Delta Dore TYMOOV Solar 5 SO Manual

The Delta Dore TYMOOV Solar 5 SO is a smart solar-powered roller shutter actuator designed for automated control of roller shutters, awnings, or blinds. It integrates with the TYMOOV ecosystem for wireless control via remote, smartphone app, or home automation system. Features include solar panel charging, silent motor operation, adjustable end-of-travel limits, obstacle detection, and integration with weather stations for automatic operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Solar panel, Motor unit, Control box, Mounting brackets, Remote control (optional), TYMOOV Hub connector.

Installation

Unpack and inspect contents. Ensure installation site receives adequate sunlight.

1. Mount the solar panel: Attach to a south-facing surface (in Northern Hemisphere) using provided brackets.
2. Install the motor unit: Secure to the roller shutter shaft using the appropriate adapter.
3. Connect wiring: Link solar panel to motor control box via waterproof connectors.
4. Secure control box: Mount in a protected, dry location near the shutter.
5. Initial power check: Ensure solar panel is exposed to light; LED should blink green.

WARNING! Installation at height requires proper safety equipment. Ensure power is disconnected during wiring. Verify structural integrity of mounting surface.

First-Time Setup

After installation, perform initial configuration.

1. Charge the battery: Expose solar panel to direct sunlight for at least 8 hours before first use.
2. Pair with remote/TYMOOV Hub: Press and hold the pairing button on the control box for 5 seconds until LED flashes rapidly.
3. Set travel limits: Manually run the shutter to fully open and closed positions using the remote to teach the limits.
4. Configure via app: Download TYMOOV app, add device, and assign to a room or group.
5. Test operation: Use remote or app to open and close the shutter, verifying smooth movement and correct limits.

CAUTION! Keep hands clear of moving parts during limit setting. Ensure no obstacles are in the shutter's path.

Specifications

• Motor Type: DC brushless, silent operation.
• Power Supply: Integrated solar panel (6V, 2W), backup battery (Li-ion, 3.7V 2000mAh).
• Communication: 433.92 MHz RF, range up to 100m line-of-sight.
• Load Capacity: Up to 7 kg (15.4 lbs) for standard roller shutters.
• Travel Speed: Adjustable, typical 14 mm/s.
• Operating Temperature: -10°C to +50°C (14°F to 122°F).
• Protection Rating: IP44 for outdoor components.
• Dimensions (Motor Unit): 150 x 60 x 45 mm.
• Compatibility: TYMOOV Hub, TYMOOV App (iOS/Android).
• Warranty: 2 years.

Controls and Settings

Control via physical buttons on unit, included remote, or TYMOOV app.

Control Box Buttons: Pairing button, Manual override (Up/Stop/Down).

Remote: Open, Close, Stop, Favorite position, Pairing.

App Settings (TYMOOV): - Travel Limits: Set precise open/close percentages. - Speed: Adjust opening/closing speed. - Obstacle Sensitivity: Low/Medium/High. - Auto Modes: Schedule-based or light-sensor triggered. - Grouping: Control multiple shutters simultaneously. - Weather Reaction: Link to wind/rain/sun sensors for automatic retraction or deployment.

Connecting to TYMOOV Hub

For full smart home integration and remote access.

1. Ensure TYMOOV Hub is powered on and connected to your home Wi-Fi.
2. In the TYMOOV app, go to Devices > Add Device.
3. Select "Solar Shutter Actuator" from the list.
4. Press the pairing button on the actuator's control box until the LED flashes.
5. Follow in-app instructions to complete pairing and assign a name/location.
6. Test connectivity by operating the shutter from the app.

Tip: Place the TYMOOV Hub centrally to ensure strong RF signal to all devices.

Programming and Automation

Create schedules, scenes, and weather-based rules.

1. Schedules: Set specific times for open/close (e.g., open at sunrise, close at sunset).
2. Scenes: Create "Home", "Away", or "Night" scenes that set all connected shutters to predefined positions.
3. Weather Rules: If connected to a TYMOOV weather station, automatically close shutters when wind speed exceeds a set threshold or retract awnings in case of rain.
4. Sun Tracking: Adjust awning position based on sun angle to optimize shade.
5. Voice Control: Integrate with Amazon Alexa or Google Assistant via the TYMOOV Hub.

WARNING! Regularly test automatic functions to ensure they operate as intended, especially safety-related weather reactions.

Maintenance & Care

Minimal maintenance required due to sealed design.

• Solar Panel: Clean surface every 3-6 months with a soft, damp cloth to maintain efficiency.
• Mechanical Parts: Annually check mounting brackets and shaft connection for tightness.
• Battery: The internal battery is maintenance-free. If backup performance declines significantly after several years, contact support for evaluation.
• Software: Keep TYMOOV Hub and app updated for latest features and security.

CAUTION! Do not use abrasive cleaners or high-pressure water on the solar panel or control box. Disable automatic functions before performing any maintenance on the shutter itself.

Regulatory Information

This device complies with: - RED Directive 2014/53/EU. - EMC Directive 2014/30/EU. - RoHS Directive 2011/65/EU. - Waste Electrical and Electronic Equipment (WEEE) Directive. The 433.92 MHz frequency band is subject to regional regulations. For EU: Maximum RF output power <10mW. Delta Dore is a registered trademark. Copyright © Delta Dore S.A.S. For support, visit www.deltadore.com or contact your local distributor.

Troubleshooting

Reset: Press and hold pairing button for 15 seconds until LED flashes rapidly 3 times (resets to factory defaults, except travel limits).

Service: Do not open the unit. For technical support, visit www.deltadore.com/support or contact your installer.