Anker SOLIX PS400 Quick Start Manual

The Anker SOLIX PS400 is a portable power station designed for reliable backup power and outdoor use. It features a 400Wh capacity, multiple output ports (AC, DC, USB), pure sine wave AC output, a high-brightness LED light, an LCD screen for status monitoring, and support for solar charging. Below are key sections for safety, features, setup, operation, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. First-Time Setup 4. Specifications 5. Controls and Indicators 6. Charging the Power Station 7. Using Output Ports 8. Solar Charging 9. Maintenance & Storage 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Portable power station unit, AC charging cable, car charging cable, user manual.

Feature	Description
AC Output	Pure sine wave, 300W continuous (600W surge)
USB-A Ports	Two ports for charging phones, tablets, etc.
USB-C Port	One port with Power Delivery for fast charging
DC Output	12V/10A car socket for car appliances
DC Input	For AC wall charging and solar panel input
LCD Screen	Displays battery level, input/output wattage, and status
LED Light	Built-in light with SOS and flashing modes
Battery Capacity	400Wh (Lithium-ion)
Weight	Approximately 10.8 lbs (4.9 kg)
Operating Temp	14°F to 104°F (-10°C to 40°C)

Safety Information

Read all safety instructions before use.

Keep away from water, heat sources, and direct sunlight.
Do not disassemble, puncture, or modify the unit.
Use only Anker-approved charging cables and accessories.
Do not connect high-power devices exceeding rated output.
Store in a cool, dry place when not in use.

WARNING! Risk of fire or electric shock if misused. Do not expose to rain or moisture. Keep out of reach of children.

First-Time Setup

Unpack and inspect contents. Charge fully before first use.

Charge via AC: Connect AC charging cable to DC input port and wall outlet.
Monitor charging: LCD screen shows battery level and charging status.
Power on: Press and hold power button for 2 seconds to turn on.
Test outputs: Connect a small device to ensure proper operation.

CAUTION! Ensure unit is placed on a stable, flat surface during charging and use.

Specifications

Capacity: 400Wh (108,000mAh @ 3.7V).
Battery Type: Lithium-ion.
AC Output: 300W continuous, 600W surge, pure sine wave.
USB-A Output: 5V/2.4A per port.
USB-C Output: Up to 60W with Power Delivery.
DC Output: 12V/10A (car socket).
DC Input: 12-30V, up to 120W for AC/solar charging.
LCD Display: Shows battery %, input/output power, estimated time.
LED Light: 3 modes (steady, SOS, flashing).
Weight: 10.8 lbs (4.9 kg).
Dimensions: 9.8 x 5.5 x 7.7 in (250 x 140 x 195 mm).

Controls and Indicators

Front Panel: Power button, LCD screen, LED light button, output ports.

LCD Screen: Displays battery percentage, input/output wattage, remaining runtime, and error codes.

Power Button: Press once to turn on/off outputs; press and hold for 2 seconds to turn unit on/off.

LED Light Button: Press to cycle through modes (steady on, SOS, flashing, off).

AC Output Button: Press to enable/disable AC outlets.

USB/DC Buttons: Press to enable/disable respective port groups.

Charging the Power Station

Three charging methods: AC wall outlet, car charger, solar panel.

AC Charging: Use included AC charging cable; connect to DC input port and wall outlet. Full charge in ~6 hours.
Car Charging: Use car charging cable; connect to DC input port and car 12V socket. Full charge in ~8 hours.
Solar Charging: Use compatible solar panel (12-30V); connect to DC input port. Charging time varies by sunlight.

Tip: For best battery health, avoid frequent full discharges; recharge when battery drops below 20%.

Using Output Ports

Supports multiple devices simultaneously up to total output limit.

AC Output: Plug devices into AC outlets; ensure total wattage ≤ 300W.
USB Ports: Connect phones, tablets, cameras; USB-C supports laptops.
DC Output: Use for car appliances like coolers, air pumps.
LED Light: Press light button to activate desired mode.

WARNING! Do not connect devices exceeding rated power. Overloading may cause shutdown or damage.

Solar Charging

Use with compatible solar panels (sold separately).

Connect solar panel to DC input port using appropriate cable.
Place panel in direct sunlight; ensure proper orientation.
Monitor charging on LCD screen; input wattage varies with sunlight.
For optimal performance, use Anker SOLIX solar panels.

CAUTION! Do not look directly at solar panel. Keep panel and cables dry.

Maintenance & Storage

Clean with dry cloth; store in cool, dry place.

Recharge every 3 months if storing long-term.
Keep battery level between 30-80% for storage.
Avoid extreme temperatures; do not leave in car.
If not used for extended period, fully charge then discharge to 50% before storage.

CAUTION! Do not expose to fire or high heat. Do not attempt to replace battery.

Regulatory Information

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't turn on	Battery depleted	Charge for at least 30 minutes before use.
No output from ports	Ports disabled/overload	Press corresponding port button; check if overload shutdown occurred.
Slow charging	Low input power	Use proper charger; ensure solar panel in direct sunlight.
LCD screen blank	Unit off/battery dead	Charge unit; press power button for 2 seconds.
Overheat warning	High ambient temperature	Move to cooler location; allow to cool before use.
Error code on display	Various faults	Refer to manual error code chart; contact support if persistent.

Reset: Turn off unit, disconnect all devices, wait 1 minute, then restart.

Service: [email protected]; www.anker.com/support