Blue Wave FlowXtreme NS1002 Manual

The Blue Wave FlowXtreme NS1002 is a high-performance, portable water flow meter designed for professional and residential use. It features a digital LCD display, real-time flow rate and total volume measurement, durable construction with IP67 waterproof rating, data logging capabilities, rechargeable battery, and multiple unit options (GPM, LPM, m³/h). Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Data Logging & Export 8. Calibration 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Digital Flow Sensor, LCD Display with backlight, Control Buttons, USB-C Charging Port, Data Output Port, Mounting Bracket.

Feature	Description
Digital Flow Sensor	High-accuracy turbine sensor for precise flow measurement
LCD Display	Shows real-time flow rate, total volume, battery level, and unit
Control Buttons	Power, Mode, Reset, and Unit selection
USB-C Charging Port	For recharging internal lithium-ion battery
Data Output Port	For connecting to PC or data logger (RS-232 compatible)
Mounting Bracket	Adjustable bracket for secure installation on pipes
POWER	Turns device on/off
MODE	Cycles through display modes (Flow Rate, Total Volume, Settings)
RESET	Resets total volume counter to zero
UNIT	Switches between measurement units (GPM, LPM, m³/h)

Installation

Unpack and inspect contents. Ensure proper pipe compatibility.

Select installation point: Choose straight section of pipe (minimum 5x pipe diameter from bends/valves).
Mount sensor: Attach mounting bracket securely; insert sensor into pipe port (ensure O-ring is seated).
Connect display unit: Attach cable from sensor to display unit; secure connections.
Power on: Charge device fully before first use; press POWER button.

WARNING! Ensure pipe is depressurized before installation. Use proper tools to avoid injury.

First-Time Setup

Power on device; follow initial setup prompts.

Set measurement units: Press UNIT button to select preferred unit (GPM default).
Calibrate sensor: Use auto-calibration feature (hold MODE for 5 seconds in setup mode).
Configure data logging: Access settings menu to enable/disable logging interval.
Adjust display: Set backlight timeout and contrast in display settings.

CAUTION! Do not expose electronics to water during setup. Keep display unit dry.

Specifications

Flow Range: 0.5 to 50 GPM (1.9 to 189 LPM).
Accuracy: ±1.5% of reading.
Display: 2.4-inch LCD with backlight.
Power: Rechargeable 3.7V Li-ion battery (up to 72 hours operation).
Connectivity: USB-C charging, RS-232 data output.
Enclosure Rating: IP67 waterproof (sensor), IP54 (display unit).
Operating Temp: 32°F to 122°F (0°C to 50°C).
Materials: Sensor: Brass; Housing: ABS plastic.

Controls and Settings

Access menu via MODE button. Front Panel: POWER, MODE, RESET, UNIT.

Display Modes: Real-time Flow Rate, Total Volume, Battery Status, Settings Menu.

Settings: Unit selection, Backlight timeout (15s, 30s, 60s, Off), Logging interval (1s to 1h), Calibration reset, Factory reset. Data: Hold MODE for 3 seconds to enter data view mode; scroll through logged points.

Connecting Devices

PC Connection: Use provided USB-to-RS232 cable. Data Logger: Connect via data output port.

Turn off device before connecting cables.
Connect USB cable to PC and data port on device.
Install driver software (included on CD or download).
Select COM port in software; begin data transfer.

Tip: Ensure device is charged or connected to power during data transfer.

Data Logging & Export

Supports internal storage of up to 10,000 data points.

Enable logging: In settings, set logging interval (e.g., every 10 seconds).
Start logging: Device automatically logs when flow is detected.
View data: Press MODE to scroll through stored points on display.
Export: Connect to PC; use FlowXtreme software to download and save as CSV.
Clear memory: Factory reset option in settings (erases all logged data).

WARNING! Export data regularly to avoid memory overflow. Do not disconnect during transfer.

Calibration

Auto-calibration: Hold MODE for 5 seconds in setup mode. Manual calibration: Requires known flow reference.

Ensure stable flow reference source.
Enter calibration mode (Settings > Calibration).
Input reference flow value.
Press RESET to confirm; device adjusts internal coefficients.

Note: Calibrate annually or if accuracy drifts. Use clean water only.

Care & Maintenance

Power off and disconnect before cleaning. Wipe exterior with damp cloth; clean sensor with soft brush and water.

CAUTION! Do not use harsh chemicals or submerge display unit. Store in dry, cool place.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. CE marked for European compliance. Copyright © 2025 Blue Wave Technologies; trademarks of Blue Wave Inc. For support, visit www.bluewavetech.com or contact 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Battery depleted	Charge device fully; ensure power button is pressed.
Inaccurate reading	Sensor dirty/calibration off	Clean sensor; recalibrate using reference flow.
No data logging	Memory full/logging disabled	Clear memory; enable logging in settings.
PC not connecting	Driver/COM port issue	Install correct driver; check COM port settings.
Flow reading zero	Sensor blockage/no flow	Check for pipe blockage; ensure flow is present.

Reset: Settings > System > Factory Reset (erases all data).

Service: 1-800-555-0199; www.bluewavetech.com