All Traffic Solutions SPBRAC100-ASB Installation Manual

The All Traffic Solutions SPBRAC100-ASB is a high-visibility, portable, and durable speed feedback radar sign designed for traffic calming and speed awareness. It features a bright LED display, solar power option, rugged construction for outdoor use, programmable speed thresholds, data logging capabilities, and versatile mounting options. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Power 7. Programming & Operation 8. Data Retrieval 9. Care & Maintenance 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Radar sensor, High-intensity LED display, Control panel, Solar panel input, Data port, Mounting brackets.

Feature	Description
Radar Sensor	Detects vehicle speed with high accuracy
LED Display	Bright, sunlight-readable display for speed feedback
Solar Power Input	For connection to optional solar panel for continuous operation
Data Logging Port	USB or serial port for retrieving speed and volume data
Control Panel	Protected keypad for programming and settings
Mounting Brackets	For permanent pole mounting or portable tripod setup
POWER Button	Turns unit on/off
MENU Button	Accesses programming menu
DISPLAY Button	Cycles through display modes (Speed, Blank, Message)
RESET Button	Resets data logs or returns to factory defaults

Installation

Unpack and inspect contents. Choose mounting location with clear view of traffic.

Select Mounting Type: Permanent pole or portable tripod.
Assemble Mounting Hardware: Use provided brackets and bolts.
Position the Sign: Ensure radar sensor is aimed at approaching traffic, 3-6 feet above ground, at a slight angle.
Secure the Unit: Tighten all bolts and brackets securely.

WARNING! Install away from obstructions. Ensure the sign does not obstruct driver sight lines. Follow local traffic regulations.

First-Time Setup

Power on the unit; access the programming menu.

Set Speed Threshold: Program the speed limit for the zone. The display will flash when exceeded.
Set Display Mode: Choose constant display, flashing, or blank until triggered.
Set Sensitivity: Adjust radar sensitivity for vehicle detection range.
Set Data Logging Interval: Choose how often speed/volume data is recorded.

CAUTION! Program settings before final installation. Use two people when handling the sign assembly.

Specifications

Display: High-intensity, multi-digit LED.
Radar Frequency: K-band or similar compliant frequency.
Detection Range: Up to 300 feet typical.
Power Options: 12V DC external power, or optional solar panel with battery backup.
Data Logging: Stores speed and volume data by date/time.
Operating Temp: -22°F to 140°F (-30°C to 60°C).
Enclosure: NEMA-rated, weatherproof housing.
Mounting: Pole mount or tripod.

Controls and Settings

Access programming menu via MENU button on control panel.

Menu Structure: SPEED LIMIT, DISPLAY MODE, SENSITIVITY, DATA LOG, SYSTEM INFO, RESET.

Speed Limit: Set value (e.g., 25 MPH). Display Mode: ON (always on), FLASH (flash when exceeded), TRIGGER (on only when vehicle detected). Sensitivity: LOW, MEDIUM, HIGH for detection range. Data Log: INTERVAL (1 min, 5 min, 15 min), DOWNLOAD. System Info: Firmware version, battery voltage (if solar). Reset: Clear data or restore factory defaults.

Connecting Power

Primary: 12V DC power adapter. Optional: Solar panel with charge controller.

Turn off unit before connecting power.
Connect 12V DC plug to power input port on rear.
For solar: Connect solar panel to designated input, ensuring correct polarity.
Power on the unit. The display should initialize.

Tip: For solar installations, ensure panel is oriented for maximum sun exposure and free of shade.

Programming & Operation

Unit operates automatically after setup.

Normal Operation: Displays approaching vehicle speed. Flashes if over preset limit.
Change Settings: Press MENU, navigate with arrow keys, enter values, press ENTER to save.
Test Mode: Use to verify radar detection and display functionality.
Sleep Mode: Can be programmed to turn off during low-traffic hours.

WARNING! Do not aim radar sensor directly at large metal objects or other radar sources to avoid interference.

Data Retrieval

Download logged speed and traffic volume data.

Connect USB cable (or serial cable) from sign's data port to computer.
Use provided software or a terminal program to initiate download.
Data is typically in CSV format for analysis in spreadsheet software.

Care & Maintenance

Periodically inspect and clean.

Clean display face with soft, damp cloth. Do not use abrasive cleaners.
Check mounting hardware for tightness.
For solar systems, clean solar panel surface and check battery connections.
Inspect housing for cracks or water ingress.

CAUTION! Disconnect power before performing any maintenance. Do not open the electronics enclosure.

Regulatory Information

FCC Part 15: Class B digital device. Complies with RF exposure limits. This device must not cause harmful interference. ICES-003: Complies with Canadian EMI standards. For support, visit www.alltrafficsolutions.com or contact 1-800-882-8182.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	No power	Check power connections, fuse, and battery (if solar). Ensure unit is turned ON.
Inaccurate speed reading	Poor alignment, interference	Re-aim radar sensor. Ensure no large reflective surfaces nearby.
Display not flashing for speeders	Speed threshold setting	Verify and reprogram the speed limit in the menu.
Data not logging	Full memory, incorrect setting	Download existing data to clear memory. Check data log interval setting.
Intermittent operation (solar)	Low battery, poor sun	Check battery voltage and solar panel connections/cleanliness.

Reset: Menu > System > Reset to Factory Defaults (will erase data and settings).

Service: 1-800-882-8182; www.alltrafficsolutions.com