Click SSLW180 Instruction Manual

The Click SSLW180 is a versatile 18-inch LED security light with motion sensor, weather-resistant construction, adjustable detection range, three lighting modes, dusk-to-dawn operation, and energy-efficient LED technology. Designed for outdoor security and area lighting, it features a sturdy mounting bracket, adjustable head, and easy installation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting to Power 7. Operating Modes 8. Maintenance 9. Regulatory Information 10. Troubleshooting

Features at a Glance

Key components: LED light panel with motion sensor, adjustable mounting bracket, weather-resistant housing, control dials, and power cable.

Feature	Description
Motion Sensor	PIR sensor with adjustable range (up to 180° / 40 feet)
Lighting Modes	Auto (Motion), Dusk-to-Dawn, Manual On/Off
LED Panel	18-inch, 1800 lumens, 5000K daylight color
Detection Angle	Adjustable 180° horizontal, 120° vertical
Weather Rating	IP65 waterproof and dustproof
Mounting Bracket	Adjustable for wall or eave mounting
Time Control	Adjustable duration (5 sec to 30 min)
Sensitivity Control	Adjustable motion detection sensitivity
Lux Control	Adjustable ambient light threshold
Power Input	120V AC, 60Hz

Installation

Unpack and inspect contents. Ensure mounting surface is stable and can support light weight.

Choose location: Select area with clear detection path, away from heat sources.
Mount bracket: Use provided screws to secure bracket to wall or eave.
Attach light: Secure light to bracket, adjust angle for desired coverage.
Connect wiring: Follow local electrical codes; connect black (hot), white (neutral), green (ground).
Secure connections: Use weatherproof wire connectors for outdoor safety.

WARNING! Turn off power at circuit breaker before installation. Use appropriate safety gear.

First-Time Setup

After installation, restore power and configure settings.

Set mode: Rotate MODE dial to desired setting (AUTO, DUSK-to-DAWN, ON).
Adjust sensitivity: Use SENS dial to set motion detection range.
Set time: Use TIME dial to set how long light stays on after detection.
Adjust lux: Use LUX dial to set ambient light level for activation.
Test operation: Walk through detection zone to verify activation.

CAUTION! Do not look directly at LED light at close range. Ensure all connections are dry.

Specifications

Model: SSLW180
Light Source: LED, 1800 lumens
Color Temperature: 5000K (Daylight)
Power Consumption: 20W
Input Voltage: 120V AC, 60Hz
Detection Range: Up to 40 feet, 180° angle
Time Settings: 5 seconds to 30 minutes
Operating Temperature: -4°F to 122°F (-20°C to 50°C)
Housing Material: ABS plastic, aluminum
Dimensions: 18" x 8" x 5"
Weight: 4.4 lbs (2 kg)

Controls and Settings

Three control dials located on bottom of unit.

MODE Dial: AUTO (motion-activated), DUSK-to-DAWN (on at dusk, off at dawn), ON (constant on).

TIME Dial: Adjusts duration light stays on after motion detection (5 sec, 1 min, 5 min, 10 min, 30 min).

SENS Dial: Adjusts motion detection sensitivity (Min to Max).

LUX Dial: Adjusts ambient light level at which light activates (Min for dark areas, Max for brighter areas).

Connecting to Power

Connect to standard 120V household electrical supply.

Turn off power at circuit breaker.
Connect black wire to hot (black) supply wire.
Connect white wire to neutral (white) supply wire.
Connect green wire to ground (green or bare) wire.
Secure with wire nuts, wrap with electrical tape.
Restore power and test.

Tip: Use weatherproof junction box for outdoor connections.

Operating Modes

Three operating modes for different lighting needs.

AUTO Mode: Light activates only when motion is detected within set parameters.
DUSK-to-DAWN Mode: Light turns on automatically at dusk and off at dawn, regardless of motion.
ON Mode: Light remains on continuously until mode is changed.
Test Mode: Some models include test button to verify sensor operation without waiting for motion.

WARNING! Do not install where constant switching may cause nuisance to neighbors.

Maintenance

Regular maintenance ensures optimal performance.

Clean lens and sensor surface every 3-6 months with soft, dry cloth.
Check mounting hardware annually for tightness.
Inspect wiring connections for corrosion or damage.
Clear debris, spider webs, or obstructions from sensor area.

CAUTION! Turn off power before cleaning. Do not use abrasive cleaners or water spray.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL Listed for outdoor wet locations. Copyright © 2025 Click Lighting; all rights reserved. For support, visit www.clicklighting.com or contact 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Light does not turn on	Power supply, mode setting	Check circuit breaker; verify mode is not OFF; test with ON mode.
Motion sensor not working	Obstructions, sensitivity setting	Clear sensor area; adjust SENS dial to higher setting; check detection range.
Light stays on constantly	Mode setting, lux setting	Set mode to AUTO; adjust LUX dial to appropriate level.
Short activation time	Time setting	Adjust TIME dial to longer duration.
False triggering	High sensitivity, environmental factors	Reduce SENS setting; relocate away from heat sources or moving vegetation.
Dim light output	LED failure, power issue	Check power supply; contact support if LEDs are failing.

Reset: Turn power off for 30 seconds, then restore.

Service: 1-800-555-0199; www.clicklighting.com