Acu-Rite Iris 06014 Instruction Manual

The Acu-Rite Iris 06014 is a digital weather station with wireless sensor technology, providing accurate indoor and outdoor temperature, humidity, barometric pressure, and weather forecast. It features a color display, customizable alerts, historical data tracking, and atomic clock synchronization. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Color LCD display, Wireless Outdoor Sensor, AC Power Adapter, Mounting Hardware, User Manual.

Installation

Unpack and inspect all components. Choose optimal location for display and sensor.

1. Install batteries in outdoor sensor: Open battery compartment, insert 2x AA batteries.
2. Position outdoor sensor: Mount in shaded, ventilated area away from direct sunlight and precipitation.
3. Set up display unit: Insert 3x AAA batteries or connect AC adapter.
4. Mount display: Use tabletop stand or wall mount hardware.

WARNING! Keep sensor away from heat sources and ensure proper ventilation for accurate readings.

First-Time Setup

Power on display unit; follow automatic setup procedure.

1. Sensor synchronization: Display will automatically search for sensor signal (may take 3-5 minutes).
2. Atomic clock sync: Unit will search for WWVB signal at night (success indicated by check mark).
3. Set preferences: Use MENU button to configure temperature units (°F/°C), time format, and alerts.
4. Calibrate sensors: Access calibration menu to fine-tune temperature or humidity if needed.

CAUTION! Do not expose display unit to direct sunlight or moisture.

Specifications

• Display Size: 5-inch color LCD.
• Temperature Range: Indoor: 14°F to 140°F (-10°C to 60°C); Outdoor: -40°F to 158°F (-40°C to 70°C).
• Humidity Range: 1% to 99% RH.
• Pressure Range: 8.85 inHg to 32.45 inHg (300 hPa to 1100 hPa).
• Wireless Range: Up to 330 feet (100 meters) line of sight.
• Transmission Frequency: 433 MHz.
• Power Consumption: Display: 3x AAA batteries or 5V DC adapter; Sensor: 2x AA batteries.
• Battery Life: Sensor: Up to 2 years; Display: Up to 1 year (battery mode).
• Operating Conditions: 32°F to 122°F (0°C to 50°C).

Controls and Settings

Access menu system via MENU button. Front Panel: LIGHT, MENU, +/-, ALERT/SET.

Display Buttons: LIGHT (backlight), MENU (access settings), +/- (navigate/adjust), ALERT/SET (confirm/set alerts).

Settings Menu: Units (Temp: °F/°C; Pressure: inHg/hPa/mbar), Time (12/24hr, DST), Display (contrast, backlight duration), Sensor (channel select, signal strength), Alerts (temp/humidity thresholds), Calibration (offset adjustments), Reset (factory defaults).

Connecting Sensors

Supports up to 3 outdoor sensors (channels 1, 2, 3).

1. Power on sensor first, then display unit.
2. Auto-search: Display will detect sensor automatically.
3. Manual sync: Press and hold SENSOR button for 3 seconds to initiate search.
4. Verify connection: Signal strength icon shows connection quality.

Tip: Place sensor at least 3 feet (1m) off ground for best air circulation.

Using Weather Features

Monitor current conditions and forecasts.

1. View current weather: Main display shows temp, humidity, pressure, forecast icon.
2. Forecast interpretation: Icons indicate sunny, partly cloudy, cloudy, rainy, snowy, or stormy conditions.
3. Pressure trend: Arrow indicates rising, steady, or falling barometric pressure.
4. Historical data: Press HISTORY to view min/max records for temperature and humidity.
5. Switch sensors: Press CHANNEL to cycle between multiple outdoor sensors.
6. Backlight: Press LIGHT to illuminate display (holds for 10 seconds).

WARNING! Forecast accuracy depends on proper sensor placement and calibration.

Alerts & Notifications

Customizable alerts for temperature and humidity.

1. Set temperature alerts: Menu > Alerts > Temp High/Low > Set thresholds.
2. Set humidity alerts: Menu > Alerts > Humidity High/Low > Set percentage.
3. Alert indication: Flashing icon and audible beep when threshold exceeded.
4. Snooze function: Press any button to silence alert for 2 hours.

Care & Maintenance

Clean with dry, soft cloth. Do not use chemicals or abrasives.

1. Display cleaning: Power off, wipe gently with microfiber cloth.
2. Sensor maintenance: Check battery annually; clean from debris.
3. Battery replacement: Replace when low battery icon appears.

CAUTION! Never immerse unit in water or use liquid cleaners.

Regulatory Information

FCC ID: XXXXXXXXXX. This device complies with Part 15 of FCC Rules. Operation subject to conditions: (1) device may not cause harmful interference, (2) device must accept any interference received. Changes not approved by Acu-Rite may void user authority to operate equipment. For support, visit www.acurite.com or contact 1-877-221-1252.

Troubleshooting

Reset: Menu > System > Factory Reset (erases all settings).

Service: 1-877-221-1252; www.acurite.com