Bougerv ISE137 User Manual

The Bougerv ISE137 is a high-performance, energy-efficient portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. It features a large capacity lithium-ion battery, multiple output ports (AC, DC, USB), pure sine wave inverter technology, MPPT solar charging capability, LCD display for real-time monitoring, and robust safety protections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Solar Input 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-capacity lithium-ion battery pack, Pure Sine Wave AC Inverter, MPPT Solar Charge Controller, LCD Information Display, Multiple output ports, Carrying handle.

Feature	Description
AC Output Ports	Pure sine wave AC outlets for sensitive electronics
DC Output Ports	12V carport and 5.5mm DC outputs
USB Ports	USB-A and USB-C with fast charging capability
Solar Input Port	For connecting solar panels (MPPT technology)
AC Input Port	For wall charging from mains power
Car Input Port	For charging from a 12V vehicle outlet
LCD Display	Shows battery level, input/output power, and status
Power Button	Turns unit on/off
DC Output Button	Enables/disables DC outputs
AC Output Button	Enables/disables AC inverter

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect the included AC adapter to the AC INPUT port and a wall outlet to fully charge the unit before first use.
Positioning: Ensure unit is placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
Connecting Loads: Connect devices to appropriate output ports (AC, DC, USB). Do not exceed the maximum output power.
Solar Panel Connection (Optional): Connect compatible solar panel to the SOLAR INPUT port using the provided cable.

WARNING! Unit is heavy; lift with care using the handle. Ensure all connections are secure and dry.

First-Time Setup

Power on the unit; observe LCD display.

Initial Charge: Fully charge via AC wall outlet. LCD will show charging progress.
LCD Familiarization: Note battery percentage, input/output wattage, and estimated runtime.
Output Configuration: Press AC and DC buttons to enable the desired outputs before connecting devices.
Test Operation: Connect a small device (e.g., phone charger) to verify output functionality.

CAUTION! Do not connect high-wattage appliances exceeding the unit's rated capacity. Check device power requirements first.

Specifications

Battery Capacity: 1372Wh Lithium-ion.
AC Output: 1500W (3000W Surge), Pure Sine Wave, 120V 60Hz.
DC Output: 12V/10A (Car Port), 12V/5A (5.5mm Port).
USB Output: USB-A: 5V/2.4A, USB-C: 100W PD.
Solar Input: 11-60V DC, 500W Max, MPPT.
AC Charging Input: 120V AC, 60Hz.
Car Charging Input: 12V/24V DC.
Display: LCD with battery level, I/O power, temperature.
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

All controls are located on the front panel. LCD Display shows real-time data.

Front Panel: POWER Button, AC Output Button, DC Output Button, LCD Display.

LCD Information: Battery percentage, Input/Output power (Watts), Estimated runtime, Temperature warning. Settings: The unit operates automatically. Use the AC/DC buttons to enable or disable the corresponding output banks. The BMS (Battery Management System) automatically manages charging, discharging, and safety protections.

Connecting Devices

AC Devices: Plug into AC outlets. DC Devices: Use 12V carport or 5.5mm DC port. USB Devices: Use USB-A or USB-C ports.

Ensure the unit is powered ON.
Press the AC OUTPUT button to enable AC power (icon lights up).
Press the DC OUTPUT button to enable DC power (icon lights up).
Connect your device to the appropriate port. The LCD will update to show output power.
For solar charging, connect the solar panel to the SOLAR INPUT port. The LCD will show input power.

Tip: Start the unit (enable AC/DC) before connecting high-power devices to avoid inrush current issues.

Charging & Solar Input

Supports charging via AC wall outlet, 12V car outlet, or solar panels.

AC Charging: Connect the provided AC adapter. Charging time varies based on remaining capacity.
Car Charging: Connect the 12V car charger cable to the CAR INPUT port while vehicle is running.
Solar Charging: Connect compatible solar panel(s) to the SOLAR INPUT port. MPPT controller optimizes efficiency.
Monitoring: LCD displays input power (Watts) and estimated time to full charge.
Battery Care: For longevity, avoid frequently draining the battery to 0%. Recharge when possible.

WARNING! Use only Bougerv-approved or compatible solar panels and cables. Do not exceed max solar input voltage (60V).

Safety Features

Built-in Battery Management System (BMS) provides: Over-charge Protection, Over-discharge Protection, Over-current Protection, Short Circuit Protection, Over-temperature Protection. The pure sine wave inverter protects sensitive electronics. The unit will automatically shut down output if a fault is detected.

Care & Maintenance

Store in a cool, dry place. Keep terminals clean and dry. If storing for more than 3 months, charge to approximately 50-60% capacity.

CAUTION! Do not disassemble the unit. Do not expose to fire or water. If the case is damaged, discontinue use immediately.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. Copyright © 2025 Bougerv; trademarks of Bougerv. For support, visit www.bougerv.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit will not turn on	Battery depleted	Connect to AC power for charging. Allow a few minutes before pressing POWER.
No AC output	AC output disabled/overload	Press AC OUTPUT button. Check if connected device exceeds 1500W. Disconnect device, reset unit.
Not charging from solar	Insufficient sunlight/connection	Ensure solar panel is in direct sunlight. Check all cable connections are secure.
LCD display is dim/off	Eco-mode/backlight timeout	Press any button to wake display. Check settings for display timeout.
Unit shuts down unexpectedly	Overload/overheating	Disconnect all devices. Allow unit to cool in a ventilated area. Reconnect devices one by one without exceeding total wattage.

Reset: Turn unit OFF, disconnect all inputs and outputs, wait 60 seconds, then turn ON.

Service: [email protected]; www.bougerv.com