Anslut 014400 Operating Instructions Manual

The Anslut 014400 is a versatile power tool designed for various DIY and professional applications. It features a robust motor, multiple speed settings, ergonomic design, and safety mechanisms. Below are key sections covering safety, features, assembly, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Instructions 3. Assembly & Installation 4. Specifications 5. Controls and Operation 6. Maintenance & Cleaning 7. Storage 8. Troubleshooting 9. Warranty Information

Features at a Glance

Key components: Motor unit, adjustable handle, power cord, safety lock, speed selector, and accessory chuck.

Feature	Description
Motor	High-torque, variable speed motor for multiple applications
Speed Selector	Adjustable speed settings for different materials
Safety Lock	Prevents accidental start-up
Ergonomic Handle	Reduces fatigue during extended use
Accessory Chuck	Quick-change system for various attachments
Overload Protection	Automatically cuts power in case of motor overload

Safety Instructions

Read all instructions before use. Keep work area clean and well-lit.

Personal Safety: Wear eye protection. Do not operate while tired or under influence.
Tool Use: Use correct accessory for each job. Do not force the tool.
Electrical Safety: Avoid body contact with grounded surfaces. Do not expose to rain.
Power Cord: Do not carry tool by cord. Keep cord away from heat, oil, and sharp edges.

WARNING! Disconnect tool from power source before making adjustments or changing accessories.

Assembly & Installation

Unpack and inspect all components.

Attach Handle: Align handle with housing and secure with provided screws.
Install Accessory: Insert appropriate accessory into chuck and tighten securely.
Power Connection: Plug into appropriate power outlet (check voltage requirements).
Test Run: Perform brief test run without load to ensure proper operation.

CAUTION! Ensure all fasteners are tight before operation.

Specifications

Model: Anslut 014400
Power Input: 230V~50Hz
Power Consumption: 600W
No-Load Speed: 0-3000 RPM
Chuck Capacity: 10mm
Weight: 1.8 kg
Sound Pressure Level: < 85 dB(A)
Vibration Level: < 2.5 m/s²

Controls and Operation

Main Controls: Power switch, speed control dial, safety lock button.

Starting: Press safety lock, then depress power switch. Release power switch to stop.

Speed Adjustment: Rotate speed control dial while tool is running or stopped.

Changing Accessories: Unplug tool. Open chuck, remove old accessory, insert new, tighten securely.

Maintenance & Cleaning

Regular maintenance ensures optimal performance and longevity.

After each use: Clean exterior with dry cloth.
Monthly: Check all screws and fasteners for tightness.
Ventilation Slots: Keep free of dust and debris.
Chuck: Lubricate occasionally with light machine oil.

CAUTION! Never use water or solvents for cleaning. Unplug before maintenance.

Storage

Store in dry, clean place away from children.

Use original packaging or suitable case. Hang or lay flat to avoid damage.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Tool does not start	No power / Safety lock engaged	Check power outlet and cord; Disengage safety lock
Reduced power	Overload / Worn brushes	Reduce load; Have brushes checked by professional
Excessive vibration	Damaged accessory / Loose parts	Replace accessory; Tighten all fasteners
Overheating	Blocked vents / Continuous heavy use	Clean ventilation slots; Allow tool to cool
Accessory slips	Chuck not tight enough	Tighten chuck properly; Replace if worn

Warranty Information

Anslut 014400 comes with a 2-year warranty from date of purchase against manufacturing defects. Warranty does not cover damage from misuse, improper maintenance, or unauthorized repairs. For warranty service, contact authorized service center with proof of purchase.

Support: Contact customer service at +46 8 123 4567 or visit www.anslut.com