Clas Ohlson 36-8127 Manual

The Clas Ohlson 36-8127 is a versatile multi-function device designed for home and workshop use. It features multiple power settings, safety interlocks, ergonomic handles, and compatibility with standard accessories. Powered by a 230V AC mains supply, it includes overload protection, variable speed control, and a collection bag for debris management. Below are key sections covering safety instructions, product overview, setup, operation, maintenance, and troubleshooting.

Product Overview & Features

Key components: Main unit with motor housing, ergonomic front handle, power cord, safety key, dust collection port, and adjustable base.

Safety Instructions

Read all instructions before use. Keep manual for future reference.

1. Always insert the safety key before plugging in the device.
2. Ensure the work area is clean, dry, and well-lit.
3. Wear appropriate personal protective equipment (safety glasses, gloves).
4. Do not operate with damaged cord or if unit has been dropped.
5. Disconnect from power before changing accessories or performing maintenance.

WARNING! Risk of electric shock. Do not expose to rain or moisture. Do not use outdoors unless specified.

Unpacking & Contents

Carefully unpack the carton and verify all items are present.

1. Main Unit (36-8127)
2. Standard Accessory Head (as per model)
3. Safety Key (red)
4. Collection Bag with adapter
5. Hex Key (for adjustments)
6. User Manual (this document)

CAUTION! Inspect for shipping damage. Report any missing or damaged parts to retailer immediately. Do not discard packaging until assembly is complete.

Technical Specifications

• Model Number: 36-8127
• Power Supply: 230V AC, 50Hz
• Power Consumption: 1200W
• Noise Level: < 85 dB(A)
• Speed Settings: 6 variable levels
• Weight: 5.2 kg
• Dimensions (LxWxH): 350 x 250 x 300 mm
• Cable Length: 1.8 meters
• Protection Class: II (double insulated)
• Operating Temperature: 5°C to 40°C

Assembly & Installation

Assemble on a flat, stable surface. Ensure power is disconnected.

1. Attach the base: Align feet with slots and press until they click.
2. Insert safety key: Push fully into the slot near the power switch.
3. Attach collection bag: Slide adapter onto dust port and twist to lock.
4. Install accessory head: Align with drive shaft, push in, and turn locking collar clockwise.
5. Adjust height/angle if applicable using the provided hex key.

Tip: Perform a dry run without power to ensure all parts move freely.

Operating Instructions

Basic operation steps for standard use.

1. Place unit on a stable surface near a power outlet.
2. Ensure safety key is inserted and accessory is securely attached.
3. Plug power cord into a grounded 230V outlet.
4. Turn the speed dial to the lowest setting (1).
5. Flip the power switch to ON (I). The unit will start.
6. Adjust speed as needed using the dial.
7. To stop, flip power switch to OFF (O) and unplug.
8. Remove safety key when not in use.

WARNING! Never leave the device unattended while powered on. Keep hands away from moving parts.

Function Modes & Settings

The device offers several operational modes controlled via the speed dial and accessory heads.

Speed Settings: 1 (Low) for delicate work, 3-4 (Medium) for general purpose, 6 (High) for intensive tasks.

Accessory Modes: Different heads enable sanding, polishing, cutting, or brushing functions. Refer to accessory-specific guides.

Overload Protection: If the red LED lights up, immediately turn off, unplug, and allow to cool for 15 minutes. Reduce load or speed before restarting.

Care, Cleaning & Storage

Regular maintenance ensures longevity and safe operation.

1. Unplug and remove safety key before any cleaning.
2. Wipe exterior with a soft, slightly damp cloth. Do not immerse.
3. Empty and clean the collection bag after each use.
4. Check air vents for dust blockage; use a soft brush to clear.
5. Lubricate moving parts as specified (if applicable) with light machine oil.
6. Store in a dry, cool place, preferably in original packaging.

CAUTION! Do not use solvents, abrasives, or compressed air for cleaning. Never wash any part under running water.

Accessories & Compatibility

The unit is compatible with a range of official Clas Ohlson accessories (sold separately).

• Sanding Head (Ref: 36-8150)
• Polishing Pad (Ref: 36-8151)
• Cutting Wheel Guard & Blade Set (Ref: 36-8152)
• Wire Brush Set (Ref: 36-8153)
• Extended Hose for Dust Extraction (Ref: 36-8154)

Note: Using non-approved accessories may void the warranty and cause unsafe operation.

Warranty Information

Clas Ohlson warrants this product against defects in materials and workmanship for a period of two (2) years from the date of original retail purchase. This warranty is valid only with proof of purchase (receipt). It covers repair or replacement at Clas Ohlson's discretion. The warranty does not cover damage from misuse, accidents, unauthorized modifications, commercial use, or normal wear and tear. For warranty service, contact the Clas Ohlson customer service department or return to the place of purchase.

Troubleshooting Guide

For Service: Do not attempt to repair the unit yourself. Contact Clas Ohlson Customer Support or an authorized service center.

Support: Visit www.clasohlson.com or call +46 (0)771 23 23 23.