Bougerv BJ100W-B016 User Manual

The Bougerv BJ100W-B016 is a 100W portable power station designed for outdoor adventures, emergency backup, and off-grid power needs. It features a high-capacity lithium battery, multiple output ports (AC, DC, USB), pure sine wave inverter technology, LCD display for monitoring, solar charging capability, and built-in safety protections. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging the Power Station 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable power station with lithium battery, LCD display, AC outlets, DC ports, USB ports, solar charging input, and carrying handle.

Feature	Description
AC Output	Pure sine wave 100W output for sensitive electronics
DC Output	12V/10A carport for DC-powered devices
USB Ports	USB-A and USB-C ports for charging phones, tablets
LCD Display	Shows battery level, input/output wattage, and status
Solar Charging Input	MC4 connector for solar panel charging (max 100W)
Wall Charging	AC adapter for fast charging from wall outlet
Car Charging	12V car charger for on-the-go charging
Battery Type	Lithium-ion with BMS protection
Carrying Handle	Integrated handle for easy portability
Cooling Fan	Built-in fan for temperature management

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to power station and wall outlet for full charge.
Solar Panel Setup: Connect compatible solar panel to MC4 input port (sold separately).
Device Connection: Plug devices into appropriate output ports (AC, DC, USB).
Positioning: Ensure unit is in well-ventilated area, away from heat and moisture.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; monitor LCD display.

Charge Fully: Before first use, charge to 100% via AC wall charger.
LCD Familiarization: Check battery level, input/output indicators on display.
Output Selection: Press power button for AC output; use DC/USB ports as needed.
Solar Charging: Connect solar panel in direct sunlight for optimal charging.

CAUTION! Use only Bougerv-approved accessories. Do not disassemble unit.

Specifications

Battery Capacity: 100Wh (Lithium-ion).
AC Output: 100W pure sine wave, 110V/60Hz.
DC Output: 12V/10A (max 120W).
USB Output: USB-A: 5V/2.4A; USB-C: 18W PD.
Input: Solar: 12-24V/100W max; AC: 110V/60Hz; Car: 12V/10A.
Display: LCD showing battery %, wattage, temperature.
Protections: Overload, over-temperature, short-circuit, low-voltage.
Weight: Approximately 2.5 lbs (1.13 kg).
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Front Panel: POWER button (AC output), LCD display, USB ports, DC port. Side/Rear: Solar input, AC input, cooling vents.

LCD Indicators: Battery percentage, input power, output power, warning icons (overload, high temp).

AC Output: Press POWER button to enable/disable pure sine wave AC output. DC Output: Automatically active when device plugged in. USB Output: Always on when unit powered. Charging: Plug in AC, solar, or car charger; LCD shows charging status and estimated time.

Connecting Devices

AC Devices: Plug into AC outlets (max 100W total). DC Devices: Use 12V carport for coolers, air pumps. USB Devices: Connect phones, tablets, lights to USB-A/USB-C.

Check device power requirements (watts/amps).
Ensure total load does not exceed 100W for AC, 120W for DC.
Connect device cable to appropriate port.
Enable AC output by pressing POWER button if needed.

Tip: Start with highest power device first to avoid overload.

Charging the Power Station

Supports AC wall charging, solar charging, and 12V car charging.

AC Charging: Use included adapter; plug into wall outlet and unit's AC input.
Solar Charging: Connect solar panel to MC4 input; place panel in direct sunlight.
Car Charging: Use 12V car charger cable; plug into vehicle's 12V outlet.
Charging Status: LCD shows battery percentage, input wattage, and estimated time.
Full Charge: Unit stops charging automatically at 100%; unplug charger.

WARNING! Use only recommended solar panels. Do not charge in extreme heat.

Safety Features

Battery Management System (BMS): Protects against overcharge, over-discharge, short circuit, and overheating. Automatic Shutdown: Turns off output if overload or high temperature detected. Cooling Fan: Activates during high load or charging to maintain temperature.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth; do not use liquids. Recharge every 3-6 months if storing long-term.

CAUTION! Do not puncture or modify battery. Dispose of properly per local regulations.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE, RoHS compliant. Copyright © 2025 Bougerv; trademarks of Bougerv Inc. For support, visit www.bougerv.com or contact [email protected].

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Battery depleted/overload	Recharge unit; reduce connected load; check POWER button.
Not charging	Faulty cable/source	Check connections; try different AC outlet/solar panel.
Overload warning	Connected devices exceed limit	Disconnect devices; restart with lower total wattage.
High temperature warning	Overheating	Move to cooler area; ensure vents unobstructed; let cool.
LCD not displaying	Battery deeply discharged	Charge for 30+ minutes; if no change, contact support.

Reset: Disconnect all devices, turn off, recharge fully, then restart.

Service: [email protected]; www.bougerv.com