Acopower 3x35W Manual

The Acopower 3x35W is a versatile power management device designed to deliver stable and efficient power distribution. It features three independent 35W output channels, surge protection, overload safety, multiple input/output ports, LED status indicators, and a compact, durable design. Suitable for home, office, or light industrial use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Three 35W output channels, Power switch, LED status indicators, Input port, Output ports, Overload protection circuit.

Feature	Description
Output Channels	Three independent 35W channels for multiple devices
Input Port	Standard AC input (100-240V, 50/60Hz)
Output Ports	Three DC output ports with universal compatibility
LED Indicators	Show power status and channel activity
Overload Protection	Automatic shutdown on overload or short circuit
Surge Protection	Built-in surge suppressor for connected devices
Power Switch	Master power on/off control
Compact Design	Space-saving and portable construction
Thermal Management	Passive cooling with heat dissipation vents
Mounting Options	Desk placement or wall-mountable

Installation

Unpack and inspect contents. Place on stable, dry surface away from heat sources.

1. Position unit: Ensure adequate ventilation around device.
2. Connect input: Plug power cord into AC outlet (100-240V).
3. Connect devices: Attach compatible devices to output ports using appropriate cables.
4. Secure connections: Ensure all connections are firm and cables are undamaged.

WARNING! Do not exceed total power rating. Ensure proper grounding of power outlet.

First-Time Setup

Power on device; verify LED indicators.

1. Power connection: Plug into AC outlet; switch to ON position.
2. LED check: All three channel LEDs should illuminate briefly during startup.
3. Device connection: Connect compatible devices to output ports.
4. Load verification: Ensure connected devices are within 35W per channel limit.

CAUTION! Do not connect devices before powering on unit. Avoid moisture exposure.

Specifications

• Model: Acopower 3x35W.
• Input Voltage: 100-240V AC, 50/60Hz.
• Output per Channel: 35W maximum.
• Total Output: 105W maximum.
• Output Ports: Three DC ports (standard compatibility).
• Protection: Overload, short circuit, surge protection.
• Indicators: LED for power and per-channel status.
• Operating Temperature: 0°C to 40°C (32°F to 104°F).
• Dimensions: Compact design for easy placement.
• Weight: Lightweight for portability.

Controls and Settings

Simple operation with minimal controls. Front Panel: Power switch, LED indicators for each channel.

LED Indicators: Green = power on/channel active; Red = fault/overload; Off = no power/channel off.

Operation: Switch ON to activate all channels. Each channel operates independently. No user-adjustable settings; automatic protection features engage as needed.

Connecting Devices

Connect compatible devices to output ports.

1. Ensure unit is OFF before connecting devices.
2. Use appropriate cables for each device.
3. Connect device to any available output port.
4. Power on unit; verify device receives power.

Tip: Label cables for easy identification. Do not daisy-chain multiple devices on one port.

Operation Modes

Simple on/off operation with automatic management.

1. Normal operation: Power on, connect devices, LEDs show active status.
2. Overload condition: If channel exceeds 35W, LED turns red and channel shuts off automatically.
3. Recovery: Reduce load on affected channel; cycle power to reset.
4. Simultaneous use: All three channels can operate independently at full capacity.

WARNING! Do not attempt to bypass protection features. Monitor device temperatures during extended use.

Safety Features

Built-in protections: Overload shutdown, short circuit protection, surge suppression, thermal protection.

Care & Maintenance

Unplug before cleaning. Use dry, soft cloth; avoid liquids.

CAUTION! Do not open casing; no user-serviceable parts inside. Keep vents clear of obstructions.

Regulatory Information

Complies with relevant safety standards. CE, RoHS compliant. Copyright © 2025 Acopower; all rights reserved. For support, visit www.acopower.com or contact 1-800-555-ACOP.

Troubleshooting

Symptom	Possible Cause	Corrective Action
No power to any channel	Power source/switch	Check AC outlet; ensure power switch is ON; verify power cord connection.
One channel not working	Overload/connection	Reduce load on channel; check cable and device connection; cycle power.
LED red on channel	Overload/short circuit	Disconnect device; check for shorts; reconnect with lower power device.
Unit gets hot	Ventilation/load	Ensure vents are clear; reduce total load; allow to cool in well-ventilated area.
Intermittent power	Loose connection	Check all cable connections; ensure secure fit at ports and devices.

Reset: Power off, disconnect all devices, wait 30 seconds, power on.

Service: 1-800-555-ACOP; www.acopower.com