Berger+Schröter 32493 Operating Instructions Manual

The Berger+Schröter 32493 is a precision industrial measurement and control instrument designed for professional applications. It features high-accuracy sensors, digital display with backlight, multiple measurement modes, data logging capability, IP65-rated housing, rechargeable battery power, USB connectivity for data transfer, and customizable alarm thresholds. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: High-precision sensor array, Digital LCD display, Control buttons, USB port, Battery compartment, Mounting bracket.

Installation

Unpack and inspect contents. Ensure all components are present.

1. Choose installation location: Select stable, accessible surface away from direct heat sources.
2. Mount device: Use included bracket and screws for secure mounting.
3. Connect power: Insert fully charged battery or connect to power adapter.
4. Sensor positioning: Ensure sensor is properly oriented and unobstructed.

WARNING! Device contains sensitive electronics; handle with care to avoid damage. Ensure mounting surface can support device weight.

First-Time Setup

Power on device; follow initialization procedure.

1. Language selection: Press SET to enter menu, select preferred language.
2. Unit configuration: Choose measurement units (metric/imperial).
3. Calibration: Perform initial calibration as prompted.
4. Alarm thresholds: Set default alarm values for measurements.
5. Date/time: Set current date and time for accurate data logging.

CAUTION! Perform calibration in stable environment for accurate readings.

Specifications

• Model: Berger+Schröter 32493
• Measurement Range: 0-1000 units with ±0.5% accuracy
• Display: 3.5-inch backlit LCD with 320x240 resolution
• Power: Rechargeable Li-ion battery (24V DC, 2000mAh)
• Connectivity: USB 2.0, optional wireless module
• Data Storage: 100,000 measurement points
• Operating Temp: -10°C to +50°C
• Protection Rating: IP65 dust and water resistant
• Dimensions: 150 x 90 x 45 mm
• Weight: 450g (including battery)

Controls and Settings

Access menu system via SET button. Front Panel: POWER, MODE, SET, DATA, UP/DOWN arrows.

Menu Structure: MEASUREMENT MODES, ALARM SETTINGS, DATA LOGGING, SYSTEM CONFIG, CALIBRATION.

Measurement Modes: Continuous, Spot, Average, Peak Hold. Alarm Settings: High/Low thresholds, audible/visual alerts. Data Logging: Interval setting, start/stop control, data review. System Config: Language, units, display brightness, auto-off timer. Calibration: Zero calibration, span calibration, calibration history.

Connecting Devices

USB: For computer connection. Optional: Wireless module for remote monitoring.

1. Turn off device before connecting cables.
2. Connect USB cable to computer and device port.
3. Install software/drivers if prompted.
4. For wireless: Insert module into expansion slot.

Tip: Use included USB cable for guaranteed compatibility.

Measurement Operation

Supports multiple measurement modes for various applications.

1. Power on: Press POWER button; wait for initialization.
2. Select mode: Press MODE to cycle through available measurement modes.
3. Take reading: Position device appropriately; reading displays automatically.
4. Record data: Press DATA to log current reading if logging is active.
5. Adjust settings: Press SET to modify parameters during operation.
6. View history: Access logged data through DATA menu.
7. Set alarms: Configure thresholds that trigger visual/audible alerts.

WARNING! Do not exceed specified measurement ranges. Avoid extreme environmental conditions.

Data Management

Data Logging: Configure intervals from 1 second to 24 hours. Data Export: Transfer via USB to computer software. Data Review: Scroll through stored measurements on device display.

Care & Maintenance

Power off before cleaning. Use soft, dry cloth for display; mild detergent for housing if needed.

Maintenance Schedule: Monthly: Visual inspection. Quarterly: Calibration check. Annually: Full calibration by authorized service center.

CAUTION! Do not immerse in liquids. Avoid abrasive cleaners.

Regulatory Information

CE Certified: Complies with European directives for electromagnetic compatibility and safety. RoHS Compliant: Contains no restricted hazardous substances. FCC Part 15: Class A digital device. Copyright © 2023 Berger+Schröter GmbH; all rights reserved. For technical support, visit www.bergerschroeter.com or contact +49 (0)30 12345678.

Troubleshooting

Reset: Menu > System > Factory Reset (note: erases all data and settings).

Service: Contact authorized Berger+Schröter service center. Do not attempt internal repairs.