Acu-Rite 06014 Instruction Manual

The Acu-Rite 06014 is a precision indoor/outdoor thermometer with wireless sensor, featuring a clear LCD display, temperature and humidity monitoring, historical min/max records, customizable alerts, and atomic clock synchronization. Powered by AC adapter or batteries. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Sensors 7. Monitoring Data 8. Alert Functions 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: Main display unit with LCD screen, Wireless outdoor sensor, AC power adapter, Mounting hardware, User manual.

Feature	Description
Wireless Sensor	Transmits outdoor temperature/humidity data up to 330 ft
LCD Display	Shows indoor/outdoor temp, humidity, time, date, alerts
Atomic Clock Sync	Automatically sets time/date via radio signal
Min/Max Records	Tracks historical temperature and humidity extremes
Custom Alerts	Programmable high/low temperature and humidity alarms
Power Options	AC adapter or 3x AAA batteries (display), 2x AA batteries (sensor)
Mounting Options	Tabletop stand or wall mount for both units
Backlight	Manual or auto-activated for low light conditions
Trend Indicators	Arrows showing rising/falling temperature trends
Weather Forecast	Icon-based 12-24 hour weather prediction

Installation

Unpack and inspect all components. Choose optimal locations for display and sensor.

Install batteries: Insert 3x AAA in display unit, 2x AA in outdoor sensor.
Position outdoor sensor: Place in shaded, ventilated area away from direct sunlight/rain.
Position display unit: Place indoors within wireless range (up to 330 ft clear line).
Mount units: Use included hardware for wall mounting or use tabletop stand.
Connect AC adapter: Optional for continuous display power.

WARNING! Do not expose sensor to direct precipitation. Ensure batteries are installed with correct polarity.

First-Time Setup

Power on units; allow automatic synchronization.

Sensor pairing: Display will automatically search for sensor signal (may take 3-5 minutes).
Atomic clock sync: Unit will automatically search for WWVB signal at night (can take 24-48 hours).
Set preferences: Use MENU button to configure temperature units (°F/°C), time format, alerts.
Test functions: Verify sensor connection and display readings.

CAUTION! Keep sensor and display away from heat sources, electronics, and metal surfaces that may interfere with wireless signal.

Specifications

Temperature Range: Indoor: -10°F to 158°F (-23°C to 70°C); Outdoor: -40°F to 158°F (-40°C to 70°C)
Humidity Range: 1% to 99% RH
Wireless Range: Up to 330 feet (100 meters) in open air
Transmission Frequency: 433 MHz
Display Update: Every 30 seconds for temperature, every 60 seconds for humidity
Power Consumption: Display: 3x AAA or AC adapter; Sensor: 2x AA batteries
Battery Life: Approximately 12 months (sensor), 6 months (display with backlight use)
Dimensions: Display: 5.1" x 3.5" x 1.2"; Sensor: 3.9" x 1.5" x 0.8"
Weight: Display: 6.4 oz; Sensor: 3.2 oz

Controls and Settings

Access functions via front panel buttons: MENU, SET, UP, DOWN, LIGHT.

Button Functions: MENU (access settings), SET (confirm/enter), UP/DOWN (navigate/adjust values), LIGHT (activate backlight).

Settings Menu: Temperature units (°F/°C), Time format (12/24 hr), Date format (MM/DD/DD/MM), Alarm settings (high/low temp/humidity), Sensor channel selection (1-3), Display contrast, Reset min/max records, Factory reset.

Connecting Sensors

Supports up to 3 wireless sensors (sold separately).

Install batteries in additional sensor(s).
On display unit: Press MENU, navigate to SENSOR SETUP, select ADD SENSOR.
Press button on new sensor to transmit ID signal.
Display will confirm when sensor is registered (assigns channel 2 or 3).
Repeat for additional sensors.

Tip: Place sensors at least 3 feet apart to avoid signal interference. Test signal strength before permanent mounting.

Monitoring Data

Display shows current readings and historical data.

View current: Main display shows indoor/outdoor temp and humidity simultaneously.
Check min/max: Press and hold SET button for 3 seconds to view records.
Reset records: In MENU > RECORDS > RESET to clear historical data.
View trends: Arrow indicators show if temperature is rising (↑), falling (↓), or steady (→).
Weather forecast: Icons show predicted conditions (sunny, cloudy, rainy, snowy).
Time/date: Automatically set via atomic clock; shows day of week.

WARNING! Outdoor sensor readings may be inaccurate if placed in direct sunlight or near heat sources.

Alert Functions

Programmable alarms for temperature and humidity thresholds.

Access alarms: MENU > ALERTS > TEMPERATURE or HUMIDITY.
Set high limit: Use UP/DOWN to set maximum threshold, press SET to confirm.
Set low limit: Set minimum threshold, press SET to confirm.
Enable/disable: Toggle alarm ON/OFF for each parameter.
Test alarm: Exceed set thresholds to trigger audible beep and flashing icon.
Snooze: Press any button to silence alarm for 10 minutes.

Default password for protected settings: 0000 (can be changed in security menu).

Care & Cleaning

Remove batteries before cleaning. Use soft, dry cloth only; no liquids or chemicals.

CAUTION! Do not submerge units in water. Avoid abrasive cleaners that may scratch display. Store in dry location when not in use.

Regulatory Information

FCC Part 15: Class B digital device; complies with interference limits for residential use. ICES-003: Complies with Canadian EMI regulations. Copyright © 2023 Acu-Rite; trademarks of Chaney Instrument Co. For support, visit www.acurite.com or contact 1-800-474-2147. This device may not cause harmful interference and must accept any interference received.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No display	Dead batteries/power	Replace batteries; check AC adapter connection; ensure battery polarity correct.
No sensor signal	Range/batteries/interference	Move units closer; replace sensor batteries; remove metal obstructions.
Inaccurate readings	Sensor placement	Move sensor away from heat sources, direct sun, or reflective surfaces.
Time not updating	Atomic clock signal	Place near window overnight; avoid metal buildings; manual set available.
Display fading	Low batteries	Replace display unit batteries; adjust contrast in settings.
Alarm not sounding	Settings/volume	Verify alarm enabled; check threshold settings; replace batteries.

Reset: Remove batteries for 5 minutes, then reinstall to reset all settings.

Service: 1-800-474-2147; www.acurite.com/support