Arlo Solar Panel Quick Start Manual

The Arlo Solar Panel is a weather-resistant accessory designed to continuously charge compatible Arlo wire-free cameras, extending battery life and reducing maintenance. It features a durable, adjustable design for optimal sun exposure, a secure magnetic mount, and a weatherproof USB connection. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Package Contents 3. Installation & Positioning 4. Specifications 5. Connecting to Your Camera 6. Charging & Performance 7. Care & Maintenance 8. Regulatory Information 9. Troubleshooting

Features at a Glance

Key components: High-efficiency solar cell, Adjustable mounting bracket, Magnetic camera mount, Weatherproof USB cable, Integrated cable management.

Feature	Description
Solar Panel	Converts sunlight to electrical energy for continuous charging
Adjustable Bracket	Allows optimal angle adjustment for maximum sun exposure
Magnetic Mount	Securely attaches to compatible Arlo camera bases
Weatherproof USB Cable	Durable, sealed connection resistant to rain and dust
Cable Management Clip	Keeps excess cable organized and protected
LED Indicator	Shows charging status (solid green = charging, blinking = issue)
Universal Mount	Compatible with wall, pole, or ground installation
Quick-Release Mechanism	Easy to detach for cleaning or repositioning

Package Contents

Unpack and verify all items are present.

Arlo Solar Panel (1)
Adjustable Mounting Bracket (1)
Weatherproof USB Cable (1)
Mounting Screws & Anchors (set)
Quick Start Guide (this manual)
Warranty Information Card

NOTE: Compatible Arlo camera and mounting hardware sold separately. Ensure you have the correct model.

Installation & Positioning

For optimal performance, install in a location with direct sunlight for most of the day.

Choose Location: Select a spot with maximum sun exposure, facing south (Northern Hemisphere) or north (Southern Hemisphere).
Mount Bracket: Use provided screws to secure the adjustable bracket to a wall, pole, or other stable surface.
Attach Solar Panel: Snap the solar panel onto the bracket and adjust the angle for best sun capture.
Route Cable: Use the cable clip to secure the USB cable along the mounting surface, avoiding sharp edges.
Connect to Camera: Plug the weatherproof USB connector into your Arlo camera's charging port.

WARNING! Do not install near heat sources or flammable materials. Ensure all connections are secure and weatherproof.

Specifications

Power Output: Up to 2.4W under optimal sunlight
Dimensions: 7.1 x 4.3 x 1.2 inches (180 x 110 x 30 mm)
Weight: 8.8 oz (250 g)
Operating Temperature: -4°F to 122°F (-20°C to 50°C)
Weather Resistance: IP65 rated (dust-tight and protected against water jets)
Cable Length: 10 ft (3 m) weatherproof USB cable
Compatibility: Arlo Pro, Arlo Pro 2, Arlo Ultra, Arlo Essential series (check model specifics)
Warranty: 1-year limited warranty

Connecting to Your Camera

Ensure your Arlo camera is mounted in its desired location.
Route the solar panel's USB cable to the camera, using clips to secure it.
Open the weatherproof seal on the camera's charging port.
Firmly plug in the USB connector until it clicks into place.
Close the seal tightly to maintain weather resistance.
The LED on the solar panel should glow solid green, indicating charging is active.

Tip: Test the connection before finalizing cable routing. Check the Arlo app for battery status.

Charging & Performance

The solar panel provides trickle charging to extend battery life. Performance depends on sunlight exposure.

Optimal Conditions: Direct, unobstructed sunlight for 6+ hours daily.
Charging Indicator: Solid green LED = charging. Blinking LED = check connection or sunlight.
Battery Maintenance: In optimal sun, the panel can maintain a full charge or significantly extend time between charges.
Seasonal Notes: Shorter days or cloudy weather may reduce charging efficiency. Monitor battery via the Arlo app.

NOTE: The solar panel is designed to maintain charge, not rapidly recharge a fully depleted battery. Use the original charger for initial full charge if needed.

Care & Maintenance

Regular cleaning ensures maximum efficiency.

Cleaning: Wipe the solar panel surface with a soft, damp cloth to remove dust, pollen, or debris. Do not use abrasive cleaners.
Inspection: Periodically check the USB connection seal for integrity and ensure the cable is not damaged.
Winter Care: Light snow may melt off. Brush off heavy snow accumulation gently. Ice can be melted with lukewarm water (do not pour hot water).
Storage: If removing, store in a cool, dry place away from direct sunlight.

CAUTION! Do not disassemble the unit. Avoid harsh chemicals or high-pressure water sprays.

Regulatory Information

FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that it does not cause harmful interference. ICES-003 Compliance: This Class B digital apparatus complies with Canadian ICES-003. Waste Electrical & Electronic Equipment (WEEE): Do not dispose of with household waste. Recycle according to local regulations. For support, visit support.arlo.com or contact 1-800-375-2125.

Troubleshooting

Symptom	Possible Cause	Corrective Action
LED not lighting	Insufficient sun, poor connection	Reposition for direct sun; check USB connection at both ends; ensure seal is closed.
Camera battery draining	Low sunlight, high camera activity	Verify panel placement; reduce camera sensitivity/recording frequency in app; clean panel.
Loose connection	Damaged cable or port	Inspect cable for damage; ensure connector is fully inserted and sealed.
Panel not charging	Shading, wrong angle, faulty panel	Remove obstructions (leaves, etc.); adjust angle seasonally; try original charger to test camera port.
Water in connection	Seal not closed properly	Disconnect, dry thoroughly, and reconnect, ensuring the rubber seal is fully seated.

Reset: Disconnect USB from camera for 10 seconds, then reconnect.

Service: 1-800-375-2125; support.arlo.com