The Clas Ohlson SY-S120W is a portable, rechargeable Bluetooth speaker with 12W output, built-in microphone for hands-free calls, IPX5 water resistance, up to 8 hours of playtime, and support for Bluetooth 5.0 connectivity. It features a durable design, integrated controls, and a USB-C charging port. Below are key sections for safety, features, setup, operation, and troubleshooting.
Key components: Speaker unit, control panel, USB-C charging port, microphone, LED indicators.
| Feature | Description |
|---|---|
| Bluetooth 5.0 | Wireless audio streaming with stable connection |
| 12W Output Power | Clear and powerful sound |
| IPX5 Water Resistance | Protected against water jets; suitable for outdoor use |
| Built-in Microphone | For hands-free phone calls |
| Rechargeable Battery | Up to 8 hours of playtime |
| USB-C Charging | Modern charging port for quick recharging |
| Multi-function Button | Controls power, pairing, calls, and playback |
| Volume Buttons | Adjust volume up/down |
| LED Indicator | Shows power, pairing, and battery status |
| 3.5mm AUX Input | For wired audio connection |
Unpack and verify all items are present.
NOTE! If any item is missing or damaged, contact customer support immediately.
Before first use, fully charge the speaker.
CAUTION! Use only the provided cable or a certified USB-C cable. Do not expose the charging port to liquids.
Access all functions via the control panel on the top of the speaker.
Power/Multi-function Button: Press and hold 2 seconds to turn on/off. Press once to play/pause music or answer/end calls. Press and hold in standby to enter pairing mode.
Volume Up/Down Buttons: Adjust volume. Press and hold to skip tracks (next/previous).
LED Indicator: Solid blue (power on, connected). Flashing blue (pairing mode). Solid red (charging). Off (fully charged or powered off).
Pair with your smartphone, tablet, or computer.
Tip: The speaker remembers the last paired device and will reconnect automatically when powered on.
Supports wireless Bluetooth streaming and wired AUX input.
WARNING! Do not use at extremely high volumes for extended periods to avoid hearing damage.
Make and receive calls directly through the speaker.
When a call comes in: Press the Multi-function button once to answer. Press again to end the call. Press and hold to reject the call. During a call, press Volume Up/Down to adjust call volume.
NOTE: Ensure your phone is paired and within range for clear call quality.
Unplug charging cable before cleaning. Wipe exterior with a soft, dry cloth. For stubborn dirt, use a cloth slightly dampened with water. Do not submerge in water.
CAUTION! Do not use abrasive cleaners, solvents, or chemicals. Keep away from extreme heat and direct sunlight for prolonged periods.
This device complies with relevant CE, RoHS, and WEEE directives. Bluetooth® is a registered trademark of Bluetooth SIG, Inc. Copyright © Clas Ohlson. For support, visit www.clasohlson.com or contact customer service as per your region.
| Symptom | Possible Cause | Corrective Action |
|---|---|---|
| Speaker won't turn on | Battery depleted | Charge the speaker for at least 30 minutes before use. |
| Cannot pair with device | Bluetooth not enabled/out of range | Enable Bluetooth on device; move within 10 meters; reset speaker (hold power 10 sec). |
| No sound from speaker | Volume low/not connected/muted | Increase volume on speaker and device; ensure correct audio source is selected. |
| Poor audio quality | Interference/low battery | Move away from other wireless devices; charge the speaker. |
| Short battery life | High volume/old battery | Use at moderate volume; battery may need replacement after prolonged use. |
Reset: Turn off speaker, then press and hold Power and Volume Up buttons together for 10 seconds to reset to factory settings.
Service: Refer to warranty card or visit www.clasohlson.com for support.