Boly BC-02 User Manual

The Boly BC-02 is a compact Bluetooth speaker with high-fidelity audio, built-in microphone for hands-free calls, IPX5 water resistance, 12-hour battery life, and support for Bluetooth 5.0 connectivity. It features intuitive touch controls, voice assistant integration, and a durable, portable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Bluetooth speaker unit, Micro-USB charging cable, User manual, Warranty card.

Installation

Unpack and inspect contents. Place on stable, dry surface.

1. Charge the speaker: Connect the Micro-USB cable to the port and a power source.
2. Power on: Press and hold the Power button until the LED lights up.
3. Initial placement: Ensure the speaker is on a flat surface for optimal sound.

WARNING! Do not expose to extreme temperatures. Keep away from water beyond IPX5 rating.

First-Time Setup

Power on speaker; follow pairing prompts.

1. Enable Bluetooth on your device: Go to Bluetooth settings on phone/tablet.
2. Pair with speaker: Press Bluetooth Pairing button; select "Boly BC-02" from device list.
3. Confirm connection: LED will stop blinking and remain solid.
4. Adjust volume: Use touch controls or device volume.

CAUTION! Ensure speaker is fully charged before first use for optimal performance.

Specifications

• Dimensions: 150mm x 60mm x 50mm.
• Bluetooth Version: 5.0.
• Battery: 2000mAh lithium-ion, 12 hours playback.
• Charging Time: 3 hours via Micro-USB.
• Water Resistance: IPX5 rated.
• Frequency Response: 80Hz - 20kHz.
• Output Power: 10W RMS.
• Supported Profiles: A2DP, AVRCP, HFP, HSP.
• Operating Range: Up to 10 meters (33 feet).
• Weight: 350g.

Controls and Settings

Access functions via touch controls on top panel.

Touch Controls: Power (press and hold), Volume Up/Down (tap), Play/Pause (single tap), Next/Previous Track (double tap left/right), Bluetooth Pairing (press button), Voice Assistant (press and hold center).

LED Indicators: Solid blue (power on), Blinking blue (pairing mode), Solid red (charging), Off (fully charged/low battery). No software settings menu; all controls are physical/touch.

Connecting Devices

Bluetooth: Primary wireless connection. Auxiliary: Not supported (Bluetooth only).

1. Turn on speaker and enable Bluetooth on source device.
2. Enter pairing mode on speaker if not already connected.
3. Select "Boly BC-02" from available devices list.
4. Audio will automatically route to speaker once connected.

Tip: For best audio quality, ensure device is within 10 meters without obstructions.

Playing Audio

Supports music streaming, podcasts, audiobooks, and hands-free calls.

1. Play audio: Start playback on your connected device.
2. Control playback: Use touch controls on speaker or device.
3. Answer calls: Single tap Play/Pause button to answer; tap again to end.
4. Voice assistant: Press and hold center button to activate Siri/Google Assistant.
5. Battery check: LED flashes red when battery is low (below 15%).

WARNING! Do not use while charging if near water. Keep away from heat sources.

Accessibility Features

Voice Assistant: Enables voice control for visually impaired users. Simple Touch Controls: Large, tactile buttons for easy operation. No screen required for basic functions.

Care & Cleaning

Power off and disconnect from charger before cleaning. Use a soft, dry cloth. For stubborn dirt, use a cloth slightly dampened with water.

CAUTION! Do not use chemicals, solvents, or abrasives. Do not submerge in water despite IPX5 rating.

Regulatory Information

FCC ID: 2AAZZ-BC02. This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that this device does not cause harmful interference. IC: 12345A-BC02. Contains FCC ID: 2AAZZ-BC02. For support, visit www.bolyaudio.com or contact 1-800-555-0199.

Troubleshooting

Reset: Press and hold Power and Pairing buttons together for 10 seconds to factory reset.

Service: 1-800-555-0199; www.bolyaudio.com