Allwei XY-100W User Manual

The Allwei XY-100W is a high-performance 100-watt wireless audio amplifier featuring Bluetooth 5.3 connectivity, multi-room audio sync, built-in DSP for sound optimization, RCA and optical inputs, speaker-level outputs, remote control, mobile app integration, and voice assistant compatibility. Powered by 110-240V AC, 50/60Hz. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Wireless Operation 8. Advanced Features 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: High-efficiency Class D amplifier, Bluetooth module, Remote Control, RCA INPUT, Optical INPUT, Speaker Output terminals, Power connector.

Feature	Description
Bluetooth 5.3	For wireless audio streaming from compatible devices
RCA INPUT ports	For analog audio connection
Optical INPUT port	For digital audio connection
Speaker Output terminals	For connecting passive speakers
AC input connector	For power connection
USB Service port	For firmware updates
POWER	Turns amplifier on/off
SOURCE	Cycles between input sources (BT, RCA, OPT)
VOLUME	Adjusts output volume level
PAIR	Initiates Bluetooth pairing mode

Installation

Unpack and inspect contents. Place on stable, well-ventilated surface.

Connect speakers: Attach speaker wires to OUTPUT terminals, observing correct polarity (+/-).
Connect audio sources: Use RCA cables for analog devices; optical cable for digital sources.
Connect to power: Plug the provided power cord into the AC input and a wall outlet.
Power on: Press the front panel POWER button.

WARNING! Ensure proper ventilation to prevent overheating. Do not block ventilation slots.

First-Time Setup

Power on the amplifier; the status LED will illuminate.

Pair Bluetooth device: Press and hold PAIR button until LED flashes, then select "Allwei XY-100W" on your device.
Select input source: Press SOURCE to cycle between Bluetooth (BT), Analog (RCA), and Digital (OPT).
Adjust volume: Use VOLUME knob or remote control to set initial listening level.
Configure via app: Download "Allwei Audio" app for advanced DSP and multi-room setup.

CAUTION! Use speakers with impedance rating of 4-8 ohms. Check connections before powering on.

Specifications

Power Output: 100 watts RMS per channel (4Ω).
Bluetooth: Version 5.3, A2DP, AVRCP, SBC, AAC codecs.
Sound: Adjustable via DSP profiles (FLAT, VOCAL, BASS, MOVIE).
Terminals: RCA Input, Optical Input, Speaker Outputs (A/B), USB Service.
Multi-room: Sync up to 4 units via app.
Supported formats: Stereo PCM via optical input.
Power Source: 110-240V AC, 50/60Hz.
Operating Temp: 0°C to 40°C (32°F to 104°F).

Controls and Settings

Access settings via front panel buttons, remote control, or mobile app. Front Panel: POWER, SOURCE, VOLUME, PAIR.

Remote: POWER, SOURCE, VOLUME UP/DOWN, MUTE, DSP (cycles sound profiles), PAIR.

DSP Settings: FLAT (default), VOCAL (enhances midrange), BASS (boosts low frequencies), MOVIE (widens dynamic range). App Settings: Room calibration, multi-group creation, firmware updates, voice assistant link (Google/Alexa). Install: Language selection, auto-standby timer (30 min default).

Connecting Devices

Analog: RCA INPUT ports. Digital: Optical INPUT port. Wireless: Bluetooth.

Turn off amplifier before connecting wired devices.
Match cables to ports (e.g., RCA to RCA, Toslink to Optical).
Select corresponding input source via SOURCE button or remote.

Tip: For best digital audio quality, use a high-quality optical cable and ensure source output is set to PCM.

Wireless Operation

Supports Bluetooth streaming from smartphones, tablets, and computers.

Pairing: Initiate pairing mode via PAIR button; confirm connection on your device.
Playback: Control play/pause, skip tracks from your source device or remote.
Volume Control: Adjust volume from amplifier or source device (recommend using amplifier control).
Multi-device: Remembers up to 8 paired devices; connects to the last used available device.
Range: Operational up to 10 meters (33 feet) in open space.

WARNING! Interference from other wireless devices may reduce range or cause dropouts.

Advanced Features

Multi-room Audio: Create synchronized groups via the "Allwei Audio" app. Voice Control: Enable in app to control power, volume, and source via linked voice assistant. Auto Standby: Powers down after 30 minutes of no signal (adjustable in app).

Care & Cleaning

Unplug from power before cleaning. Use a soft, dry cloth to wipe exterior. For stubborn marks, lightly dampen cloth with water only.

CAUTION! Do not use chemical cleaners, solvents, or abrasives. Never allow liquid to enter ventilation slots or ports.

Regulatory Information

FCC Part 15: Class B digital device; complies with limits for residential use. ICES-003: Compliant. This device complies with Industry Canada licence-exempt RSS standard(s). Copyright © 2025 Allwei Audio Systems; trademarks of Allwei Group. For support, visit www.allweiaudio.com or contact 1-800-555-0199.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power	Power cord/outlet	Ensure power cord is securely connected; try a different outlet.
No sound from speakers	Connections/source/volume	Check speaker wire connections; ensure correct input source is selected; increase volume.
Bluetooth won't connect	Pairing mode/range/interference	Enter pairing mode (flashing LED); move device closer; turn off other nearby Bluetooth devices.
Distorted sound	Overload/clipping	Reduce volume on source and amplifier; check speaker impedance rating.
App cannot find amplifier	Wi-Fi/Bluetooth	Ensure phone Bluetooth is on and amplifier is powered; restart both devices.

Reset: Hold POWER and SOURCE buttons for 10 seconds to restore factory defaults.

Service: 1-800-555-0199; www.allweiaudio.com/support