Anker SOLIX PS30 User Manual

The Anker SOLIX PS30 is a portable power station designed for reliable off-grid and emergency power. With a 300Wh capacity, 300W AC pure sine wave output, multiple output ports (AC, USB-A, USB-C, DC), and advanced battery management system, it powers a wide range of devices from smartphones to small appliances. Features include an LCD screen for monitoring, pass-through charging, solar charging capability, and a compact, durable design. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Charging the Power Station 8. Safety Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Lithium-ion battery pack, AC pure sine wave inverter, LCD display, Multiple output ports, Solar charging input, Car charging input.

Feature	Description
AC Output	300W pure sine wave, 110V/60Hz, for small appliances
USB-A Output	Two ports, 5V/2.4A each, for smartphones and tablets
USB-C Output	One port, 60W max, for fast-charging laptops and devices
DC Output	12V/10A car port, for car accessories and coolers
LCD Display	Shows battery level, input/output wattage, and status
Solar Charging Input	Supports up to 100W solar panel (MC4 connector)
AC Charging Input	Standard wall outlet charging (included adapter)
Car Charging Input	12V car cigarette lighter charging (included cable)
Battery Management System	Protects against overcharge, over-discharge, short circuit
Pass-Through Charging	Can charge devices while power station itself is charging

Installation

Unpack and inspect contents. Place on stable, dry surface away from heat and moisture.

Initial Charge: Connect included AC adapter to power station and wall outlet for full charge.
Solar Panel Setup: Connect compatible solar panel to SOLAR INPUT port using MC4 connector.
Device Connections: Plug devices into appropriate output ports based on power requirements.
Storage: Store in cool, dry place when not in use; charge every 3-6 months for battery health.

WARNING! Do not expose to water, fire, or extreme temperatures. Keep away from children.

First-Time Setup

Power on unit; check LCD display for battery level and status.

Initial Charge: Charge fully via AC adapter before first use (approx. 6-7 hours).
LCD Overview: Understand icons for battery percentage, input/output power, warnings.
Output Port Activation: Press power button, then press corresponding port button to activate.
Solar Charging: Connect solar panel in direct sunlight; ensure proper polarity and voltage.

CAUTION! Use only Anker-approved solar panels and accessories to avoid damage.

Specifications

Capacity: 300Wh (Lithium-ion).
AC Output: 300W pure sine wave, 110V/60Hz.
USB-A Output: 5V/2.4A per port (two ports).
USB-C Output: 60W max (PD 3.0).
DC Output: 12V/10A (car port).
Input: AC 110V/60Hz, Solar 12-24V/100W max, Car 12V/8A.
Battery Life: 500+ cycles to 80% capacity.
Display: LCD with real-time monitoring.
Weight: Approx. 7.7 lbs (3.5 kg).
Operating Temp: 32°F to 104°F (0°C to 40°C).

Controls and Settings

Front Panel: POWER button, LCD display, Port selection buttons, DC output button.

LCD Icons: Battery percentage, Input/Output wattage, Temperature warning, Overload warning.

Settings: Press and hold POWER for 3 seconds to turn on/off. Press port buttons to activate/deactivate outputs. DC output requires pressing DC button separately. No user-adjustable settings beyond port control.

Connecting Devices

Match device power requirements to appropriate output ports.

AC Devices: Plug into AC outlet (max 300W continuous).
USB Devices: Use USB-A for standard charging, USB-C for fast charging.
DC Devices: Use 12V car port for car accessories (max 10A).
Multiple Devices: Can power multiple devices simultaneously within total 300W limit.

Tip: Check device wattage before connecting; do not exceed 300W total output.

Charging the Power Station

Supports AC wall charging, solar charging, and car charging.

AC Charging: Use included AC adapter; full charge in ~6-7 hours.
Solar Charging: Connect compatible 100W solar panel; charging time varies with sunlight.
Car Charging: Use included car charging cable while driving; slower than AC charging.
Pass-Through: Can charge devices while power station is being charged.
LCD Monitoring: Display shows input wattage and estimated time to full charge.

WARNING! Do not use damaged charging cables. Disconnect during thunderstorms.

Safety Features

Battery Management System: Prevents overcharge, over-discharge, over-temperature, short circuit. Automatic shutdown if overload or temperature exceeds limits. LCD warnings for abnormal conditions.

Care & Cleaning

Power off and disconnect all devices before cleaning. Use dry, soft cloth only; do not use liquids or abrasive cleaners.

CAUTION! Avoid exposure to water, dust, and extreme temperatures. Store with 50-80% charge if not used for extended periods.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. UL and CE certified for safety. Copyright © 2025 Anker Innovations Limited. For support, visit www.anker.com or contact 1-800-988-7973.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power output	Battery depleted/overload	Recharge unit; check if connected device exceeds 300W.
LCD not displaying	Battery completely drained	Connect to AC charger for at least 10 minutes.
Solar not charging	Insufficient sunlight/connection	Ensure direct sunlight; check solar panel connections.
Overload warning	Connected device wattage too high	Disconnect device; restart power station.
Unit gets hot	High ambient temp/continuous high load	Move to cooler area; reduce load; allow to cool.

Reset: Disconnect all devices, turn off, wait 1 minute, then restart.

Service: 1-800-988-7973; www.anker.com