Atempower AP100MS User Manual

The Atempower AP100MS is a 100-watt portable power station with multiple output ports, built-in lithium-ion battery, AC inverter, USB-C PD, USB-A, DC outputs, LCD display, and solar charging capability. Designed for outdoor activities, emergencies, and mobile device charging. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging & Power Management 8. Safety Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable power station with lithium-ion battery, LCD display, multiple output ports, and charging inputs.

Feature	Description
AC Output	100W pure sine wave inverter (120V, 60Hz)
USB-C PD Port	Power Delivery up to 60W for fast charging
USB-A Ports	Two standard USB ports (5V/2.4A each)
DC Output	12V/10A carport and 5.5mm DC jack
LCD Display	Shows battery level, input/output power, and status
Solar Charging Input	Supports up to 100W solar panel (MC4 connector)
AC Charging Input	Wall charger input (100-240V, 50/60Hz)
Car Charging Input	12V car charger input
POWER Button	Turns unit on/off
LED Flashlight	Built-in emergency light with SOS mode

Installation

Unpack and inspect contents. Place on stable, dry surface.

Initial Charge: Connect included AC adapter to charging port and wall outlet.
Connect devices: Use appropriate cables for USB, DC, or AC outputs.
For solar charging: Connect compatible solar panel to solar input port.
Ensure proper ventilation during use and charging.

WARNING! Do not expose to water or extreme temperatures. Keep away from flammable materials.

First-Time Setup

Power on unit; check LCD display for battery status.

Fully charge battery: Connect to AC power until display shows 100%.
Configure settings: Press and hold SETTINGS button to access brightness, auto-off timer.
Test outputs: Connect a small device to verify proper operation.
Enable flashlight: Press flashlight button to activate emergency light.

CAUTION! First charge may take 6-8 hours. Use only provided or recommended accessories.

Specifications

Battery Capacity: 100,000mAh / 370Wh lithium-ion.
AC Output: 100W pure sine wave, 120V, 60Hz.
USB-C Output: PD 60W (5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/3A).
USB-A Output: 5V/2.4A each port.
DC Output: 12V/10A (max 120W).
Input: AC 100-240V, 50/60Hz; Solar 12-24V, 100W max.
Display: LCD showing battery %, input/output wattage, temperature.
Weight: 6.6 lbs (3 kg).
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Access settings via SETTINGS button. Front Panel: POWER, flashlight, LCD display.

Buttons: POWER (on/off), Flashlight (press for light, hold for SOS), SETTINGS (press for menu).

LCD Display: Shows battery percentage, input power, output power, estimated runtime. Settings Menu: Brightness (high/medium/low), Auto-off timer (1/2/4/8 hours/off), Buzzer (on/off), Temperature display (°F/°C). Charging: Select input source (AC/solar/car).

Connecting Devices

AC Devices: Plug into AC outlet (max 100W). USB: Connect phones, tablets, cameras. DC: Connect car appliances, portable fridge.

Turn on power station before connecting devices.
Match device power requirements to appropriate port.
Monitor LCD for output power and battery level.

Tip: Do not exceed total 100W output across all ports simultaneously.

Charging & Power Management

Supports AC wall charging, solar charging, and car charging.

AC Charging: Connect included adapter to AC input and wall outlet.
Solar Charging: Connect compatible solar panel to solar input port.
Car Charging: Use 12V car charger cable while driving.
Battery Care: Avoid complete discharge; recharge when below 20%.
Power Saving: Enable auto-off timer to conserve battery.
Simultaneous Use: Charge station while powering devices (pass-through charging).

WARNING! Use only recommended solar panels. Do not charge in extreme temperatures.

Safety Features

Overload Protection: Automatically shuts off if exceeding rated power. Short Circuit Protection: Cuts output during short circuit. Temperature Control: Reduces power if overheating. Low Voltage Protection: Shuts down when battery below 10% to prevent damage.

Care & Maintenance

Store in cool, dry place. Clean with dry cloth; do not use liquids.

CAUTION! Do not disassemble. Avoid dropping or impacting. Recharge every 3 months if storing long-term.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits. UL Certified: Meets safety standards for portable power stations. Copyright © 2025 Atempower; trademarks of Atempower Technologies. For support, visit www.atempower.com or contact 1-800-555-ATEM.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit not powering on	Battery depleted	Connect to AC power for charging; check power button.
No output from ports	Overload protection triggered	Disconnect devices, wait 30 seconds, restart unit.
Slow charging	Low input power	Ensure proper power source; use recommended charger.
LCD display blank	Sleep mode or fault	Press any button; if persists, reset unit.
Overheating	High ambient temperature or overload	Move to cooler location; reduce connected load.

Reset: Press and hold POWER + SETTINGS for 10 seconds.

Service: 1-800-555-ATEM; www.atempower.com/support