Aqua Creek Products F-SLR Manual

The Aqua Creek Products F-SLR is a freestanding pool lift designed for accessibility, featuring a durable stainless steel frame, battery-powered operation, simple push-button controls, adjustable seat height, weight capacity up to 300 lbs, and compliance with ADA standards. Below are key sections for safety, features, installation, setup, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Operating the Lift 8. Accessibility Features 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Stainless steel frame, Battery pack, Control panel with Up/Down buttons, Adjustable seat with armrests, Footrest, Safety belt, Charging unit.

Feature	Description
Stainless steel frame	Corrosion-resistant construction for poolside use
Battery-powered operation	Rechargeable battery for cord-free use
Control panel	Simple Up/Down buttons for lift operation
Adjustable seat height	Customizable for user comfort and pool depth
Weight capacity	Up to 300 lbs (136 kg)
Safety belt	Secures user during transfer
Footrest	Adjustable for proper leg support
Charging unit	For recharging the battery
ADA compliant	Meets Americans with Disabilities Act standards
Freestanding design	No permanent installation required

Installation

Unpack and inspect all components. Place on level surface near pool edge.

Assemble frame: Connect base sections and secure with provided bolts.
Attach seat and armrests: Slide seat onto vertical post and lock in place.
Install footrest: Adjust to desired height and tighten screws.
Mount control panel: Attach to armrest or frame as directed.
Insert battery: Place battery in compartment and connect terminals.

WARNING! Ensure all bolts are tightened securely. Do not use if any parts are damaged.

First-Time Setup

Charge battery fully before first use.

Charge battery: Connect charger to battery and AC outlet for 8-12 hours.
Test operation: Press Up/Down buttons to ensure smooth movement.
Adjust seat height: Set for user comfort and pool access.
Position lift: Place so seat lowers into water at appropriate depth.
Secure safety belt: Ensure proper fit and function.

CAUTION! Keep charger away from water. Test lift without user first.

Specifications

Model: F-SLR Freestanding Pool Lift
Frame Material: 304 Stainless Steel
Weight Capacity: 300 lbs (136 kg)
Seat Height Range: 18-24 inches adjustable
Power Source: 12V Rechargeable Battery
Charging Time: 8-12 hours for full charge
Operation Time: Up to 30 cycles per charge
Controls: Waterproof push-button panel
Safety Features: Safety belt, non-slip seat, emergency stop
Compliance: ADA Standards for Accessible Design

Controls and Settings

Control Panel: UP button (raises seat), DOWN button (lowers seat).

Adjustments: Seat height (via locking pin), Footrest height (adjustable brackets), Armrest position (fixed or removable).

Battery Indicator: LED shows charge status (green=charged, red=low). Safety: Always use safety belt during operation. Emergency: Release button stops all movement immediately.

Connecting Power

Battery: 12V rechargeable sealed lead-acid. Charger: AC adapter with indicator light.

Turn off lift before connecting charger.
Plug charger into battery port.
Connect charger to AC outlet (120V).
Charge until indicator shows full (green light).
Disconnect charger before use.

Tip: Charge battery after each use for maximum life.

Operating the Lift

For safe transfer into and out of pool.

Position user: Wheelchair next to lift seat.
Secure safety belt: Fasten around user.
Lower to water: Press DOWN button until seat is submerged.
Assist transfer: Help user move from seat to water.
Raise seat: Press UP to return seat to deck level.
Reverse for exit: Lower seat, assist user onto it, raise to deck.

WARNING! Never exceed weight limit. Always supervise users. Keep clear during movement.

Accessibility Features

ADA Compliance: Meets height, reach, and operation requirements. Adjustable Components: Seat, footrest, and armrests accommodate various users. Simple Controls: Large, color-coded buttons for easy operation.

Care & Maintenance

Regular cleaning extends life. Check bolts monthly.

Clean frame: Wipe with damp cloth and mild soap. Rinse with fresh water.
Lubricate: Apply silicone spray to moving parts annually.
Inspect: Check bolts, seat, belt, and battery connections regularly.
Battery care: Charge fully every month if not in use. Store in cool, dry place.

CAUTION! Do not use abrasive cleaners. Never submerge control panel.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Lift does not move	Dead battery	Charge battery fully; check connections.
Slow movement	Low battery	Recharge battery; reduce load if near capacity.
Seat not adjusting	Locking pin stuck	Clean and lubricate pin mechanism.
Noise during operation	Dry moving parts	Apply silicone lubricant to joints.
Control panel not responding	Water damage	Dry thoroughly; contact service if persists.

Reset: Disconnect battery for 5 minutes, then reconnect.

Service: 1-800-555-1234; www.aquacreek.com