Bright SMART 027961 Operating Instructions Manual

The Bright SMART 027961 is a versatile smart device designed for home automation and control, featuring wireless connectivity, multi-protocol support, programmable routines, voice assistant compatibility, energy monitoring, and remote access via a dedicated mobile application. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Central Control Hub, Power Adapter, Remote Control, Antenna, Ethernet Port, USB Configuration Port, Status LED Indicators.

Installation

Unpack and inspect contents. Place on stable surface away from heat sources and metal obstructions.

1. Position the hub: Place centrally for optimal wireless range, at least 1 meter from routers or microwaves.
2. Connect to power: Plug the 12V DC adapter into the hub and then into a wall outlet.
3. Connect to network: Use Ethernet cable for wired connection or proceed to wireless setup.
4. Install antennas: Screw antennas clockwise until snug for best signal.

WARNING! Use only the provided power adapter. Ensure proper ventilation around the device.

First-Time Setup

Power on the hub; LED will blink blue. Follow app-guided setup.

1. Download the Bright SMART App from Apple App Store or Google Play Store.
2. Create an account or log in to your existing Bright account.
3. Press and hold the hub's Pairing button for 3 seconds until LED flashes rapidly.
4. In the app, tap "Add Device" and select "SMART Hub 027961". Follow on-screen instructions to connect to your Wi-Fi network.
5. Name your hub and assign it to a room within the app.

CAUTION! Keep the hub away from water and extreme temperatures during setup.

Specifications

• Model: Bright SMART 027961.
• Wireless Protocols: Wi-Fi 802.11 a/b/g/n/ac, Bluetooth 5.0, Zigbee 3.0, Z-Wave 800 Series.
• Ports: 1x Gigabit Ethernet, 1x USB 2.0 Type-B, DC Power Jack.
• Power Supply: Input: 100-240V AC, 50/60Hz; Output: 12V DC, 2A.
• Operating Temperature: 0°C to 40°C (32°F to 104°F).
• Supported Devices: Up to 100 smart devices (lights, plugs, sensors, locks).
• Security: WPA3 encryption, automatic firmware updates.
• Dimensions: 120mm x 120mm x 35mm.
• Weight: 250g.

Controls and Settings

Access settings via the Bright SMART App or the physical buttons on the hub.

Hub Buttons: Power, Pairing/Reset, LED Indicator Toggle.

App Controls: Dashboard (device status), Rooms (group devices), Automation (create routines), Energy (monitor usage), Settings (network, notifications, updates).

Settings Menu: Network Configuration, Device Management, Automation Rules, User Accounts, Notifications, Firmware Update, Factory Reset.

Connecting Devices

Add compatible smart devices (lights, switches, sensors) to your hub.

1. Ensure the device is in pairing mode (refer to its manual).
2. In the Bright SMART App, go to Devices > Add Device.
3. Select the device type from the list or scan its QR code.
4. Follow in-app instructions to complete pairing. The device will appear in your dashboard.
5. Assign the device to a room and create custom names (e.g., "Living Room Lamp").

Tip: For best results, add devices one at a time and within 10 meters of the hub.

Using Smart Features

Create automations, use voice control, and monitor energy.

1. Create a Routine: In the Automation tab, tap "Create Routine". Set triggers (time, sensor, button press) and actions (turn on light, adjust thermostat).
2. Voice Control: Link your Bright account to Alexa, Google Assistant, or HomeKit. Use commands like "Alexa, turn on the kitchen light."
3. Energy Monitoring: View real-time and historical power usage for connected smart plugs in the Energy tab.
4. Away Mode: Enable in Settings to randomly turn lights on/off to simulate presence when you're away.
5. Guest Access: Generate temporary access codes in the app for guests.

WARNING! Do not create automations that control critical safety devices without manual override.

Accessibility Features

Voice Control: Full device control via supported voice assistants for hands-free operation. High-Contrast Mode: Available in app settings for improved visibility. Audible Alerts: Enable sound notifications for device status changes.

Care & Cleaning

Unplug the hub before cleaning. Use a soft, dry, lint-free cloth. Do not use liquids, sprays, or abrasive cleaners.

CAUTION! Avoid getting moisture into any openings. Keep the device and power adapter away from direct heat sources.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. ICES-003 Compliance: Class B digital apparatus. Copyright © 2025 Bright Smart Technologies. All rights reserved. For support, visit www.brightsmart.com/support or contact 1-800-555-0279.

Troubleshooting

Reset: Press and hold the Reset button for 10 seconds until all LEDs flash to restore factory settings.

Service: 1-800-555-0279; www.brightsmart.com/support