, carrying handle, and weather-resistant coating.

Feature	Description
Solar Panel Type	High-efficiency monocrystalline silicon
Rated Power Output	45W maximum under ideal conditions
USB-C Output	Up to 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A (45W Max)
DC Output Port	For direct connection to compatible power stations
Foldable Design	Compact storage and easy transport
Integrated Kickstand	Adjustable angle for optimal sun exposure
Carrying Handle	For easy portability
Weather Resistance	IPX4 water-resistant rating
Compatibility	Works with EcoFlow power stations and other USB-C/DC devices
Weight	Approximately 2.2 kg (4.85 lbs)

Installation

Unpack and inspect contents. Ensure all components are present and undamaged.

Choose location: Select an area with direct sunlight, free from shadows.
Unfold panel: Lay panel flat and extend to full size.
Adjust kickstand: Set desired angle (typically 30-60 degrees) facing the sun.
Connect to device: Use appropriate cable (USB-C or DC) to connect to power station or device.

WARNING! Do not install near heat sources or flammable materials. Keep away from children and pets.

First-Time Setup

Position panel for optimal performance.

Orientation: Face panel directly toward the sun (south-facing in northern hemisphere).
Angle adjustment: Use kickstand to tilt panel based on season and latitude.
Connection: Connect USB-C or DC cable to compatible device before exposing to sun.
Monitor output: Check device display or indicator lights to confirm charging.

CAUTION! Avoid touching panel surface during operation; it may become hot.

Specifications

Model: EF-Fold-P045-DT
Maximum Power: 45W
Cell Type: Monocrystalline silicon
Open Circuit Voltage (Voc): 21.6V
Short Circuit Current (Isc): 2.6A
USB-C Output: 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
DC Output: 12-30V, compatible with XT60 connector
Operating Temperature: -10°C to 65°C (14°F to 149°F)
Storage Temperature: -20°C to 45°C (-4°F to 113°F)
Dimensions (Unfolded): 680 x 365 x 15 mm
Dimensions (Folded): 365 x 365 x 40 mm
Weight: 2.2 kg (4.85 lbs)
Weather Resistance: IPX4 (splash-proof)

Controls and Settings

No physical controls; output is automatically regulated based on connected device and sunlight.

Indicators: No LED indicators; check connected device for charging status.

Optimization: Adjust panel angle and orientation for maximum power output. Ensure clean surface and direct sunlight exposure.

Connecting Devices

USB-C: For phones, tablets, laptops, and power banks. DC: For EcoFlow and other compatible power stations.

Ensure panel is not in direct sunlight during connection.
Use manufacturer-provided or certified cables.
Connect cable to device first, then expose panel to sun.
Verify connection: Device should indicate charging.

Tip: For best performance, use short, high-quality cables to minimize power loss.

Operation Guidelines

Designed for outdoor use in sunlight.

Daily use: Unfold, position toward sun, connect device, monitor charging.
Optimal time: 10 AM to 3 PM for maximum solar intensity.
Weather considerations: Output reduces under clouds, rain, or partial shade.
Storage: Fold panel, store in dry, cool place away from direct sunlight.
Transport: Use carrying handle; ensure panel is folded and secured.

WARNING! Do not attempt to disassemble or modify panel. Do not expose to extreme temperatures beyond specifications.

Safety Features

Over-current protection: Automatically limits output to prevent damage. Short-circuit protection: Safeguards against wiring faults. Reverse polarity protection: Prevents damage from incorrect DC connection. Weather resistance: IPX4 rating protects against light splashes.

Care & Cleaning

Disconnect from devices before cleaning. Use soft, dry cloth to wipe surface. For stubborn dirt, use damp cloth with mild soap; avoid abrasive cleaners.

CAUTION! Do not use harsh chemicals, high-pressure water, or sharp objects. Ensure panel is completely dry before storage or use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2023 EcoFlow; trademarks of EcoFlow Tech. For support, visit www.ecoflow.com or contact customer service at 1-800-ECO-FLOW.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No output/power	Insufficient sunlight, poor connection	Reposition panel for direct sun; check cables and connections.
Low charging speed	Shading, dirty panel, angle	Clean panel surface; adjust angle; remove obstructions.
Device not recognized	Incompatible device/cable	Use compatible device and certified cable; try different port.
Panel gets very hot	Normal operation in sun	Ensure ventilation; output may reduce at high temperatures.
DC port not working	Loose connection, fault	Reconnect securely; try different cable if available.

Reset: Disconnect all devices, fold panel, wait 5 minutes, then reconnect.

Service: 1-800-ECO-FLOW; www.ecoflow.com