Agro Electro 0090 User Manual

The Agro Electro 0090 is a versatile agricultural electrical controller designed for irrigation systems, greenhouse climate control, and farm equipment automation. It features programmable timers, moisture sensor inputs, temperature/humidity monitoring, relay outputs for pumps and valves, LCD display with backlight, waterproof housing (IP65), battery backup, and remote control capability. Powered by 12-24V DC or 110-240V AC. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Sensors & Devices 7. Programming Operations 8. Safety Features 9. Maintenance & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main control unit with LCD display, Remote Control, Sensor input terminals, Relay output terminals, Power supply connectors, Programming buttons.

Feature	Description
LCD Display	Backlit screen showing status, time, and programming
Sensor Inputs	4 ports for moisture, temperature, humidity, rain sensors
Relay Outputs	6 channels for pumps, valves, fans, lights (10A each)
Power Input	12-24V DC or 110-240V AC with automatic detection
Battery Backup	Internal rechargeable battery for memory retention
Waterproof Housing	IP65 rated for outdoor and humid environments
PROGRAM	Enters programming mode
MANUAL/AUTO	Toggles between manual override and automatic operation
RESET	Resets alarms and fault conditions
POWER	Turns controller on/off

Installation

Unpack and inspect contents. Mount on wall or panel in protected location.

Mount unit: Use provided brackets; ensure ventilation and access.
Connect power: Select appropriate voltage; connect to terminal block.
Connect sensors: Wire moisture/temperature sensors to labeled inputs.
Connect outputs: Connect pumps, valves, or other devices to relay terminals.
Secure all connections and close housing.

WARNING! Disconnect all power before installation. Use proper gauge wires. Ensure housing is sealed.

First-Time Setup

Power on controller; follow display prompts.

Set date/time: Press PROGRAM, navigate to CLOCK settings.
Configure sensors: In SETUP menu, calibrate each connected sensor.
Program schedules: Create irrigation or climate control schedules.
Test outputs: Use MANUAL mode to verify each relay operates correctly.

CAUTION! Verify sensor readings before relying on automatic control. Keep programming manual accessible.

Specifications

Model: Agro Electro 0090 Controller.
Input Voltage: 12-24V DC or 110-240V AC, 50/60Hz.
Outputs: 6 relay channels, 10A @ 240V AC each.
Sensor Inputs: 4 analog/digital ports (0-5V/4-20mA).
Display: 4-line LCD with backlight.
Memory: Non-volatile with battery backup (7 days).
Enclosure: IP65 waterproof, UV resistant.
Operating Temp: -10°C to +60°C.
Dimensions: 200 x 150 x 80 mm.

Controls and Settings

Access menus via PROGRAM button. Front Panel: POWER, PROGRAM, MANUAL/AUTO, RESET, Navigation arrows, ENTER.

Remote: POWER, PROGRAM, MANUAL, ARROWS, ENTER, CANCEL, TEST.

Programming: Schedules (start time, duration, days), Sensor thresholds (moisture, temperature), Output sequencing, Manual override. Settings: Language, Time format, Display contrast, Alarm settings, Calibration. Security: Password protection (default 0000).

Connecting Sensors & Devices

Sensor Inputs: Ports 1-4 for various sensors. Relay Outputs: Terminals 1-6 for loads.

Turn off power before connecting.
Connect sensors: Match wire colors (red: power, black: ground, white: signal).
Connect loads: Use relay commons and NO/NC contacts as needed.
Select sensor type in menu for proper calibration.

Tip: Use shielded cables for sensors in electrically noisy environments.

Programming Operations

Supports multiple independent schedules and sensor-based control.

Enter programming: Press PROGRAM, enter password (default 0000).
Create schedule: Select output, set start time, duration, and active days.
Set sensor control: Define thresholds to start/stop outputs.
Save: Press ENTER to save program; test in MANUAL mode first.
Edit: Navigate to existing program to modify parameters.
Copy: Duplicate programs between outputs.
Monitor: View real-time sensor readings and output status.
Backup: Export programs to SD card (optional accessory).

WARNING! Do not exceed relay ratings. Test system thoroughly before leaving unattended.

Safety Features

Overload Protection: Automatic shutdown if current exceeds limits. Sensor Failure Detection: Alerts if sensor disconnects or gives invalid readings. Water Detection: Alarm if moisture inside enclosure. Password Protection: Prevents unauthorized programming changes.

Maintenance & Cleaning

Disconnect power before maintenance. Clean exterior with damp cloth; ensure vents are clear. Check connections annually for corrosion.

CAUTION! Do not open housing while powered. Use only mild cleaners; avoid solvents.

Regulatory Information

CE Certified: Complies with EU electromagnetic compatibility and low voltage directives. FCC Part 15: Class A digital device. Copyright © 2025 Agro Electro; trademarks of Agro Electro Ltd. For support, visit www.agroelectro.com or contact +1-800-555-0090.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Power supply	Check voltage at terminals; verify battery backup.
Output not activating	Programming/fuse	Verify schedule; check fuse; test in MANUAL mode.
Incorrect sensor reading	Calibration/connection	Recalibrate sensor; check wiring for damage.
Unit resetting	Power fluctuations	Stabilize power supply; check for spikes.
Communication error	Remote distance/obstacles	Reduce distance; ensure line of sight.

Reset: Press RESET for 10 seconds to clear faults (does not erase programs).

Factory Reset: PROGRAM > SYSTEM > Reset All (requires password).

Service: +1-800-555-0090; www.agroelectro.com/support